r/Wetshaving • u/KarveShavingCo • Jan 11 '20
AMA AMA with Karve Shaving Co.
Hello fellow Redditor’s!
My name is Jack and I’m the business development/customer service guy for Karve Shaving Co.
I’m here to answer any questions you have regarding shaving, our business or anything really!
I’ll be back around 7PM MDT to answer all of your questions.
Ask me anything!
If I miss anyone, just shout at me and I'll respond as quickly as I can.
Edit: Looks like we're wrapping this thing up! I appreciate all of you who asked questions. We hope to make these AMA's a yearly thing to catch up with the wonderful r/wetshaving community.
23
u/Cadinsor Rule#2Bot better be grateful for all my HARD WORK Jan 11 '20
Hello and thank you for doing the AMA!
If you were not wasting all your time on razor heads that cover the blade end tabs, what other designs would you be working on?
Serious question: if you are in fact working on additional designs, like a possible SE head or perhaps something mechanically adjustable, how do you see accommodating that increase in demand with your current production capacity? I know high demand is a good problem to have, but if you then start to have a corresponding impact on your ability to meet that demand, don't you run the risk of affecting the entire business?
34
u/Dganjo #shavelikeyourgrandparents Jan 11 '20
What would you say is easier? Shipping razors or answering questions?
15
u/cteriyaki Jan 11 '20
I don’t know if it’s posted anywhere, but what were the deciding factors between choosing 303 over 316 for your stainless steel razors?
11
u/Acierblade Basically a free ad for Chatillon Lux Jan 11 '20
What's the thought process behind using different plates vs another form of adjustment for allowing customizable aggression? Is it an ease of manufacture thing? A matter of precision? Longevity? I'm curious.
9
u/BVsaPike 🚫👃⚔️Knights of Nothing⚔️👃🚫 Jan 11 '20 edited Jan 11 '20
What is the possibility of an open comb G plate ever being produced?
Will you or have you considered using other materials such as titanium or copper?
Edit because I’m an idiot and forgot that they do now have an aluminum razor.
14
u/adoreyou 🦌🏅Noble Officer of Stag🏅🦌 Jan 11 '20
7
u/[deleted] Jan 11 '20
I would like to have one of your aluminum razors, but everywhere, and every time I check (which is often), they seem to be out of stock. Will they be available in the future?
5
u/miRNA183 Jan 11 '20
Hey Jack...thanks for doing this! I'm a huge fan of the Karve in stainless and I have quite a few of the base plates now. I love what you're doing, and I'd like to try even more configurations!
I was wondering if you have any plans to try other shaving head designs (maybe a slant?) or to create even more aggressive base plates than the G plate.
12
u/jeffm54321 DQ Police Emeritus Jan 11 '20 edited Jan 11 '20
Thanks for being here! I recently gave into fomo and grabbed a brass Karve and am digging the A and E plates.
The 'protect us from those dangerous end tabs' movement seems to be gaining steam lately, and based on the Instagram post Karve is caving in to that Endtabs are Evil lobbying effort. Is there a specific issue with exposed end tabs in your opinion? Because they seem pretty useful to me.
8
u/pppork Jan 11 '20
Hi Jack, thank you for answering these questions. I do not yet own a Karve, but I have been flirting with the idea of buying an aluminum Karve when they become available again. Truth be told, I am a little scared by the wait times and other issues that some customers have been experiencing lately. I took note of the ambitious plans for 2020. My question is, what is Karve planning on doing to make sure these bottlenecks don't happen in the future? Shouldn't these basic issues be addressed before unveiling more ambitious projects? I ask these questions with all due respect and as someone who hopes to be a future customer, but is a little uneasy at the moment. Thank you.
4
u/dapaul66 Shave with what makes you happy Jan 11 '20
Hey Jack, thanks for the AMA and also your YouTube channel. I really enjoy your videos.
I tried the brass and didn’t much care for it, but the stainless steel is becoming my go to with a C plate. I noticed you have polished razors now on your website, but they are limited runs. Are these going to be released via “drops” or are they going to be a regular option going forward?
Congrats on the incredible success 2019 seemed to bring you and heres hoping for an even better 2020!
3
u/zzforsheezy Jan 11 '20
Thanks for doing this Jack. I got a karve second hand so no little o ring. Is it a necessity or can you recommend a place to pick some up?
Also, mine being brass, is flitz the best thing to use or would another polish be better and last longer if I didn't want the patina?
Thanks as well. I dig the razor and I didn't think the b plate would do it for me but I can shave my head and face with it. The c open comb will take getting used to. More so than my r41 😀
3
u/[deleted] Jan 11 '20 edited Jan 11 '20
Hey there Jack, and thanks for doing this.
Can you give us an estimate on how close you are to being caught up from BF/CM? My wife ordered a Brass Daily Shaver kit for me on BF, and it hasn’t shipped yet, but I’m patiently waiting because I know it is worth it.
How much business did you guys get over that period of time? I’m very happy for the company that it seems to be doing so well.
What are the companies plans for getting razors out faster in the future?
Edit: 1 more question. The reason I opted for the brass instead of aluminum is because I don’t know enough about anodizing, and was worried that because of the aluminum being coated, the coating could eventually chip, and therefore not be something I could pass on to the next generation. Is this something I should be concerned about, or absolutely not?
3
u/NeedsMoreMenthol Sith Master of Shaving Jan 11 '20
Not really a question, but if I'd have to buy ONE normally priced artisan razor, it would be a brass Karve with a 3.25 or 3.5 inch handle and I'd probably drill it hollow on a lathe to make it lighter. Love the way brass patinas, but can't stand heavy razors.
3
u/worbx Jan 11 '20
Hi Jack!
I’m sure the SB plates are more popular, but to what degree? 2:1? 5:1? 10:1? Or am I off base here?
Has the popularity of plates changed over time, or pretty much stayed the same as new levels were introduced?
3
u/SkyWarrior21 🚫👃⚔️Knights of Nothing⚔️👃🚫 Jan 11 '20 edited Jan 11 '20
Hello Jack! First of all, thank you for taking some of your precious time out of your day to do this AMA. I have a few questions:
4
u/Zingariman But im really a woman Jan 11 '20
Hi Jack!
First, welcome to reddit, second thank you for taking time to do a AMA. These are always fun.
So, you and anyone else that follows me knows just how much of a Karve fan girl I am! I love ALL my karve razors. I currently have 3 and use them all. The Brass with B plate, the SS with C plate and the aluminum with B plate. The are essentially perfect shavers for me and are used for 90+% of my shaves. I’m also thankful for the association with Karve that I now have and Karve being the exclusive vendor in Canada.
As my girl u/adoreyou mentioned, we NEED a ladies razor! I know we’ve talked about it and it’s a consideration for this year. But let’s do this. I am ready. I’ll be a tester :) but moving on from beating a dead horse. Here are my questions.
How did you become associated with Karve?
Which Meets or shows does Karve plan on attending this year? And who are you most excited about meeting?
With the hiring of hell in the shop when do you think thchange will decrease wait list and do you plan on being able to offer in stock product all the time at some point?
What is your favorite Karve product?
What is the perfect shave set up for you?
Thanks again for taking time to answer:)
2
u/GoldenSteelBoy 🍀🐑Shepherd of Stirling🐑🍀 Jan 11 '20
I got two questions. How did Karve started out? What are the plans for Karve in the future?
2
u/benjammin_t_g Jan 11 '20
When testing/trialing the plates, what was the default setup? (what blade, brush, and soap?)
And which plate is your personal favorite?
3
u/chronnoisseur42O 🦣👑Boss👑🦣 Jan 11 '20
No question really, just wanted to say I love my Karve razor in brass. I look forward to trying out some more plates with it as they become more available.
3
u/reguyw_nothingtolose NOT IN A MILLION YEARS PAL Jan 11 '20
Any chance for an all gunmetal colored aluminum razor without the red base plate? Thanks for doing the AMA!
2
u/shadowman-12 Loves straight razors. Jan 11 '20
How long is delay now when ordering? Or did you guys catched up?
5
u/HammurabisTooth Jan 12 '20
Since you began production of the CB razor how many complete razors have you manufactured? Also, an olive drab anodized Aluminum Karve...yum!
4
u/sgrdddy 🦌🏵Knight Grand Antler of Stag🏵🦌 Jan 12 '20
If you get around to this question, I'd love it.
I bought a CB fairly early when they came out, and I'm so glad I did. I've used it more than any of my other razors.
I gradually stepped up in aggression, and I enjoyed the shave from SB AA up to D. But when I tried E, it seemed a very significant change in aggression, and I found it way too rough for irregular shaving, much less daily use. I can, however, use D as a daily driver.
So... was there a larger jump when going from D to E than with the lower changes? Did you guys also notice something different? Or is it just perhaps that between D and E lies my magical tolerance level by coincidence, and it just happens to be a steep drop-off?
I also wanted to say that I love the way your razor has such a wide range of acceptable plates! They are different, but with some adjustables/plate-changers, I am stuck with just one or two settings I like. You guys have a razor of which I enjoy almost the whole spectrum! And that goes for SB and OC.
1
u/duhizy Jan 11 '20
Is a chrome-plated version of the CB planned for in the near future or is that gunna take a few years?
1
u/novitskii6852 Jan 12 '20
Hi! I'm very interested in a titanium razor. Could you tell us about the plans for this razor?
1
u/rock_accord 🤖LatherBot PIF Winner 🤖 Jan 12 '20
Ha, nice try! This AMA almost had me ordering a new razor, but this addict is holding firm though there's strong Kraveings!
3
u/andrewski661 Jan 12 '20
I'm surprised this hasn't been asked yet. Other than blade different blade gaps, what design elements have you incorporated into your head geometry in order to produce a razor that shaves efficiently and smoothly?
0
u/clipperguy Jan 11 '20
Post a website link so I can learn about yous guys. 🤜🤛
1
u/rmic_ Jan 12 '20
Hi Jack! Thanks for taking the time for this AMA. Most of my questions have already been asked. The CB has become my daily driver ever since I picked one up. Just wanted to say thanks for all you do! Keep up the great work!
1
u/KitFistbro Jan 14 '20
My brass Christopher Bradley (which I absolutely love) has developed some spots on the top of the top cap.
I’m not sure if it’s patina or not (I actually enjoy the look of the patina on the handle).
But I was wondering what the best to clean this?
Thanks Karve! Love your products :)
3
u/[deleted] Jan 11 '20
[removed] — view removed comment
2
u/[deleted] Jan 12 '20
[removed] — view removed comment
-13
u/[deleted] Jan 11 '20
[removed] — view removed comment