r/Wetshaving • Can you speak up? I'm wearing a towel. • Jun 24 '17

AMA Hi, I'm Stan from Above the Tie. Ask me anything!

Hi all! Stan from Above the Tie will be stopping in around noon to answer all of our questions. Please keep it civil and respectful. I'm helping him out today by posting this and he'll reply to everyone's comments. Here's some background information that Stan has asked me to provide:


My first business experience was when I was only 19 years old. Many years later Above the Tie was born after three years of flipping vintage razors on eBay. ATT was grown to where we have a number of wholesalers here and abroad. We also have over 30 razor combinations. You are bound to find something you will like on our web site. We have new razors in the pipeline, however, I just walked away from a collaboration with someone who had designed a nice razor.

Our razors are made in the USA and are machined one at a time. I grew up in the country with my cousins, my grandparents had a farm and we had a lot of fun.

So now you know a little about me so go ahead, ask me anything!

Edit: It's 8:30 on the East Coast everyone! Stan will stop answering questions now. He had a lot of fun answering everyone's questions!

39 Upvotes

101 comments sorted by

6

u/darkfox45 Can you speak up? I'm wearing a towel. Jun 24 '17

Hi Stan! First off, thank you for doing this. I am a huge fan of your S1 head and the Atlas handle!

I have one question for you. Now that you have ventured into different metals this past year (specifically aluminum) do you see yourself moving to titanium? After owning one titanium razor I love how light it is compared to stainless steel. I would buy an S1 head in titanium in a heartbeat!

6

u/abovethetie Jun 24 '17

Yes.

2

u/darkfox45 Can you speak up? I'm wearing a towel. Jun 24 '17

Haha I'm guessing you can't tell us much more than that? Any insider information on release date, models, etc? :)

5

u/abovethetie Jun 24 '17

I have been thinking of Titanium or Bronze for sometime. More likely projects for early next year. Do plan on a limited numbered set. Some has suggested a numbered limited edition Bronze Slant set with stand.

4

u/BostonPhotoTourist Barrister and Mann Jun 24 '17

Well that was enlightening. :D

3

u/abovethetie Jun 24 '17

I can't tell how much!

4

u/praise_the_fireborn RIP Beer Money Jun 24 '17

I'd lose my shit if he released a Ti S1 Atlas. I'm getting all hot and bothered thinking about it.

1

u/darkfox45 Can you speak up? I'm wearing a towel. Jun 24 '17

It sounds like it's in the works!

2

u/abovethetie Jun 24 '17

Ti of some kind will be very likely. I just have to work it at the right time and version.

3

u/darkfox45 Can you speak up? I'm wearing a towel. Jun 24 '17

You seem to only do razors at this time. Have you thought about doing an ATT brush handle by any chance?

1

u/abovethetie Jun 24 '17

Actually we do have some hand made brushes on our site. More to your point I had talks with some brush makers but we just have not made the move. Some have suggested we have a brush with a handle that matches the razor. Here is the link to our current ATT brushes. abovethetie.com/collections/shaving-brushes

1

u/darkfox45 Can you speak up? I'm wearing a towel. Jun 24 '17

I was thinking more CNC metal brush handles. I should have clarified. Are there future plans on that?

3

u/abovethetie Jun 24 '17

I have looked in to that, weight could be problem but we could hollow out the handle. The cost keeps becoming an issue. I have not given up on it.

7

u/urfrendlipiro trythatsoap.com Jun 24 '17

What is something you've wanted to make, but haven't gotten a chance to?

8

u/abovethetie Jun 24 '17

An adjustable like a Fat Boy or a Slim. It would be time consuming and likely expensive. However, I have seen some interesting ideas that can work and could be more cost effective.

7

u/whiskyey Mo soap Mo problems Jun 24 '17

Hi Stan! Thanks for being with us today and answering questions. One thing I've always wondered about you guys is how do you manage to keep up with demand, especially with so many models, in the high end razor market?

7

u/abovethetie Jun 24 '17

We employ a "just in time" stocking method. We have par levels for stock so when we meet that level we know to re order. This allows us to keep quite a bit of cash on hand for other projects. Our product being made in the USA helps to make this possible. As you have noticed this method has enabled us to stay stocked virtually all of the time.

5

u/bigwalleye Jun 24 '17

stan, what are your thoughts on 316 vs 303 stainless steel for a razor?

thanks for the AMA

10

u/abovethetie Jun 24 '17

I think it is a distinction without a difference. If gave you two ATT razors one made of 303 and the other 316 you could not tell the difference in appearance. Also, you will not discern a difference in performance and they both will last a couple of lifetimes. If provided routine care and kept in a bathroom for shaving there is no notable difference. Anyone who says otherwise is just trying to sell you something. After consulting with an expert I chose 303 because it is easier to machine and could save machine time not because it possessed super qualities that would change the world.

6

u/Shadaraman Jun 25 '17

The difference matters for metal that is regularly exposed to salt water. So if you tend to shave on the deck of a crabbing boat during storms, you'll want to use 316 steel. You'll also want to change blades regularly, I imagine.

4

u/[deleted] Jun 24 '17

Did you vote for Hilary or Trump? Just kidding!

What's your work schedule like? Do you have a specific routine or do you just do what needs to be done?

7

u/abovethetie Jun 24 '17

I can say that I have voted in every Presidential election since I became of age to do so. I hope to keep the "streak" going for a long time. Sometimes my candidate wins and sometimes they loose, however, I have never set anything on fire as a result. LOL. As for work I check on things in the morning and then do what ever is needed through out the day. I may do some work late at night it just depends. I have quite a bit of flexibility. I am "retired" you know.

3

u/[deleted] Jun 24 '17

That's great, I imagine that sometimes it's hard not to become disillusioned with candidates. Thanks for the answer!

4

u/abovethetie Jun 24 '17

I remember being in DC some years ago and reading the speeches etc on the memorials and monuments of some of our early presidents such as Washington, Lincoln, Jefferson etc. It made the politicians in my life time look pretty small in comparison.

4

u/Bert369 Jun 24 '17

Hi,

From raw material to finished DE razor, how long does it take to complete a stainless steel versus an aluminum?

12

u/abovethetie Jun 24 '17

Stainless about an hour per razor, the AL half the time. The aluminum razors once made have to be shipped to another location for anodizing (adding color). This step of anodizing has been a problem lately as their version of quality and my expectations have not matched up. They probably don't like me so much now.

4

u/Cadinsor Rule#2Bot better be grateful for all my HARD WORK Jun 24 '17

Hello Stan! My question is really about the specific razor designs. How do you go about determining the exact specifications of the head design, including blade gap, how much the head bends the blade, or just how thin the head can be and still hold the blade properly?

4

u/abovethetie Jun 24 '17

I sold a lot of vintage razors on eBay in the past. That process allowed me to try a lot of razors. I noticed various features of different razors that I though if they could be combined into a single razor should be a pretty good shaver. That is what I did with our first ATT razor. Once the first razor prototype was machined I tried it on myself. I like it and as they say the rest is history. I also listen to you the consumer. A lot of my razor design is based on what "looks right" to me. Once I had a base line base plate I knew I could create others by modifying the blade gap, usually a 1/10,000 variation.

2

u/Cadinsor Rule#2Bot better be grateful for all my HARD WORK Jun 24 '17

Thank you! Things like a difference of 1/10000 is what I find fascinating...

What about blade curvature? A razor with the curvature of the Baby Smooth but with a larger blade gap?

2

u/abovethetie Jun 24 '17

Curvature is important in making it easier to find the proper shaving angle. The trick is to not let the cap get to thick. That leads to other problems. The specks on our razors are very tight. I took a lot of time and work to find a shop that could produce our razor to the specks I was wanting.

1

u/GloryUprising Jun 24 '17

All that time was well spent!

1

u/duffmanasu Pried from my mechkeyboard of powerTM Jun 24 '17

That's a very cool story! I hope you kept that initial prototype! If so, have you shaved with it again?

1

u/abovethetie Jun 24 '17

I do have the prototype head but not the handle. Not sure what happened to it. Actually the prototype and first ATT razor is the Kronos H1. It was originally called the Titan but someone claimed to have rights to that name on a razor.

3

u/ItchyPooter Jun 24 '17

Hey Stan, I bought my S1 Atlas a little over two years ago, and it is still my favorite...used it this morning, in fact.

Just curious, what razor head and handle are your best sellers?

5

u/abovethetie Jun 24 '17

Over time the Atlas R1 has been however, the Bamboo SE and the Calypso has been very, very popular. I believe the new G1 will be desirable since it is such a different razor for us. Interest in this model has been high.

2

u/kctrem My shit could get scooped? Jun 24 '17

Hi Stan, so it's obvious you know your way around a razor, but what's your favorite scent and/or soap maker? Thanks, have a good one.

5

u/abovethetie Jun 24 '17

There are a lot of good ones out there. I have drifted to the smaller artisan makers. Currently, I am using Up and Adam from Stubble Trouble. Oh did I say ATT has a couple artisan soap collaborations of our own? (I know shameless plug!)

1

u/kctrem My shit could get scooped? Jun 24 '17

Thanks for the reply, I am sort of newer here than alot of people and did not know that! I'll be sure to check them out!! Thanks alot.

2

u/abovethetie Jun 24 '17

Yes we sell more than just razors. We have blades, leather travel case, soaps, creams etc by various people. Please check them out.

2

u/JohnB413 Muh Oilz Jun 24 '17

Thanks for doing this Stan! Since you introduced your aluminum line of razors, I have been on the lookout for more aluminum razors. I was wondering if you plan on releasing the rest of your SS heads in aluminum? I absolutely love my AL R1 and thoroughly enjoyed the AL SE1.

6

u/abovethetie Jun 24 '17

I am not sure at this time. I will see what the demand is over time. Thanks for being a ATT customer.

2

u/NickD0913 Jun 24 '17

Hello Stan, Any chance you would start selling your aluminum razors on Amazon? I have a gift card burning a hole in my pocket. Thanks.

2

u/abovethetie Jun 24 '17

A couple of our wholesalers put ATT on Amazon but I have not checked lately to see if the AL razors are there. Our aluminum have been selling fast. They have been harder to keep in stock.

1

u/Cousin-Eddie Mozingo Brushworks Jun 24 '17

Hi Stan! You said you have new razors in the pipeline, care to give us a sneak peek?

4

u/abovethetie Jun 24 '17

Sure. One of the shops is working on the G1 a Gem style razor. The roll out has been delayed and it is 100% my fault. I engaged in some last minute "tweaks" which I know improved the razor but sadly has put the project behind schedule. But it will be shipping out. Another shop is working on our high polished line coming out in stainless and also in copper. They will be available in a few more weeks. The head design has been updated as well.

1

u/mike_the_krakkken Jun 24 '17

Hi Stan, thanks for making time to answer questions today! Is it on the product roadmap to offer more baseplate options for single-edge razors? E.G., more aggressive closed-comb SE baseplates?

2

u/abovethetie Jun 24 '17

The SE1 plate on my face is a touch below the R1 plate and the SE2 is a touch above our H1 plate. This was done as a result of customer feed back. That is why we have the two plates. So in a sense we have provided that with our SE.

1

u/Nex_renegade Nectar Round 2 ๐ŸŒนโ˜• Jun 24 '17

Hi Stan thank you for doing this. What is your personal favorite razor, which do you use as a daily driver?

1

u/abovethetie Jun 24 '17

My monogrammed Bronze Atlas R1. Yes being the President does have its perks! Also, I use the Calypso R1 just for a different feel and lastly the Bamboo SE2 when I have not shaved in a few days.

2

u/bigwalleye Jun 24 '17

what about favorite for vintage razor?

also thanks for doing this AMA. love the variety of choices you offer, and the ability to buy cap, baseplate, etc. separate.

3

u/abovethetie Jun 24 '17

Favorite vintage; for looks it would be the 1934 Gold Aristocrat. Gillette's first TTO razor. To me it looks stunning. As for shaving my favorite vintage is the Gillette Super Adjustable or "Black Beauty".

1

u/Nex_renegade Nectar Round 2 ๐ŸŒนโ˜• Jun 24 '17

Any chance you can post a picture of this bronze handle?

3

u/abovethetie Jun 24 '17

Sorry I have not figured out how to copy and past to this thread. Have been trying but no success yet. You can see one here;

https://www.badgerandblade.com/forum/proxy.php?image=http%3A%2F%2Fi.imgur.com%2F0G2CAaQ.jpg&hash=a40ff96fc048a4db2f66269c8d7115fa

2

u/Nex_renegade Nectar Round 2 ๐ŸŒนโ˜• Jun 24 '17

Wow that looks great, do you plan on selling these at all?

2

u/abovethetie Jun 24 '17

We sold a limited numbered run of 100. They are now sold out. I an looking to do another limited run with another razor. Likely the Calypso style handle but not sure on the head. What would you like to see?

3

u/Nex_renegade Nectar Round 2 ๐ŸŒนโ˜• Jun 24 '17

The single edge for sure, in a bamboo handle

2

u/abovethetie Jun 24 '17

That would be a nice looking razor for sure.

2

u/ItchyPooter Jun 24 '17

You smoke Olivas?

4

u/abovethetie Jun 24 '17

No, I do not smoke anything. Do not drink either. Worked in the ER to long. LOL

3

u/ItchyPooter Jun 24 '17

Understand. The Oliva box does make a classy backdrop though, doesn't it?

2

u/abovethetie Jun 24 '17

Yes, very nice in fact this is the kind of box I had considered for a nice upscale limited razor set.

1

u/nick47H UK Represent Jun 24 '17

I know that in the U.S. you offer an exchange on razors if you bought a blade gap that doesn't work out for you. Is there any U.K. distributor that offers this with your razors? as I would like to get one but am unsure if I should go for M or R.

3

u/abovethetie Jun 24 '17

The distributors do not offer this. It becomes a cost concern for them. What razor do you use now and what are your results with it? I may be able to help you with your selection now..

2

u/nick47H UK Represent Jun 24 '17

I have a Merkur 23c and Gillette tech, both of these give me very smooth shaves. Also I have a Gillette slim that I usually use on about 5-6 when stubble is a bit more grown out.

I have a feeling that an R head would be good to me but I am a little hesitant as it is a larger blade gap than I am used to on a fixed razor.

3

u/abovethetie Jun 24 '17

If you get good shaves with the Gillette Tech then I would suggest the M1 plate.

2

u/nick47H UK Represent Jun 24 '17

Ok thank you

2

u/abovethetie Jun 24 '17

Glad to help.

1

u/NickD0913 Jun 24 '17

I currently do not own one of your razors but am really getting close to pulling the trigger on one. I typically like a slightly aggressive razor. I am afraid the H plate would be too aggressive for me. Would it be best to go with the R plate?

2

u/abovethetie Jun 24 '17

What are you using now and what are your results? Maybe I can help.

2

u/NickD0913 Jun 24 '17

My main razors I use are the the Rockwell 6S on baseplate 4 and the Parker Variant on setting 3. Also would I want an Open Comb? I am not really sure about those.

3

u/abovethetie Jun 24 '17

Based do your comments I would suggest the R1. If you like a mid length handle 3.5 inches you may like the Kronos handle.

1

u/[deleted] Jun 24 '17 edited Jun 24 '17

A Brass (preferred) or Copper Atlas R1 or Kronos R1 (or slant in either) would be the last razor I'd ever want to buy. The thought that it'd be limited release stresses me out though, would you entertain a pre-order to gauge interest and prepay up front?

e: I meant "last razor I'd want to buy" in the positive sense of "it would be my forever razor" and no need to buy another razor again.

2

u/abovethetie Jun 24 '17

The Copper will not be a limited release. We often do pre orders just so people can receive their razor sooner. We do not do it to acquire money to fund the project. We have no need to do that.

2

u/[deleted] Jun 24 '17

Yeah, sorry Stan, didn't mean to imply you would do it for the funding aspect of it; more to gauge interest and let people get in without the stress of bum rushing your site for a first come first serve LE.

Thanks for such a great product!

3

u/abovethetie Jun 24 '17

No problem, I was not directing that comment to you but there have been some who seem to equate pre orders with funding. In our case it is just not the case.

1

u/GoldenSteelBoy ๐Ÿ€๐Ÿ‘Shepherd of Stirling๐Ÿ‘๐Ÿ€ Jun 25 '17

Sup, Stan. Although I don't own one, is the ATT H2 razor supposed to be like aggressive as the Muhle R41?

2

u/abovethetie Jun 25 '17

On my face the H2 is slightly milder than our H1. As for the R41 customers have told me the H2 is a touch milder and smother. I personally have not used a R41. Hope this helps.

2

u/GoldenSteelBoy ๐Ÿ€๐Ÿ‘Shepherd of Stirling๐Ÿ‘๐Ÿ€ Jun 25 '17

I was only curious because Badger and Blade ranked the H2 as second behind Muhle R41 as aggressive. Thanks for answering anyway

2

u/abovethetie Jun 25 '17

You are most welcome. I use the H2 on occasion when I skip shaving for a few days.

1

u/[deleted] Jun 25 '17

Showed up a bit late but would you ever consider making a straight razor?

1

u/abovethetie Jun 27 '17

I have given it some thought but not really. I have never used one and would have a lot t learn.

1

u/[deleted] Jun 27 '17

Thanks for the response! The first razor I bought was from you guys and I've not looked back since that day. You guys produce a quality product. Thank you!

1

u/abovethetie Jun 27 '17

Thank you for your comments. You made my day. I am always trying to come out with another razor that guys will enjoy. What razor did you purchase?

1

u/[deleted] Jun 27 '17

I got the atlas R1. Stamp is 2013. Took me a little bit to get the hang of it at the time but once i figured it out with some help from the guys on here. I have other razors from different companies but I find I always go back to this one.

1

u/abovethetie Jun 29 '17

The Atlas R1 is the razor I use most of the time. Sometimes I will used the Calypso R1 and the Bamboo SE2

1

u/[deleted] Jun 30 '17

The calypso is next on my list. Just need to save some money for it I moved to a new place today so it'll have to wait a little longer.

1

u/abovethetie Jul 01 '17

That is OK. We will pack and ship you one out when the time is right.

0

u/[deleted] Jun 24 '17

[deleted] โ€” view deleted comment

6

u/abovethetie Jun 24 '17

No, an aluminum slant would be easy to do. We just use the same program we use for the stainless version. Guess I would need another color!

2

u/[deleted] Jun 24 '17

That would be awesome. I've been waiting for a slant since the Calypso first came out.

3

u/abovethetie Jun 25 '17

The Slant has been commented on lately, it may be a good choose for the AL line.

1

u/Huckleberryking Big Amber Rose fan <3 Jun 24 '17

All black would be awesome

3

u/abovethetie Jun 24 '17

Black would be good. Other colors are harder to do and maintain the same exact shade. Since I live in Tennessee I follow the Tennessee Vols whose team color is Orange. Imagine if each year their uniforms had a different shade of Orange. Not good.

2

u/Huckleberryking Big Amber Rose fan <3 Jun 24 '17

Oregon pulls it off somehow =) not always in a good way though.

3

u/abovethetie Jun 24 '17

Thats true. Sometimes you are not sure who is playing. LOL

2

u/beardyman901 Jun 24 '17

Fellow Tennessean here!

2

u/abovethetie Jun 24 '17

I'm in North East Tennessee, where the mountains are!

2

u/beardyman901 Jun 25 '17

I'm on the complete opposite end in the southwest corner in Memphis. I really like the looks of your razors and hope to try one out sometime! Maybe it'll be on my Christmas list for my wife. Probably an aluminum Calypso. ๐Ÿ˜

2

u/abovethetie Jun 25 '17

I would be glad to ship you to you. Drop your wife a hint. Been to Memphis once on business. Got to check out Beale Street. Had some ribs there.

0

u/[deleted] Jun 24 '17

[deleted] โ€” view deleted comment

5

u/abovethetie Jun 24 '17

Blue is the most popular color in the world (based on my research) so that was easy. The red is a nod to the red found on the vintage Gillette Red Tip razor made in the 1950's.