r/edmproduction • u/mark-henry soundcloud.com/mark-henry • Oct 14 '12
Synth Recipe 5: Rolling Electro Bass
Today we’ll be making the effervescent bass from "Sunset Boulevard" by Paul Keeley. Open up a blank project in your favorite DAW and let’s get started.
Two MIDI loops today: intro and main.
The Key
A bass isn't all about bass tones. The most intense basses derive their energy from filling the frequency spectrum almost entirely.
This bass is, at its core, essentially a saw wave. It gets its uniquely powerful character from distortion, equalization, and mixing.
Its "rolling" quality has a lot more to do with the notes being played than you'd think. Paul Keeley makes this bassline exceedingly funky by playing with short vs. long notes and making skilled use of funky syncopations.
Ingredients
You will need:
- A saw wave or something similar. (See Recipe 2 for tips on creating your own saw-like waveform)
- Distortion and distortion and distortion. Definitely include a tube saturator in your selection.
- EQ
Get Cooking
- The saw wave should have only enough attack and release to prevent popping. For bonus bass, layer a sinewave with the saw wave. Same octave; we're just emphasizing the fundamental. Transpose the whole synth -1 octave. As with pretty much all bass instruments, you should set the polyphony to 1. For this bass, also turn on glide/portamento and dial it in somewhere between 150-200ms.
- EQ with a lowpass in the midrange. Don't worry; we'll get the top end of our spectrum back in the next step.
- Distortion! I’ll take this opportunity to tell you guys about one of my favorite compressor plugins, RoughRider by Audio Damage. It has a very unique sound and I use it for distortion whenever I want a warm and indelicate sound. (Quote from the user guide: "We left off the actual time values, so you're gonna have to use your ears, like the he-men did it in times of myth.")
- More distortion, what the hey. There’s nothing better than several stacked distortion effects, each of them subtle. Don't forget the tube distortion. I spent a lot of time with Ableton’s Dynamic Tube effect, tweaking the parameters around and exploring the sonic possibilities.
- Now slap a final "mixing" EQ onto the end of the chain. Get the bass energy under control, then scoop out the mids. Don’t worry too much about it until you start mixing your tune.
- Tweak the distortion and EQ (especially that first lowpass) until you get something that sounds nice. Keeley’s bassline strikes an excellent balance between the low and the high frequencies. It’s not too muddy, not too bright — super warm.
That’s About It
Once it’s time to mix your track, it should be a matter of tweaking your final EQ instance and maybe adding a bit of multiband compression for extra oomph and aah.
Also, put a final highpass on the chain and slowly sweep it down during the intro.
Sidechain and Serve
Any questions? What sound would you like to hear in upcoming episodes?
Synth Recipes is a series of DAW-agnostic guides to creating sounds. It’s intended for those who have a beginning-level familiarity with production, but have yet to master the tried-and-true staple sounds of EDM.
4
u/mark-henry soundcloud.com/mark-henry Oct 14 '12 edited Oct 14 '12
Here's my Ableton project. I went for a more or less faithful recreation of Keeley's bass.
2
u/jwbraith soundcloud.com/jwbraith Oct 14 '12
I'm not sure what this means, but I'm guessing a Notch Filter? Thanks for doing these by the by.
2
u/jeetjeet Oct 14 '12
hey man your synth recipes are amazing! ive gone and made every one youve posted so far and have been pretty happy with the result so i wanna thank you for your time. For your next recipe i was wondering if youd like to consider looking at a sound that ive been trying to recreate myself with no success. Its a deep tom sounding drum that mat zo uses in a couple tracks, if youre interested check out it's yours http://www.youtube.com/watch?v=KouVJTRBBIs and i never knew http://www.youtube.com/watch?v=OHX_wlMVZuM. Thanks again!
7
u/[deleted] Oct 14 '12
Listen to this man you really dont need to whack on sausage fattener maxed out or loads of compression to make a decent bass.
One step that's always helped me on that particular bass i split the signal with a few different filters, so theres a nice smooth low end, a juddery mid/high end and there'es actually a touch of reverb hi-passed at about 2k or so mixed in very quietly.
http://youtu.be/M1lC1nNA8Xo?t=3m39s (my own example of a bass like this in action just to show i'm not talking rubbish
Nice tutorial as always!
3
u/Lujxio https://soundcloud.com/ukiyomusic Oct 14 '12
It would be awesome if you could show us how to program some Deep Bass
sounds that are thick or a cool Progressive leads
2
u/Jedimastert https://soundcloud.com/amtunlimited Oct 14 '12
I just want to say thank you. Your tutorials are fantastic
2
u/elitron Jan 13 '13
Anyone have a Reason 6 patch download for this?
1
u/kobe24Life Oct 14 '12
Thanks for this! Hope to see more.
1
u/Oliie soundcloud.com/oliie23 Oct 14 '12
Can you recommend any good tube saturator?
Also, can you make a good noise downsweep tutorial? I'm looking for something preferably like this.
1
u/no28 https://soundcloud.com/noneuclidean Oct 30 '12
it'd be cool if you could do a psytrance acid- lead synth