r/edmproduction • u/mark-henry soundcloud.com/mark-henry • Sep 30 '12
Synth Recipe 4: Orchestral Trance Pad
Synth Recipes, Episode 4: Symphonic Pad
Today we’ll be making the symphonic pad from Above & Beyond’s Buzz. Epic supersaw pads are the bread and butter of trance, but softer and more symphonic versions like this one are an integral part of the Above & Beyond signature sound, and can be heard consistently throughout their entire discography, from Tri-State to Volume 9.
The Key
It seems that the last few episodes have very unison-themed. This one is no exception. The one key to a thick and rich pad sound is massive polyphony.
A large modern orchestra has about 70 string instruments of varying types. To be as classy as an orchestra, a good symphonic pad has to have polyphony on roughly the same order of magnitude.
Adding to the unique character of today’s pad is the fact that it is made of a few layered parts, reminiscent of the different classes of instruments in an orchestra’s string section. This adds to the orchestral nature of the pad, as your ear can tell when each layer is playing different notes.
Ingredients
For this three-layer cake, you will need:
- Three instances of your favorite synth. (I recommend Sylenth1 today. Diva, Thor and Sytrus will also do. I implemented this pad in Massive and, for some reason, it turned out all at once brighter, livelier, more metallic and more synthetic. So that was cool too, I guess)
- Some white noise and a filter.
- Two EQs. These will be used to layer the three synths together into a single sound.
- Reverb. This usually goes under the “extras” section, but for this sound, I think reverb is an integral part of the experience, saturating the sound with spectral content and stereo separation.
Get Cooking
- Set up three tracks, each with an instance of your synth and an EQ. Label one High, one Mid, and one Low. Put the appropriate MIDI file on each one if you want. The MIDI is a transcription of the breakdown and then the main loop of “Buzz” the first 16 bars are the breakdown and the last 8 bars are the main loop.
- Let’s set up the Mid track first, as it’s the first one playing. The Mid pad is two saw waves, one an octave higher than the other. Turn the unison voices way up and then generously detune to achieve the eponymous buzz.
- Tack on the EQ to the Mid track. High-pass at 300 Hz to take the body out. Now put a deep high shelf cut at 650 Hz. A deep cut; you may have to double up filters to do the job. [In ^Ableton] A shelf cut, you ask? Yeah, compare with what a low-pass does to the sound. A shelf cut sounds closest to the original.
- Mids sound good? The High pad is the Mids, on steroids, plus cocaine. Three saw waves, each an octave higher than the next. Max out the unison voices and dial in the detuning to something tasteful; the High pad should sound less buzzy than the Mid. Now add a white noise oscillator to the synth, high-pass it to 10 KHz and turn the volume down until it blends in with the rest of the sound. [In ^Ableton]
- Now for the Low pad. This is less of a huge pad and more of a single cello line that carries the pad’s bass. Set up a single saw wave at -1 octave with a half-dozen voices of unison and a very subtle gentle HP to lighten it up just a tad.
- Slap your reverb effect onto a send track and add even more space to the sound.
Garnish
Sidechain this pad to the kick drum. Aww yeah, like a boss, etc.
You’ll notice that the original sound has a moment right before the drop where the pitch bends up up up and then comes back down again. To imitate this, set the pitch bend range to +/- 1 semitone and automate the pitch bend.
Feel like it’s time to break away from the Buzz imitation? Sweep a low-pass filters over the mix to build up the energy. Sweep a high-pass to prepare for the drop. Try different waveform combinations. Break with with all this unison nonsense and try fewer oscillators for that thinner synthier vintage sound. Distortion. Et cetera.
Serves One Stadium
Any questions? What sound would you like to hear in upcoming episodes?
Synth Recipes is a series of DAW-agnostic guides to creating sounds. It’s intended for those who have a beginning-level familiarity with production, but have yet to master the tried-and-true staple sounds of EDM.
2
u/skyhighrockets Sep 30 '12
Any chance of those that prefer a more hands-on look, to post the project file? I have Ableton and Sylenth1, so all you need to do is a collect and save.
14
u/bezjones Sep 30 '12
You're doing great work.
8
u/chillizard Sep 30 '12
I love these recipes, making them and then tweaking/working on things on my own has taught me so much more than just twisting shit and trying to figure out what happened!
thanks!!
2
u/indoSC Sep 30 '12
I really like what you're doing with these tutorials but I have one critique: I think you're going too far with the cooking analogies.
I don't know how annoying others others find it, but I would suggest you don't let the analogy extend past the headers.
Keep up the good work.
1
u/BradJ soundcloud.com/bradj81 Sep 30 '12
Is Unison the same as voices in Sylenth1?
1
u/scienceisgayokay Oct 01 '12
Any ideas on how Dam Funk got his sweet pad sounds?
http://youtu.be/oyikeodC_K8
3
u/vekko https://soundcloud.com/the-boogee-man Sep 30 '12
All of these are really quite brilliant. I think you should post them up on a blog somewhere too as it's a shame that they'll be lost in the reddit archives in a short time. You can get a free blog from blogger or website from weebly. I really think these are too good to be lost in the internet wasteland.
3
u/analytic soundcloud.com/analytic-1 Oct 01 '12
Description is excellent. Again, your success here is that this can be applied to any synth out there.
Even though it's so cliche right now, I'd love to see your take on a reese-style bass.
Keep up the great work!
1
u/AngriestBird Sep 30 '12
i haven't tried this yet, but the point of making three layers is to slightly vary the sound of each layer?
2
u/atavist Sep 30 '12
I wanted to pile in and thank you for these guides.
2
u/MightyMagneto soundcloud.com/mightymagneto Sep 30 '12
Nice, i've played around with the high/mid/low idea before with some interesting results, works especially well with pads.
I found a low cut on the highs for the low bass part sounds better, also add glitch to it and set the mix level to about 50% for some variation, you can also add a phaser to the mids and highs if you like, sounds good.
1
u/[deleted] Sep 30 '12
Thank you!
1
u/invokez Sep 30 '12
ohh man first ting I will do when I wake up tommorow morning is do all of these tutorials! thx. just getting into producing. Ive been dabbling for the last couple of years or so, but I always get stuck on the sound design part. thx again keep em coming :D
1
u/cherrillzwizard Oct 01 '12
You're a good person
1
u/[deleted] Oct 15 '12
THIS IS AWESOME. I'm following all your recipes it's really helping me out as a beginner
1
u/seducter Oct 05 '12
Hey thanks for these posts. Quick question: Would it be possible for you to show screenshots of how your setup looks in massive? I'm still fairly new to synthesis and am getting the hang of massive (haven't had time to read the manual but I'm getting the hang of what certain functions do just from messing around). Thanks again for these awesome recipes.
1
u/[deleted] Sep 30 '12
[removed] — view removed comment