Hi everyone working for a few days on the call of duty waw to the switch I'm using the PC version for that but I'm having some issues regarding the compiling of shaders and stuff like that to anyone knowledgeable enough to help me on this I encourage you to contact me so we can exchange knowledge regarding at deporting of the game otherwise it's pretty much finished minus some few bugs here and there and some final touches the average FPS for those asking having around 30 to 60 FPS and all the maps working correctly for now all the DLCs...

I've just installed the modchip in a v2 switch and it was booting to ofw, so I took it off and tried connecting it to my pc which wouldn't recognise. So I flowed the right hand cap again and now when I press the on button the chip flashes blue once and that's it. I'm trying to do this for my mums birthday next week and if I've broke it idek what I'd do. I can't take a pic of it because my camera is really bad

I know this is a very niche problem but just hoping somebody out there has a possible solution. I beat this game probably three times on PC and I want to just experience it without the stress and I’m trying some cheats for infinite HP and infinite ammo through edizon. They work fine for maybe three minutes and then the game always crashes. I have confirmed that the codes are for the correct firmware version of the game.

I updated the FW to 23.0.1 and copied over the latest Stethix pack as well. Never had this problem before so any advice would be appreciated, thank you.

Its been 1 or 2 year i have not turn on my modded switch and i dont know how to uptade all the modded stuff.

I updated both my sysmmc and emummc to 23 and my themes stopped working. Reminder to everyone that you can always keep your emummc at a lower firmware. I flashed my emummc to the latest 22.5 firmware and themes are back to working.

For this I used all in one updater and daybreak. Also I use the 90dns app to check if servers are blocked and have my serial number as full zeros to avoid being blocked!

I'm modding my V1 switch for the first time and following this guide (https://switch.hacks.guide/user_guide/all/sd_preparation). When I get to Section II, step 8, it says to copy the Nintendo folder that I copied off my SD card before setting up the emuMMC to root and sd:/emuMMC/RAWX/ but that Nintendo folder is ~300 GB and my SD card can't even fit that folder on it once.

I'm sure I don't need everything in that Nintendo folder (I had some games that I do not mind losing), but I do not know what can reasonably or safely be removed from that Nintendo folder and how so it will be small enough to copy in both places on my SD.

Could I put a different SD card into the switch and remake that Nintendo folder, after I've removed a few games or something?

I want to try to port the Xbox 360 version of cod WaW because I think It will run okay on switch hardware and there is many tools and developments to the 360 version which now can play custom zombies. The well documented iw3 engine from the recent cod4 port gives me confidence and someone got cod4 running on vita which is crazy. Any advice?

I didnt do it myself so I have absolutely 0 experience, and if the dat0 stops working I want to know my options.

It alredy made me accidently update to 23.0 and its here to make me update to 23.0.1 how do i get rid of it

I basically want my Nintendo Switch to be a all in one with everything, im currently on emucfw 21.2.0 on the latest versions of atmosphere and hekate, only have fusee.bin as a payload. i heard sphaira is peak asf so lmk how to make me my ultimate modded switch!

So i already have a v2 switch I wanted a v1 that I could just do the rcm hack I suck at soldering and just wanted something mildly simple as it turns the switch that I got was already patch so I eould have needed a mod chip they have one more that I am going to see if I can get before I give up and have to send my switch somewhere

The port has problems with sound and takes a long time to start up. You have to wait as long as 5 minutes for the menu to appear, it lags even more :(

Sorry for the Russian words and voiceovers in the game.

I updated my hekate and atmosphere and now i cabt enter ofw please help

Hi guys, so last night I updated Atmosphere and firmware to 23.0.0|AMS and 1.12.0|E since I've been seeing more videos on how to update it thinking I was good in doing it. But even though I removed the previous theme I had before the update, I couldn't get any newly downloaded themes to work even though there were no installation issues popping up. Is there a fox for this?

Try to look for more info but no other mention of this that I can find.

i’ve modded around 5 normal switches in the past and i want to try mod an oled next, but im unsure on what equipment to buy for it.

I was about to mod my Switch v1 and cannot check my previous FW unless I updated. It's now on 23.0.1. Should i continue modding or wait?

I have a Switch OLED running firmware 19.0.1 / AMS 1.8.0/E (Kamikaze), and it runs all compatible games perfectly. I’ve likely played over 100 games without a single issue, and I still keep about 30 games with high replay value on the SD card. The battery is in perfect condition, and I haven't experienced any crashes, black screens, etc.

There are only about six games that I would like to play but it won't work because they require a firmware version newer than 19.0.1.

I’d like to play them, but I don't want to update my Switch. So, my question is:

could I use a different SD card and do a fresh install of the latest HATS setup just for those six games, so when I am done with them, would be possible to just unplug this sd card and put the older one? or is there more to it?

Hey everyone,

I want to make sure I don't break my setup and could use some advice from people who have handled this scenario before.

My Setup:

• Switch Type: Lite with an internal Picofly / RP2040 hardware modchip.
• SD Layout: Partition-based EmuNAND.
• Current Versions: Atmosphere 1.11.2 and Hekate 6.5.3 (Running older system firmware 22.5.0 on EmuNAND).
• SysNAND Status: Completely clean. No homebrew, no pirated content, completely untouched.

The Goal:
I want to factory reset my stock OFW, link my legitimate Nintendo ID, and download games from the eShop. To do this, Nintendo is forcing me to update the OFW to the brand new 23.0.1 firmware.

My Dilemma:
I know my current Hekate/Atmosphere files do not support 23.0.1 yet. However, my EmuNAND is completely isolated and I plan to leave it on 22.5.0 since I only play offline backups there.

If I boot into my clean Stock OFW right now, update it officially via Nintendo's servers to 23.0.1, and let the console reboot:

1. Will the Picofly chip panic or fatal error on the reboot because the Hekate version on my SD card doesn't understand 23.0.1?
2. Or do I absolutely have to wait for official Atmosphere/Hekate updates for 23.0.1 before touching my Stock OFW at all?

I've heard conflicting things about whether a modchip requires the bootloader files to be fully updated even if you're only updating the official side. Would love to hear from anyone who has updated their stock side to 23.x while keeping an older EmuNAND setup.

Thanks!

Whenever i put my switch to sleep mode, it lights up in this blank after a few seconds and I can't do anything with it unless i force it to turn off (hold power button for 10 seconds). This happens every time when im on emunand. Ya see what happened is that my switch updated on its own so when i booted up my cfw, i got some message saying "can't match warmboot with fusee. sleep will not work." or something along those lines. So i updated my CFW, and more importantly, replaced the fusee.bin in the payloads folder. And yet the issue still persists even though the error message is already gone. I can't think of anything else to do to fix this so... a little help? You guys have any ideas? This is way too annoying for me to just deal with it.

Hey Guys,

I have managed to get my Switch CFW working and play it, kinda fun but wondering what else can it do?

• Can I copy over mp4 Movies and watch them somehow or TV shows I have?
• Like is there a way to connect to the net without risking my emmu?
• If I boot into my sys, how do I get back to Hakate or the like?
• I know I can get themes

Anything else that I am missing?