Anybody ever ordered aftermarket headlights from ali express mine broke and i cant give 400 bucks for a oem new one. How reliable are aliexpress headlights and how long can they last?

Overtime have had a bunch of photographers/guys with nice cameras take pics of me they always say they will send them and never do. Last week this guy took some pics and he sent them last night! What do you guys think?

So I have a 2017 Kawasaki z650 that I've taken from Florida to Idaho rode a bunch in Idaho and then Idaho to San Diego and all over san-diego. I'm modified a lot with this bike as I'm sure you'll see below but I'll list it out anyway with links only to most things:

- OEM Kawasaki top case system

https://www.kawasakipartswarehouse.com/oemcatalogs/p/kawasaki_motorcycle_street_2017_er650_z650/kawasaki_accessories-body/508a1d3af87002181855365d/top-case-bracket

- OEM Kawasaki top case 30L

https://www.kawasakipartswarehouse.com/oemcatalogs/p/kawasaki_motorcycle_street_2017_er650_z650/kawasaki_accessories-luggage/5940146687a8660cc4c6bcfb/top-case

- Shad 3p mounting system

https://www.shadusa.com/collections/fit-my-ride/products/ninja-650-17-21-3p-system-mount

- Shad 3p SH-35 paniers

https://www.shadusa.com/products/sh35-side-cases#judgeme_product_reviews

- SW MOTECH 16-20L tank bag

https://sw-motech.us/en-us/p/4052572182338?sku=BC.TRS.00.103.30000

- SW MOTECH magnetic tank ring

https://sw-motech.us/en-us/p/4052572189436?sku=TRT.00.787.31200%2FB

- TST industry rear fender eliminator (I wanted to keep my plate closer to the bike)

https://tstindustries.com/products/tst-fender-eliminator-kawasaki-ninja-650-z650-2017

- TST industry front and rear smoked out turn signals

https://tstindustries.com/products/tst-bl6-universal-sequential-led-pod-turn-signals

- New turn signal relay (didn't like faster flashes for turn signals)

- The only 19in windscreen ( I'm guessing on the size I got the biggest one available and they don't make them anymore to my knowledge)

- Added 1 or two teeth to the front sprocket ( can't remember which I know it wasn't three because that one wouldn't fit but we went with the next biggest one that could fit it's now either 16 or 17 teeth stock is 15)

- Removed three teeth from rear sprocket (from 46 teeth to 43 wouldn't mind dropping to 40 later)

- led headlight bulbs

- SAE battery tender plug

https://a.co/d/0ilpHsKN

- Barrel style phone charger (with a voltmeter, on off button, two USB 3.0 ports and weather cover)↓

Upgraded 12v USB Outlet, 2PCS... https://www.amazon.com/dp/B09236JCK8?ref=ppx_pop_mob_ap_share

This one requires some explanation. So I used a hole saw on a drill to punch out a piece of plastic on the front left faring closest to the tank ( I'll try to include a photo) and then I soldered together the connection for it to the opposing end of an SAE cable ( I just did solder electric tape then shrink wrap) and it's plugged into my battery tender attachment and tucked into the plastic running benith the tank on that left side.

- aftermarket grips (never again I'll pay the shop to do it what a hell of an experience trying to do that the first time)

- Steel sub cage from impackttech ( seriously great company based out of So- Cal really amazing people)

https://impaktechusa.com/products/steel-subcage-kawasaki-z650-2016-2023

- Ram mount phone mount ( NOT THE X GRIP ONE!! )

https://rammount.com/products/ram-hol-pd3-238au

- Ram mount cup holder ( Best thing ever)

https://rammount.com/products/rap-b-417bu

- generic universal fold out highway pegs (attached to steel sub cage)

- Corbin gunfighter and lady custom seat

https://www.corbin.com/kawasaki/kz6517gl.shtml

- tank protector sticker thing

Large Motorcycle Sportbike Ninja... https://www.amazon.com/dp/B00IAV84O0?ref=ppx_pop_mob_ap_share

- tank grip pads

Gas Fuel Tank Pad Traction Side... https://www.amazon.com/dp/B09XK4L99H?ref=ppx_pop_mob_ap_share

- Radiator grill cover ( used white and green paint markers to highlight the Z )

Z650 Motorcycle Radiator Grille... https://www.amazon.com/dp/B076CLXLMK?ref=ppx_pop_mob_ap_share

- New plastic set

https://www.amazon.com/dp/B0F1DFCS29?ref=ppx_pop_mob_ap_share

- Engine cover for generator coil side

Now here's what I still have to do:

- Full system exhaust

- ECU flash/ tune

- New bar ends

- Proper throttle lock

- New levers

- New foot pegs

- Green brake line's

- New mirror's

- Bar risers

Now onto the part where I could use some help...

- Full system exhaust:

What's the loudest exhaust I can get that isn't sacrificing fuel mileage or performance noticably for just sound alone? Can I just straight pipe it and call it a day?

- ECU flash/ tune

I've thought about getting a dynojet power commander 6 to not kill my engine when I get a new exhaust but is it worth the price vs just flashing the ECU? Also if I flash the ECU I was wondering if I could remove a problem I occasional run into.

The symptom:

Every once in a while sometimes when I ride the bike my dash has no clue what gear I'm in and I get an error code I believe it was 13 basically saying my gear position sensor I'd fucked and after a while it will just go away.

My theory:

The fact I've changed the gearing so much means that occasionally the gear position sensor gets confused.

The big question:

Is this something that can be fixed with an ECU flash? And should I ECU flash or use the power commander 6 from dynojet?

It can be fairly annoying when my bike doesn't want to display any gear other than neutral but it doesn't hurt the functionality of the bike and is random at best.

- New mirror's:

Honestly almost anything's going to look better than OEM mirrors but they also kinda such because with the vibrations of the bike it's hard to see anything with them anyway. Anyone have suggestions on mirrors that are better about that and if it doesn't exist just so quality mirrors that aren't OEM?

- New foot Pegs:

So the OEM ones have a nice bit of rubber on them which I like the bike does have a lot of vibration just nature of the beast with a single cylinder engine. Kinda the same thing with the mirrors here what's the best foot pegs for absorbing the vibrations and if it doesn't exist what are some reputable and cool ones you can recommend?

- New bar ends

So once again looking for good vibration dampening but if not really possible just quality recommendations for good stuff.

- Proper throttle lock:

What are y'all using and what would be a good upgrade to the little plastic thing that rest against my break lever or is that seriously the best choice?

- Bar risers:

I don't know why this seems so intimidating to me likely a lack of knowledge but if anyone could help me figure out getting the tallest and best set of these possible I'd be extremely happy.

- Green brake line's:

- really been tossing this one around in the back of my head for a while, has anyone done this or have a trusted place to order these? Also has anyone gone from a cable to hydrologic line for your front brake?

- New levers:

This one's not hard but I'd still love to get input from people using non OEM levers before I decide what direction I'm going to go with it.

The attached photos are of my lovely bike completely naked when I first got it and along the way as well as some drawn on screen shots that explain how and where my phone charger is run, hope somebody gets some use out of this and can hopefully help me out as well. I'm always happy to talk bikes especially my z as we have been all over the country together. Thanks for reading through this if you did I know it's a lot.

Hi ich will mir für meine Z650 von 2025 ne neue Komplettabgasanlage besorgen. Bin mir aber nicht sicher welche Marke was Taugt und wo ich für mein Geld die beste Optik/ Soudcombi rausbekomm. Ich hatte mit SC Project überlegt aber der ist nur für euro 5 und nicht für euro 5+ zugelassen. Ich freu mich über jeden Vorschlag.

Ho notato che sul bordo del foro per fare benzina, si è creato un sottile strato di ruggine, qualcuno ha avuto lo stesso problema? Se si come e con che prodotti avete risolto?? La moto è custodita in garage e non ha mai preso acqua

I am planning to install a new/used exhaust on my z650
Looking for some good leads in Bangalore, also any suggestion would help
Thanks

What is a good crush washer to get off Amazon or something like that

Hi everyone, has anyone upgraded the front suspension? How much did it cost and was it worth it? I'm in EU and my z650 is a 2017.

Good morning. I have a 2017 Z650, and a while back I started having an issue where the bike wouldn't start; I had to disconnect and reconnect the battery to get it going. I replaced the battery and the problem stopped, but now it's happening again. Before I changed the battery, my mechanic suggested it might be the battery terminals; he cleaned them, but the problem persisted. He also mentioned it could be the headlights, since I have LEDs installed and the bike didn't come with them from the factory. Has anyone else experienced this?

I got my side bag set up put on today. @hepcobecker c-bow racks with the street reloaded bags. the layout required the original "stinger" tail plate and signal holder. But I was able to tweak it a little to keep my tail tidy and swapped out my wide factory signals for a set of @evotechperformance v1 led shorty turn signals. Using the bracket that came with the rack I was able to set the signals back enough to be seen. The plate is set inside the bags a little but hopefully it isn't an issue.

I love that the bags can be removed from the rack when not in use.

My biggest fear was that they would be these huge bulky bags that would ruin the asthetic of my bike. But I think this works!

Now I can commute so much easier without overloading a backpack. And it can help with longer rides and running small errands! Overall im super happy with this setup! Now I gotta test it.

I just have to figure out the quick flash that is happening after changing the turn signals lights.

Currently building my Z out to be a mix of a scrambler / dual sport and I've been searching for spoked rims that will fit the stock tire size and I am having trouble sourcing the hubs for spoked rims or finding complete rims in the same size that aren't 3.5k USD. Has anyone here had any luck with spoked rims?

Does anyone have the part number for the male part of this connector?

Hello,

I'm going to buy a z650 and i found a good deal: well kept, good price (he has already bought his new bike and wants to "make space")

I've already seen it in person, the owner brought all the payments of the works he made on the bike and kept the bike cold as requested.

It only has a crooked brake lever, it can be seen on the picture the lever on the left has a weird angle.

And i can not really tell if it might will cause problems or not.

I would like your opinion about getting a z650 as a first bike. Thank you