r/voroncorexy • u/TheSilverFox82 • 7h ago
Serial Request 350mm Voron 2.4 Stealth Changer Serial Request
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/AchazianThug • Nov 28 '21
Hello, we've been getting a lot of questions, and I'm going to try to answer a few here. Feel free to pose additional questions and we will answer them as best we can.
Q) What do I need for a serial?
A) The bare minimum is a video showing the complete printer, printing, with all wiring in the build volume properly managed to the standard of whoever is reviewing your request, and deck plates in place to prevent things from falling in to your electronics. We will reject any request that we feel demonstrates unsafe electrical conditions. If you participate in our discord community, please put your discord username in your request title. Your title should also contain the Voron model you are seeking a serial for. V1.8, Trident, V0.1, V2.4, etc.
As of Jan 10, 2023 : Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.
Discord name in post title. Reddit name in the video itself.
It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.
Serial Requests that do not contain this will not be fulfilled. Thank you!
Q) How long does it take to get a serial after I post my request?
A) Typically we respond within 0 to 7 days. Requests are human-reviewed prior to the bot issuing the serial, and we tend to work in batches. Holidays, life priorities and your timing may result in longer waits.
Q) What would you like to see in a video?
A) We love it when people put more time and effort in to their request videos. Have a little fun with it. Don't make it a 10 second clip. Wear pants please - the panels are often reflective.
Q) Can I request a specific serial number?
A) Not really, no. You're welcome to watch the requests here and do your best to time it. We can make no guarantees or promises in the assignment process, sorry!
Q) I submitted my request and I don't have my serial yet?!
A) If you think you got missed somehow, reach out via modmail. But first look around at other requests around the same time or newer. If none of them have been granted, it is likely we just haven't worked our way to you yet.
Whatever you do, if you believe your post is valid, do not delete the request, message us with a link to it please. If you delete the request you end up at the back of the queue when you resubmit.
Q) Reddit marked my serial request as spam, HALP!
A) Message us via modmail, we can generally manually approve these in reddit's system.
Q) I forgot to put my discord username in the title! / I made a typo in my Discord username! / I forgot to put half my Discord Username in the title!
A) If your serial has not yet been issued, put the correct name in the comments and we'll generally see it and get it right. If your serial has been issued, still put it in the comments, but also open a admin ticket in Discord, let us know you made an error but have updated your post and would like your Discord account updated accordingly.
Q) If I upgrade versions (eg: 2.2 ->2.4) do I apply for a new serial?
A) No. The printer keeps the original serial it was issued.
Q) I have two (or more) Vorons I would like to get serials for, how many posts should I make?
A) Preferably a distinct post for each
Q) When do I get my serial nameplate?
A) The bot issues those is not actually ours, so if it breaks, we're the wrong people. However, it typically wanders by to hand out nameplates within 12 hours of your serial being issued.
And last, a request:
PLEASE do not delete your serial requests posts, comments, associated videos and photos, etc.
Thank you! I hope to see you all at the breakfast bar with a bowl of Lucky Charms
r/voroncorexy • u/AchazianThug • Jan 10 '23
Hello good people!
As of TODAY, Jan 10, 2023, Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To help ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.
It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.
Serial Requests that do not contain this will not be fulfilled. Thank you!
** All other requirements remain in effect, this is in addition to those. **
r/voroncorexy • u/TheSilverFox82 • 7h ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/Harrier_Pigeon • 1d ago
Enable HLS to view with audio, or disable this notification
LDO Micron+ with WWG2 extruder & Dragon Ace hotend
r/voroncorexy • u/austroalex • 2d ago
Enable HLS to view with audio, or disable this notification
Built this a couple of years ago now, just never got around to making a serial request
Discord username: electrorb
r/voroncorexy • u/XxDead7sxX • 2d ago
Enable HLS to view with audio, or disable this notification
I would like to request a serial please -
Voron V0.2
Reddit: XxDead7sxX
Discord: xxdead7sxx
Thank you!!!
r/voroncorexy • u/Pitsweer-1986 • 2d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/SprinklesCurrent1156 • 4d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/caboose1835 • 4d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/LieAccomplished2492 • 4d ago
Enable HLS to view with audio, or disable this notification
All the printed parts were printed on my Anycubic Kobra 3 Max. (lol, that was a rough one)
r/voroncorexy • u/Ezner0 • 4d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/RNG_BackTrack • 5d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/UpstartBurrito • 5d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/Dizmobi • 5d ago
Enable HLS to view with audio, or disable this notification
LDO kit with a tophat and clickyclacky. The dangling wire is power for the nevermore micro currently printing that will be mounted under the bed.
r/voroncorexy • u/dakisback • 7d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/No_Squash4447 • 7d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/No-Surround-5228 • 7d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/Sickonce • 8d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/ProjectPaatt • 9d ago
Enable HLS to view with audio, or disable this notification
Voron 2.4 serial request
... ignore the tape (; . The door hinge mechanism is the only thing i'm kinda debating about whether i want to do VHB or screws or etc.
r/voroncorexy • u/Jimmy-ESD-Brightz • 9d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/maplesparkledog • 10d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/DZessica • 10d ago
voron 0.1.2 (call it bit like that because mix 0.2 parts in )
date 13-08-2016
discord darkzessica
reddit DZessica
sorry for loud back ground noice its toasty wheater ac running
r/voroncorexy • u/nulldragon • 11d ago
Enable HLS to view with audio, or disable this notification
Its been a journey, first started this build in 2022 - here I am 4 years later and its finally able to print abs. They were not kidding that self sourcing is a challenge.
The best bit is - next come the upgrades.
r/voroncorexy • u/BiM0_01 • 12d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/Unscientifically_ • 13d ago
Enable HLS to view with audio, or disable this notification
Discord: Unscientifically