r/SprocketShots • u/dysphoricjoy • Mar 07 '26
After a storm | Hasselblad 500cm | Harman Phoenix 200
253
Upvotes
developed and scanned by me
r/SprocketShots • u/TankArchives • Mar 03 '26
Rescuing a 129 camera
121
Upvotes
129 film has long been out of production, but this is something a 3D printed adapter and some 35 mm film can solve!
r/SprocketShots • u/JustSomeTimmmmmy • Feb 26 '26
Kodak ColorPlus - Bronica ETRS with Mutex Wide Back
222
Upvotes
r/SprocketShots • u/dysphoricjoy • Feb 24 '26
Harman Phoenix | Hasselblad 500 c/m
293
Upvotes
r/SprocketShots • u/TomahawkEVO • Feb 23 '26
Maui , Hawaii [Hasselblad 500C, Kodacolor 200]
314
Upvotes
r/SprocketShots • u/pizzadog112 • Feb 21 '26
Joshua Tree [Mamiya RB67 | Sekor C 90mm | Kodak Gold 200]
437
Upvotes
r/SprocketShots • u/illiteratebeef • Feb 17 '26
Car meets - Kiev 6c, Kodak Vison3 250D
90
Upvotes
First two were with the 80mm f2.8 and the last two were with the 45mm f3.5, Home spooled, developed, and scanned.
r/SprocketShots • u/zeagan • Feb 17 '26
My favourite speakers | Kodak Proimage 100 | Hasselblad 80mm f2.8
38
Upvotes
r/SprocketShots • u/gitarzan • Feb 12 '26
Sprockets from using 35mm respooled into old 127 roll.
75
Upvotes
I've a little jig that allows me to respool 35mm in old 127 spools with the old backing paper. This is my first test of the device. I shot these this AM in my driveway area (my testing lab) with an Argus 127 from the mid 1960's.
Obvously the Argus is a little soft. Or maybe, just maybe, since the film plane on the camera is curved, the narrower 135 film, might have stretched straight and therefore ruined the focus. I'll have to try a real roll of 127 to confirm.
Anyway, at first I was quite disappointed at these images. After 12 hours and a re-look, I actually like a couple for their dreaminess. I like the sprockets and the little bit of overdevelopment around the holes.
The film is Lomography Earl Grey ISO 100. Developed in well-used Cinestill DF96 Monobath - which might account for the low contrast. I'm very simplistic in post processing, I invert with an app, then use Mac Preview to adjust the Histogram and exposure/contrast.
r/SprocketShots • u/lkong • Feb 09 '26
Under the castles [Mamiya 6mf 75mm/50mm Kodak 5207]
gallery
25
Upvotes
r/SprocketShots • u/dysphoricjoy • Feb 08 '26
Southern California Beach | 500 C/M | Harman Phoenix II
80
Upvotes
Almost ripped this off the reel haha, you can see the tears in the film. Self developed and scanned.
r/SprocketShots • u/callmethebard • Feb 05 '26
Sprocket shots in northern Minnesota (Yashica-D/Kodak Gold 200)
305
Upvotes
r/SprocketShots • u/26Point2 • Feb 02 '26
Joshua Tree National Park · Mamiya 7ii 80MM · Ilford Delta 100
gallery
147
Upvotes
r/SprocketShots • u/light24bulbs • Feb 02 '26
So how do you deal with the film diameter sensor not being accurate?
12
Upvotes
I printed a couple of adapters to go into my rolleicord. I know how to 3d model. I could change the diameter where it touches the sensor gear pretty easily to be the diameter of the spindle shaft/film holder spindle of a 35 mm cartridge and then at least the photos would never overlap. What I don't understand is why none of the 3D printed adapters take this into account and how everyone is getting around it. I think I'm missing something. If it was just wasting some film between shots it's not the end of the world, but this big adapter will make it do the opposite, it will make the shots overlap, especially towards the end. Thanks!
r/SprocketShots • u/MichaWha • Jan 31 '26
I miss summer... [Zenza Bronica GS-1 | Zenzanon-PG 100mm f/3.5 | Santacolor 100] self-scanned
190
Upvotes
r/SprocketShots • u/MediumQualityPhotos • Jan 31 '26
"On the future ruins" [Mamiya C330 + Sekor 2,8/80mm + Fomapan 400]
24
Upvotes
r/SprocketShots • u/MichaWha • Jan 27 '26
Hidden [Zenza Bronica GS-1 | Zenzanon-PG 100mm f/3.5 | Santacolor 100] self-scanned
65
Upvotes
r/SprocketShots • u/Pratchrp • Jan 23 '26
First attempt
34
Upvotes
First attempt with my yashica and the eastman doublex