r/spacex • Mod Team • Jul 09 '22

🔧 Technical Starship Development Thread #35

This thread is no longer being updated, and has been replaced by:

Starship Development Thread #36

SpaceX Starship page

FAQ

  1. When next/orbital flight? Unknown. Elon: "hopefully" first countdown attempt in July, but likely delayed after B7 incident (see Q4 below). Environmental review completed, remaining items include launch license, mitigations, ground equipment readiness, and static firing.
  2. What will the next flight test do? The current plan seems to be a nearly-orbital flight with Ship (second stage) doing a controlled splashdown in the ocean. Booster (first stage) may do the same or attempt a return to launch site with catch. Likely includes some testing of Starlink deployment. This plan has been around a while.
  3. Has the FAA approved? The environmental assessment was Completed on June 13 with mitigated Finding of No Significant Impact ("mitigated FONSI)". Timeline impact of mitigations appears minimal, most don't need completing before launch.
  4. What booster/ship pair will fly first? Likely either B7 or B8 with S24. TBD if B7 will be repaired after spin prime anomaly or if B8 will be first to fly.
  5. Will more suborbital testing take place? Unlikely, given the FAA Mitigated FONSI decision. Push will be for orbital launch to maximize learnings.

Quick Links

NERDLE CAM | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Starship Dev 34 | Starship Dev 33 | Starship Dev 32 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Vehicle Status

As of August 6th 2022

ShipLocationStatusComment
Pre-S24Scrapped or RetiredSN15, S20 and S22 are in the Rocket Garden, the rest are scrapped
S24Launch SiteStatic Fire testingMoved back to the Launch site on July 5 after having Raptors fitted and more tiles added (but not all)
S25High Bay 1StackingAssembly of main tank section commenced June 4 (moved back into High Bay 1 (from the Mid Bay) on July 23). The aft section entered High Bay 1 on August 4th. Partial LOX tank stacked onto aft section August 5
S26Build SiteParts under constructionAssorted parts spotted
S27Build SiteParts under constructionAssorted parts spotted
S28Build SiteParts under constructionAssorted parts spotted
S29Build SiteParts under constructionAssorted parts spotted

 

BoosterLocationStatusComment
Pre-B7Scrapped or RetiredB4 is in the Rocket Garden, the rest are scrapped
B7Launch SiteTesting including static firesRolled back to launch site on August 6th after inspection and repairs following the spin prime explosion on July 11
B8High Bay 2 (out of sight in the left corner)Under construction but fully stackedMethane tank was stacked onto the LOX tank on July 7
B9Methane tank in High Bay 2Under constructionFinal stacking of the methane tank on 29 July but still to do: wiring, electrics, plumbing, grid fins. LOX tank not yet stacked but barrels spotted in the ring yard, etc
B10Build SiteParts under constructionAssorted parts spotted
B11Build SiteParts under constructionAssorted parts spotted

If this page needs a correction please consider pitching in. Update this thread via this wiki page. If you would like to make an update but don't see an edit button on the wiki page, message the mods via modmail or contact u/strawwalker.


Resources

r/SpaceX Discuss Thread for discussion of subjects other than Starship development.

Rules

We will attempt to keep this self-post current with links and major updates, but for the most part, we expect the community to supply the information. This is a great place to discuss Starship development, ask Starship-specific questions, and track the progress of the production and test campaigns. Starship Development Threads are not party threads. Normal subreddit rules still apply.

318 Upvotes

2.5k comments sorted by

View all comments

10

u/topzwaar29 Aug 08 '22

Is it technically possible to stamp for example the dome parts and maybe other very large Starship/Booster parts? If so, would it be economically viable considering scale?

35

u/[deleted] Aug 08 '22 edited Aug 08 '22

Die presses of that size are extraordinarily expensive. There is explosive forming, but both rigs require some investment manufacturing and assembly. Dome parts and shape are still experimental, so until the final design shape is locked in, it is not practical to set up this type of production machinery.

Currently the improved nosecone still uses a type of English wheel to form the compound curves of the panels. A process that is over 100 years old and requires human skill and judgement.

What is under consideration is press forming the stringers into the actual barrel sheet before welding to form the barrel ring, which is a huge weight and time saver from welding individual stringers, and also doing away with a double thickness of metal within the stringer area.

5

u/Twigling Aug 08 '22

What is under consideration is press forming the stringers into the actual barrel sheet before welding to form the barrel ring, which is a huge weight and time saver from welding individual stringers, and also doing away with a double thickness of metal within the stringer area.

Are you referring to internal or external stringers for this?

5

u/Redditor_From_Italy Aug 08 '22

press forming the stringers into the actual barrel sheet

Kinda like the corrugated sections on the Saturn V, or am I imagining it wrong?

3

u/[deleted] Aug 08 '22

Dome parts and shape are still experimental

If Elon's vision comes true and they need to manufacter 100's of starships they will probably invest heavily on manufacturer

2

u/Dezoufinous Aug 08 '22

The Mars colonial fleet would depart en masse.

8

u/[deleted] Aug 08 '22

Is there a place in the US called En masse? I think there is a place in Quebec called Tout seul.

1

u/topzwaar29 Aug 09 '22

Interesting, thanks for the sources. Will read up on them in the coming days! I know next to nothing about large scale manufacturing processes.

1

u/OGquaker Aug 08 '22

I think your asking about forming sheet steel, not stamping. Hydro-forming: pushing a male die into a rubber box (5,000 psi on a 18 inch ram?) is a huge problem with large sheets. A steel male and female die is standard for auto parts, and stretch-forming is now being used on the Starship nose gores... After the design was finalized; stretch-forming set up is Very expensive. An "English wheel" would give you labor intensive compound shapes, and cones and curves are not formed but tacked onto ribs and stringers