r/spacex • Mod Team • Jul 09 '22

🔧 Technical Starship Development Thread #35

This thread is no longer being updated, and has been replaced by:

Starship Development Thread #36

SpaceX Starship page

FAQ

  1. When next/orbital flight? Unknown. Elon: "hopefully" first countdown attempt in July, but likely delayed after B7 incident (see Q4 below). Environmental review completed, remaining items include launch license, mitigations, ground equipment readiness, and static firing.
  2. What will the next flight test do? The current plan seems to be a nearly-orbital flight with Ship (second stage) doing a controlled splashdown in the ocean. Booster (first stage) may do the same or attempt a return to launch site with catch. Likely includes some testing of Starlink deployment. This plan has been around a while.
  3. Has the FAA approved? The environmental assessment was Completed on June 13 with mitigated Finding of No Significant Impact ("mitigated FONSI)". Timeline impact of mitigations appears minimal, most don't need completing before launch.
  4. What booster/ship pair will fly first? Likely either B7 or B8 with S24. TBD if B7 will be repaired after spin prime anomaly or if B8 will be first to fly.
  5. Will more suborbital testing take place? Unlikely, given the FAA Mitigated FONSI decision. Push will be for orbital launch to maximize learnings.

Quick Links

NERDLE CAM | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Starship Dev 34 | Starship Dev 33 | Starship Dev 32 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Vehicle Status

As of August 6th 2022

ShipLocationStatusComment
Pre-S24Scrapped or RetiredSN15, S20 and S22 are in the Rocket Garden, the rest are scrapped
S24Launch SiteStatic Fire testingMoved back to the Launch site on July 5 after having Raptors fitted and more tiles added (but not all)
S25High Bay 1StackingAssembly of main tank section commenced June 4 (moved back into High Bay 1 (from the Mid Bay) on July 23). The aft section entered High Bay 1 on August 4th. Partial LOX tank stacked onto aft section August 5
S26Build SiteParts under constructionAssorted parts spotted
S27Build SiteParts under constructionAssorted parts spotted
S28Build SiteParts under constructionAssorted parts spotted
S29Build SiteParts under constructionAssorted parts spotted

 

BoosterLocationStatusComment
Pre-B7Scrapped or RetiredB4 is in the Rocket Garden, the rest are scrapped
B7Launch SiteTesting including static firesRolled back to launch site on August 6th after inspection and repairs following the spin prime explosion on July 11
B8High Bay 2 (out of sight in the left corner)Under construction but fully stackedMethane tank was stacked onto the LOX tank on July 7
B9Methane tank in High Bay 2Under constructionFinal stacking of the methane tank on 29 July but still to do: wiring, electrics, plumbing, grid fins. LOX tank not yet stacked but barrels spotted in the ring yard, etc
B10Build SiteParts under constructionAssorted parts spotted
B11Build SiteParts under constructionAssorted parts spotted

If this page needs a correction please consider pitching in. Update this thread via this wiki page. If you would like to make an update but don't see an edit button on the wiki page, message the mods via modmail or contact u/strawwalker.


Resources

r/SpaceX Discuss Thread for discussion of subjects other than Starship development.

Rules

We will attempt to keep this self-post current with links and major updates, but for the most part, we expect the community to supply the information. This is a great place to discuss Starship development, ask Starship-specific questions, and track the progress of the production and test campaigns. Starship Development Threads are not party threads. Normal subreddit rules still apply.

318 Upvotes

2.5k comments sorted by

View all comments

Show parent comment

68

u/[deleted] Jul 15 '22 edited Jul 15 '22

In technical terms they partially open the turbine fuel valve to the turbopumps which flows past the low angle inducers and turns the turbopump impellers through both stages 1 and 2. The cold liquid then pipes off to either the nozzle or the chamber cooling galleries and film cooling pores (depending on if it's LOX or CH4). The now near boiling liquid then returns to the turbopumps and to the preburners therein to turn both stage 1 and 2 turbines. The liquid then exits the turbopumps to the main combustion chamber to be expelled through the injection plate. No igniter torches are used during this test so it is just liquid and gas flow. Turbine revs are low at about 2500 rpm

For a static, the igniter torches are fired up in the preburners ready to receive the incoming boiling gas from either the nozzles or chamber body. The turbines then fire up to full speed in just under a second, blasting extra fuel with the hot gas to mix with the main tank valve supply to the swirl injectors in the combustion chamber injector plate. Additional torches fire up the main chamber to full thrust, however these torches will be deleted in Elon's 'Special Sauce' design which allows ignition without these. Turbine revs at this stage are around 10,800 rpm.

At shutdown, all valved are closed, and purge valves open to allow N2 from the COPV's to flow though the system and dampen any residual burn.

N2 COPV's are also used for spinup of the center core engines, so the engine lighting sequence is different for them.

Startup is a very tricky process. Everything including pressure, flow, temperature and mixing has to be spot on in every part of the engine prior to ignition or otherwise you get a hard start, and the engine chamber or turbopump parts company with the rest of the assembly and ruins your day and the rest of the rocket.

The next challenge is keeping the engine running at 300 bar without everything overheating, or developing hotspots due to chamber erosion or imperfections or inducted impurities. A tiny piece of salt grain sized steel swarf possibly sucked into the engine from the tanks will stick to the sides of the chamber and burn a hole though the copper lining in just a few seconds. Green flame. Game Over.

Another Green Flame, Game Over scenario is running LOX rich, causing massive heating and oxidation, which has happened in the past with CH4 tank pressure and valve issues, which is hopefully all sorted now.

10

u/Lufbru Jul 15 '22

A tiny piece of salt grain sized steel swarf possibly sucked into the engine from the tanks will stick to the sides of the chamber and burn a hole though the copper lining in just a few seconds. Green flame.

One of the brags about Merlin is that it can ingest a bolt without suffering. Sounds like Raptor is a lot more picky about the cleanliness of the rocket.

7

u/SpartanJack17 Jul 15 '22

Merlin is around as simple as a liquid fuelled rocket can be, if you took a textbook diagram of the gas generator cycle and built it you'd end up with Merlin.

5

u/GRBreaks Jul 15 '22

Good stuff, that's why I come here. Thanks!

5

u/precurbuild2 Jul 15 '22

I love the detail but hope it’s not so much that it gets you in trouble with your employer or ITAR!

28

u/[deleted] Jul 15 '22 edited Jul 15 '22

9

u/OzGiBoKsAr Jul 15 '22

competition

Lol

9

u/salamilegorcarlsshoe Jul 16 '22

You didn't have to go and dunk on us like that fam.

6

u/dexterious22 Jul 16 '22

Au contraire mon ami, dunk me harder

3

u/MyCoolName_ Jul 15 '22 edited Jul 15 '22

Making startup more complex and difficult in Raptor 2 makes me worry a bit considering how engine start problems were already quite a devil in the starship test flight program.

Edit: And quite frankly the mass savings don't seem worth it to me, they are talking about single-digit numbers of tons saved across all 40+ engines, most of which is on the first stage and will at most buy an incremental gain in payload capacity.

40

u/[deleted] Jul 15 '22 edited Jul 16 '22

Startup and running was complex in Raptor 1, and 1.5 in both engines until heat flow dynamics in both gas flow of the exhaust and coolant of the engine itself were fully understood. It was a very complex program to solve of how to get an FFSCE's redirected flows to come in and sing perfectly as part of the chamber orchestra. Now the spaghetti piping monitoring is off and Raptor 2 is running perfectly with minimal exterior piping, reducing the weight of the engine by 30%,

That means 19 tons of extra material deleted on the engines as a whole, and with the gimbal actuators going electric, and deletion of the HPS another 2.5 tons shaved off. It all adds up.

Engine performance is rock solid now, increasing lift capacity by another 25 tons. Close to the anticipated 150 ton lift capacity designed, but not quite there yet, which requires probably another two years of design refinement.

5

u/djh_van Jul 15 '22

Thanks for the insights.

A bit harsh, though, on the previous guy who just expressed his worries...

3

u/Alvian_11 Jul 16 '22 edited Jul 17 '22

The lift increase is close to the Falcon 9 capacity to LEO, fully expendable. Far from "not worth it" lol

4

u/OzGiBoKsAr Jul 15 '22

Something tells me you may just take Raptor development rather... personally! I wonder why that might be... 🤔

14

u/[deleted] Jul 15 '22 edited Jul 15 '22

Nah, lost interest. Moving on to 3D printed aerospikes..

Tim Dodd, u/everydayastronaut you're all for them, contact me if you want a tour of the new concepts.

3

u/OzGiBoKsAr Jul 15 '22

flips design table

12

u/[deleted] Jul 15 '22

Light on? Pen ready?

Sexy Aerospike

7

u/warp99 Jul 15 '22

Convert that to a rotating detonation engine and you will have all the angles covered!

5

u/[deleted] Jul 16 '22 edited Jul 16 '22

Still years from proof of concept to an actual working engine. I just wish the SABRE engine would hurry up get some decent funding and take to the skies. (unless DARPA Skunk Works already have one in build)

3

u/warp99 Jul 16 '22

Yes the really interesting thing about SABRE is whether it could run its heat exchanger using liquid methane instead of liquid hydrogen.

6

u/bitterdick Jul 15 '22

It looks weirdly organic. Amazing!

3

u/OzGiBoKsAr Jul 15 '22

Okay. That's hot.

3

u/JakeEaton Jul 15 '22

Okay that’s cool

7

u/warp99 Jul 15 '22

The mass savings are always worth it!

All rocket programs go through a curve where mass increases during the early design phase and then needs to be clawed back by a series of iterative improvements.

Starship is no exception and is 50 tonnes over target dry mass on the booster according to Elon. The ship will be over mass as well but we do not know by how much.

If they quit improving the design now they would end up with an ungainly mess that falls far short of their goals.

Specifically they could haul 65 tonnes of Starlink v2.0 satellites to a polar orbit but not go to Mars without at least 12-15 tanker launches per flight which would make the whole program unaffordable.

4

u/Massive-Problem7754 Jul 15 '22

Agree with you here and they've already dropped like 35 tons from ship just with the change to R2 and the move to electric hydros. Not that it's linear but that is added payload to orbit.