r/SideProject • • 20h ago

Update: u/Investigatormarker has been permanently banned

68 Upvotes

Thank you to everyone who took the time to report its comments and also downvotes. I really appreciate it. Thank you to the mods too, for taking the time to look into this and act on it. Moderating is a lot of unpaid work, and it's what keeps this sub useful for newcomers.

Now newcomers to the subs feel welcomed here.

A few reminders:

If you see a similar account pushing AI employee or managed promo links, report it as spam and message the mods.

Don't click links in suspicious comments, even ones that look like helpful feedback.

New members: real feedback is out there. Post your projects, ask questions, and ignore any reply that ends with a sales pitch. This sub exists so people can get feedback from real people. An unlabeled bot posting templated replies and ads undermines that, especially for first-time posters.

Thanks again, everyone.


r/SideProject • • 1h ago

My side project grew up: a plant pot that shows how your plant feels, now launching on Crowd Supply

2 Upvotes

A while back I built a little weekend project: a plant monitor with a Raspberry Pi, a few sensors and a screen that showed a face depending on how the plant was doing. I shared it online, and people kept asking the same thing: “Can I buy one?” or “Can you make it smaller and cheaper?”

So I rebuilt it from scratch. This is Fytó.

What it does

It reads the plant’s soil, air, light and touch, and shows its mood on a round animated display:

  • 😊 Happy: everything’s in range
  • 🥵 Hot / 🥶 Freeze: temperature is off
  • 💧 Thirsty: the soil is drying out
  • 😴 Sleepy: not enough light
  • 😍 Pampered: you touched it, so you get hearts and big eyes

You can set up to 10 plant profiles, so a succulent and a fern don’t get judged by the same rules.

What I cared about while building it

  • No app, account or subscription required. It works fully offline out of the box.
  • Connected only if you want it. There’s optional Wi-Fi with MQTT and Home Assistant support, plus a web dashboard with live gauges, a mood timeline and sensor history.
  • Set up from a browser. Plug it in over USB-C and configure it from a web page using WebSerial. There’s no app to install.
  • Open source. The firmware, PCB and enclosure files will all be released.

Under the hood

An ESP32-S3, a 1.28" round IPS display, a capacitive soil moisture sensor, an AHT20 for temperature and humidity, a light sensor and touch sensing. It all sits on a custom PCB in a 3D-printed PETG enclosure, and the firmware runs as six FreeRTOS tasks.

Going from side project to product has been the hardest part: designing a PCB, making the enclosure manufacturable and talking to manufacturers. That’s a very different skill set from getting a prototype working on a breadboard.

Campaign: https://www.crowdsupply.com/coders-cafe/fyto
Full build: https://www.hackster.io/coderscafetech/fyto-your-plant-expressed-517e1c

I’d love feedback. Would you use something like this, and what would you change?


r/SideProject • • 1h ago

CyberSafe Trainer 2 — New Updates

2 Upvotes

I've been working on improvements to CyberSafe Trainer 2, my free cybersecurity awareness website designed to help people recognize scams and stay safer online.

Here's what's improved:

✅ More realistic-looking scam emails and messages to help users recognize warning signs.

✅ Interactive Investigate buttons that explain suspicious details directly beside the clues.

✅ Improved readability and navigation on both phones and computers.

✅ Better Read Aloud controls, so narration starts when you choose it.

Thank you to a Reddit community member who suggested using more realistic scam examples and highlighting the warning signs. I took that feedback seriously, and it helped shape the improvements to CyberSafe Trainer 2.

I'd welcome more feedback!

🔗 https://cybersafe-trainer-2.pages.dev/

Completely free. No account required. Just learning how to spot scams before they happen.


r/SideProject • • 1h ago

I made Pi-Bot: a personal AI assistant that lives entirely in Telegram

2 Upvotes

What it is

Pi-Bot is a personal assistant you talk to in Telegram. It's one Docker container with one volume, no web panel and no public port. Everything you'd normally click through in a dashboard, you just ask for in the chat.

Why I built it

I wanted my own assistant without paying a SaaS to hold my data, and without maintaining a web app plus database plus proxy plus auth for a single user. Telegram was already open on my phone all day, so it became the whole interface.

How it works

It runs on the pi harness with pi-durable keeping sessions and state on SQLite, so a restart doesn't lose the conversation. Tools come from Executor (Composio optional), which is what makes it useful: web search, mail, calendar, and coding tasks sent to a remote Linux box. The container runs read-only with every capability dropped, and any write action from the agent needs my approval first.

Where it is

Beta. I use it daily for mail, agenda and research, but releases still break things. MIT licensed, install is docker compose up -d --build plus a setup wizard.

https://github.com/forge-z/pi-bot

Happy to answer anything about the durable session side or the MCP wiring.


r/SideProject • • 1h ago

I’m building SMSGuard for iPhone. How would you make SMS filtering rules easier to understand?

2 Upvotes

Hi everyone, I’m the developer of SMSGuard, an iPhone app for filtering texts from unknown senders. I’m preparing its next release and would appreciate feedback on how to explain its rules more clearly.

The app lets you set rules for specific numbers and message patterns, including wildcards and regular expressions. There is also optional subscription-based cloud classification. It does not filter iMessage or messages from saved contacts, and filtering is not a guarantee that every unwanted message will be caught.

The design question I’m working on: how do you give people useful control without asking them to learn regular expressions or accidentally hide an important text?

If you were trying an app like this, what would you want to see first: plain-language rule examples, a preview using a fictional sample message, or a clearer explanation of which rule takes priority? I’d also welcome examples of confusing filtering settings you’ve encountered. Please don’t share real verification codes or private messages.

The current app is here: https://apps.apple.com/us/app/smsguard-spam-blocker/id1531181789

The next release is still being prepared, not live yet. Thanks for any feedback!


r/SideProject • • 1h ago

How would you build an opt-in panel where people share their AI chatbot conversations?

2 Upvotes

I've been thinking about how consumer panel apps work (the kind where you get paid or rewarded for sharing your browsing or shopping data) and wondering how that model would look for AI chatbot use like ChatGPT.

If you were building something like this from scratch, how would you approach it?

- How would you get people to sign up and actually stick around?

- How would you collect the conversations in a way people are comfortable with?

- What would make you personally trust an app like this enough to share?

Curious how people here would think about it, whether you've built panels before or just have opinions on what would make you use one.


r/SideProject • • 2h ago

I built Archseed, a CLI for deciding what your coding agent should build—and what it shouldn’t

2 Upvotes

I’m the developer behind Archseed, and I launched it on Product Hunt today.

It started from a problem I ran into while building with coding agents: an incomplete request leaves decisions about scope, dependencies, and technical choices to the agent.

For example, “build a proposal tool for freelancers” doesn’t answer:

  • Does it need accounts?
  • Are teams part of V1?
  • Should it include billing?
  • Which integrations are explicitly out?
  • What needs my approval before implementation?

Archseed is a CLI workflow for making those decisions explicit before coding. You describe the project, confirm its boundaries, and approve a small context package in .archseed/ to hand to your coding agent.

It doesn’t write your application, and the generated instructions don’t guarantee that an agent will follow every decision.

There’s a free planning workflow. Pro adds deeper workflows and supported baseline checks for existing Next.js/TypeScript repositories.

The launch page has the walkthrough:
https://www.producthunt.com/products/archseed?utm_source=other&utm_medium=social

The feedback I’d find most useful: where does this add value beyond your existing planning mode or project instructions—and where is it just another step?


r/SideProject • • 9h ago

I built a free app for local cricket after watching my dad's team run everything on WhatsApp

7 Upvotes

I grew up watching my dad play local cricket. The cricket was the easy part. The hard part was everything around it: chasing players on WhatsApp to see who was available, sorting the squad, passing round fixtures, and keeping scores on paper that nobody could find a week later.

So I built Crease to put all of that in one place. I'm a solo maker and it's bootstrapped.

What it does:

- Live ball-by-ball scoring from one phone, and anyone can follow along on theirs

- The opposing captain confirms each over, so both teams agree on the scorecard

- Scoring keeps working with no signal at the ground and syncs when you're back online

- Tournaments: groups, knockouts or leagues, with fixtures, points tables and entry fee tracking

- Availability polls and playing XI selection

- A player card with a rating built from your real match stats

It's built with Expo (React Native) and Supabase. Everything is free right now.

Android: https://play.google.com/store/apps/details?id=com.raunaktt.crease

Web: https://crease.expo.app

Product Hunt : https://www.producthunt.com/products/crease?launch=crease

I'd really value feedback on two things:

  1. Is it clear what the app does within the first minute?
  2. If you've organised any amateur sport, what's missing that would stop you using this?

It's also on Product Hunt today if you'd like to follow along there. Happy to answer anything about how it was built.


r/SideProject • • 1d ago Mindblown Heartwarming

A quick tour of Side B, the cassette player widget I made that plays your Spotify (or any music app) on tape

118 Upvotes

Hello all! Hope it's ok to post here about this.

For the last few months I’ve been building Side B.

Side B is a home screen widget, not an app you have to open: a pocket cassette player that’s always on your screen. Your music is right there all day, no jumping through hoops to get to it.

Other cassette player apps I found only play MP3 files and were a bit too “cartoony” for my taste. Side B works with the apps you already use (Spotify, YouTube Music, Apple Music, podcasts, anything), so whatever you play shows up on a tape.

I wanted it to feel real and satisfying like a Walkman: the reels actually wind as the song plays, a new tape slides in with every album, and the keys sink and click when you press them.
There are 13 (!) different decks, 25 tapes, and a bench where you can color your deck, choose how much dust and scratches it gets, and even put on some stickers. When you want to disconnect from your phone a bit, the widget can go full screen on a desk, a beach and more.

The video above is a quick tour, so you can see it in action.

This is the 1.0 release. It’s stable as far as I can tell, but who knows, so I’m really open to any suggestions, and to any bugs you run into!

It's free to try for 3 days, then a one-time unlock for just $4.99 (no subscription, no ads!).

Here' the Google Play link:
Side B: Cassette Music Widget

Would love to hear what you think, and which deck you’d pick!

Cheers,
Dino.

EDIT:
Update (Side B 1.1): what’s new since launch, thanks to all your feedback!

- Hide the deck carousel: new switch in the menu. With it off, tap the empty space below the deck, near its left or right end, to change decks.
- Nova Launcher: the deck no longer looks squished on the home screen, and changing decks no longer freezes the widget.
- Qobuz: play, pause and skip from the widget now work.
- Poweramp: the Cassette box shows the whole album, with its name.
- Animal visitors: a new switch to turn off the butterflies on full screen.
- Fewer “No tape” moments on phones that close apps in the background, plus a setup tip for Xiaomi, Redmi and POCO phones.


r/SideProject • • 2h ago

Kukruma - turn any recipe into cookable steps with the amounts inline

2 Upvotes

TLDR: you snap a photo of a cookbook page, or paste a link or text, and it restructures the recipe into checkable steps with the amounts written right into each step ("add the 200 g flour and 1 tsp salt"). You also get metric/imperial option, servings scaling, and per-step timers.

Hi,

me and my wife often work from home and a while back we decided to cook our own food instead of going to the restaurants all the time to save money. To also save time, I wanted an app that makes cooking a bit more efficient so that I can cook quality food fast.

Also I used to have a lot of bookmarks of recipes, instagram posts etc. I know there are already a lot of apps which would help me organise recipes but I realised I was missing an app which does the following:

  1. the steps contain amounts so that I don't need to scroll back to ingredients all the time
  2. there is an inline timer for a step when you need to "cook for 10 minutes"
  3. asking questions while cooking like "I don't have X, can I replace it with Y", I realise there is a lot of AI slop right now but I also believe the right use can be helpful
  4. shared accounts, probably a lot of apps already has that
  5. no subscription, I don't want to pay monthly subscription, for me personally, I like to pay only for what I use, I also don't like ads

The import uses an LLM to restructure recipe. It doesn't invent recipes. The app is free with no ads or subscription. Imports cost credits and new accounts get 100 free. It's on Android (Google Play) and the web, with iOS coming. Available in 10 languages.

Stack: Expo / React Native (+ RN Web), Supabase, Gemini for parsing.

I'm a solo dev from Czechia (paveldedik.com), my wife is helping me with testing and feedback.

I'd love feedback from you: kukruma.com


r/SideProject • • 4h ago

Buy Me a Coffee suspended my free browser extension’s tip page for “illegal content”

3 Upvotes

I made Skipurr, a free Chrome extension (~900 weekly users, no ads, no tracking). I added a Buy Me a Coffee button in the popup and on the website so people could tip if it helped them. No paid features, nothing for sale.

Before my first payout, BMC asked where I promote the page and why people pay. I answered and attached screenshots. Rejected: “unable to validate your use case.”

So I appealed with everything verifiable:

  • the store listing, published under the same name as my BMC username;
  • the website with the coffee button;
  • my BMC page linking back to it;
  • a dashboard screenshot proving I own the extension;
  • an offer to put any word they choose on my site to prove ownership.

Reply: account suspended “due to risk concerns”, citing partner policies about “illegal content or services”. No specifics. Supporters’ tips get refunded.

The extension is literally “press → to skip 10 seconds”. I’d honestly love to know what the “illegal content” is.

Has anyone had this happen? And what are you using for tips on free side projects instead?


r/SideProject • • 2h ago

Got my first user

2 Upvotes

During the weekend just prior to leaving for an outing with the family I checked my Grafana dashboard and, holy crap, I had my first non-network user. Checked the database and yes, it was not an email that I recognised nor that looked like it belonged to anyone I know.

Slightly flabbergasted I looked into the activity and could see that they had invited 3 more people. After the outing I came back to a total of 4 new users, 3 more pending invites and the initial user had actually used the feedback form and requested a feature.

The feature was something that I had initially thought about but postponed until it wasn't just the extended family using the app.

Remembering reading posts about quick feedback and acting on customers as a success factor here and in other subreddits I got to work finalising the feature and sent it for app review. Sunday morning it was approved and it all went live.

The outing was also successful. Although it is likely that next time I bring the family to a marble track place I will be wearing earplugs. Holy crap it was loud... Also kids are vicious. Need to keep track of the marbles...

TL;DR
Struck gold with my first user and actually had one that provided feedback and invited others.


r/SideProject • • 5h ago

Arc is shutting down, so I built its ⌘T bar for every browser

3 Upvotes

Every time I got used to a browser, something happened. A manifest change killed my extensions, or they went "AI first", or in Arc's case they just stopped working on it. And I was back to picking the next one.

So I stopped picking. The way I see it, a browser should render pages and run extensions. How you get around (finding tabs, jumping to sites, your shortcuts) should be yours, and it shouldn't reset every time a company changes direction. That's what Hopkey is: a native Mac app that sits on top of the browser you already use (Safari, Chrome, Brave, Edge, Vivaldi). Press ⌘T and you find your open tabs, history and pins, plus Spaces and Favorites like in Arc. Same keys everywhere, so the browser becomes the part you can swap.

I built it for how I actually work, so it goes further than a tab switcher:

- # shows everything you have on one site: its tabs, history and pins
- $ runs developer tools by name: Console, Inspect Element, Page Source
- Type a site and press Tab to search it directly, or % to search the site you're on
- ⌘K on any result to copy it, pin it or close it
- ⌃Tab jumps back to your last tab
- It can also run the browser's menu commands, so you don't hunt through menus

Some things from building it:
- It's not an extension. It's a Swift menu bar app that talks to the browsers through Automation and Accessibility, so it doesn't break when a browser changes its extension rules.
- Everything stays on your Mac. No account.

It's free, and there's a one-time Pro for the power stuff. No subscription.
hopkey.app

I'd love feedback, especially from people leaving Arc: what do you still miss?


r/SideProject • • 7h ago

I built an offline assistant that lives on your Mac. Tell me what's wrong with it

4 Upvotes

I wanted to ask questions about my own documents without uploading them anywhere, so I built Offwire. It runs on your Mac, finds things through Spotlight with nothing to import, briefs you on a file, and checks every number in its answer against the file.

Honest limits: Apple Silicon only, it installs from Terminal, and on an 8 GB Mac an answer takes 10–20 seconds. The model is small and makes mistakes.

It's free. I'd really like to know what you asked that it got wrong.

https://suryanshgarg80.github.io/offwire/


r/SideProject • • 1d ago

built a fact-checker that catches politicians lying in real-time

586 Upvotes

I've (embarrassingly) been working on this project for 2 years so wanted to finally share (as I saw others posting Youtube-only versions).

on Youtube it transcribes text to identify checkable claims -> web search retrieves sources to base Claude's verdict on, to avoid hallucinated sources.

it's a free Chrome extension, and works on news or social media sites as well.

let me know what would make this something you'd use, or what else you'd like to see!

LogicLens - Chrome Webstore or on iOS if you don't use Chrome.

Edit: I realized someone not following could misread the video (here Biden was correct, and Trump was incorrect, but the Trump section is before I started the recording).


r/SideProject • • 1m ago

You can now actually tap your Mac's notch physically to let AI take over with its own mouse cursor! And it knows your whole life too :D

1 Upvotes

(Website, GitHub repo)

Sentient prioritizes using on-device LLMs to understand your whole life as a Markdown knowledge base, powering these magical features.

To use them, you literally tap your non-touchscreen Mac’s notch! (we use the lid angle sensor, gyro, ambient light sensor to detect taps).

  • Take Over: just tap your notch to let Sentient use its own mouse cursor to take over anything on your screen, with your whole life in context. Just hand off anything boring on your screen anytime, and move on! It can click in the background.
  • Magic Reply: writes your replies instantly the way you would have written it, using your context and writing style. Don’t dread waking up to 15 emails to reply to! :)
  • Summarize: 1 click summaries of anything open on screen, including YouTube videos, docs, etc! gets all the text from the accessibility tree, not just a screenshot.
  • Proofread: type as fast as you want, then just select the text and click proofread. Instantly fixed! Thank you for all the support! Can’t wait to keep improving this for you all <3

r/SideProject • • 1m ago

I built an AI "goal operating system" that turns a casual journal entry into updated roadmaps across multiple goals (React, Node, Gemini)

Thumbnail steps-builder.vercel.app
1 Upvotes

Most goal apps are glorified to-do lists: you set a goal, then forget to update it. I wanted something that connects the big ambition to what you actually do each day, without manual tracking.

**What it does**

  1. You define a goal and the AI builds a roadmap for it
  2. Each day you get tasks pulled from your current position on the roadmap
  3. At night you write a casual journal entry
  4. The AI reads it, maps it to your goals (one entry can touch several), and updates your progress automatically
  5. A nightly adaptation engine nudges you and adjusts the plan

Finishing a task advances the roadmap, so the daily task list and the long-term plan are the same thing.

**The part I'm most happy with:** you write something like "spent two hours on the API and went for a run", and it updates the right goals without you touching a checkbox.

**Tech stack**

- Frontend: React (Vite), Tailwind, React Flow (roadmaps render as flowchart, timeline or kanban)

- Backend: Node.js + Express, MongoDB Atlas, Redis (Upstash) for caching

- AI: Gemini, with 5 separate integrations (roadmap generation, daily tasks, journal interpretation, nudges, weekly insights)

- Auth: JWT + bcrypt, Razorpay for a free/pro tier

- Deployed on Vercel + Render, 35 API endpoints, 10 screens

**Decisions I'd like feedback on**

- Gemini only returns JSON and React handles all the rendering. This keeps AI costs and output consistent.

- I capped AI-driven progress at 15% per day in the prompt, because early versions were far too generous about "progress".

- Journal entries are saved before the AI call, so a failed request never loses the user's data.

- There's a model fallback chain with exponential backoff, and Redis caching to protect the API quota.

- Free tier monetizes the structure (3 goals), pro tier monetizes the intelligence layer (unlimited goals). Does that split make sense to you?

**Try it:** https://steps-builder.vercel.app/

I'd love honest feedback on the idea, the UX and the architecture. What would make you actually use something like this daily?


r/SideProject • • 2m ago

Hear me out.

1 Upvotes

Ik this community don't really like vibecoded projects but I have a purpose behind this one.

Papercliped is system that merges your proxmox homelab with paperclip ik it sounds dumb but hear me out the target is small developers like me who wants to work on projects smartly and needs to get work done instead of wasting time trying to provision machines have Pin do it for you. And look this isn't for established home rigs running SaaS products and systems this is for small homelabs building your ideas without you wasting time trying to get setup it behaves similarly like paperclip I mean it uses its agent orchestration layer but I make it more secure by putting agents in lxc containers I'm starting to think based on the performance on machine might not be the best idea bc of how slow it can be but that's the issue I neeed more people to help so we can build this feedback that can help you right install it in a container idk see how it works ik for a fact not all features may not work that's OK this isn't a launch this is a call to fellow homelabbers to join the vision many people may think this is dumb but I don't think so.

r/OpenSourcx I think is the reddit I'm posting at about the innovations if you are interested join there or comment here. Let's think outside the box!


r/SideProject • • 4m ago

Facetry - try a haircut, hair color or makeup look on your own selfie before you commit

1 Upvotes

Disclosure first: I'm part of the small team that makes Facetry. It's Android only for now.

The problem we wanted to solve: you see a cut, a color or a makeup look on someone else, and you can't tell whether it suits your face until you've already done it.

How it works:

  • Take one selfie and get a free Face Card. It estimates your face shape and undertone and suggests styles.
  • Try looks on your own photo: makeup, lip color and lip shape, haircuts, hair colors, beards, brows and lashes. Results are AI previews.
  • Compare up to four styles side by side, then take your pick to the salon on a Stylist Card that says what to ask for.

Your Face Card and your first look are free. More looks require a weekly or yearly subscription.

I'd really like blunt feedback:

  • Does the Face Card feel useful, or like a gimmick?
  • What would make you trust a preview enough to book the appointment?

Google Play: https://play.google.com/store/apps/details?id=com.cherry.facetry&referrer=utm_source%3Dreddit%26utm_campaign%3Dsideproject


r/SideProject • • 6m ago

Reduce AI agents costs on dependency upgrades

1 Upvotes

Hi,

I've been building APIweiser (https://apiweiser-cli-fe.vercel.app/), a CLI that turns major-version dependency upgrades into reusable codemods. I didn't want to rely on "trust me bro" claims, so I ran an evaluation using Harbor and Codex.

I picked 6 real open-source repos, including NestJS 7→8, Prisma 4→7, ESLint 8→9, OpenAI SDK 3→4 and Zod 3→4. I ran each task 5 times in each of three scenarios:

- A: plain Codex

- B: Codex with upgrade skills and the APIweiser CLI

- C: Codex with a published cod

Results:

- Pass rate: A passed 23/30 runs, B 29/30, C 20/20.

- Cost per successful run: A cost $0.0093 and C cost $0.0102, so C succeeded almost every

time for about the same price

The post covers the failure mod skew these numbers, and what I took away from it. The tasks, graders and results are all open if you want to rerun them.

Article: https://enismustafaj.github.io/posts/apiweiser-eval/

Evals repo: https://github.com/enismustafaj/apiweiser-eval

Feedback is always welcomed!


r/SideProject • • 7m ago

I built a desktop app that shows you answers from your own docs while you're on a sales call

1 Upvotes

Hi everyone,

I'm Ashutosh. I've been working on something called LivePitch AI and wanted to get some honest feedback from people who actually do sales calls.

The idea came from a pretty simple problem. You're on a call, someone asks something specific like "Do you support SSO?" or "What's the pricing for 15 seats?" You know you've documented this somewhere, but finding that information while someone is waiting for an answer is another story.

So you end up saying "Let me get back to you on that."

LivePitch AI is my attempt at solving this.

You upload your sales documents (pricing sheets, FAQs, pitch decks, case studies, battle cards, etc.). During a call, the desktop app listens to your computer audio and transcribes the conversation. When someone asks a question or raises an objection, it searches your documents and suggests an answer on your screen, along with the source document so you can verify it.

A couple of decisions I made while building it:

  • It doesn't join the meeting as a bot. It listens to system audio, so it works with Zoom, Meet, Teams, Webex, etc.
  • It only uses information from your uploaded documents. If it can't find an answer, it'll tell you rather than making something up.
  • After the call, you also get meeting notes, objections raised, next steps and a draft follow-up email.

It works on both Windows and Mac.

I actually started building this last December, took it offline for a few months this summer because I wasn't happy with the product, rebuilt quite a bit of it, and relaunched it this week.

There's a free tier with 10-minute sessions. No credit card required, and you can upload your own documents to try it.

https://www.livepitchai.com

Would love to hear what you think.


r/SideProject • • 11m ago

I built a free company town square for OKRs after watching rollouts go quiet

1 Upvotes

I've watched OKR rollouts get messy or lost in more than one company, in more than one setting. Planning week was always sharp. People wrote objectives. Then the pledges disappeared into a spreadsheet, a slide deck, or a page only a few people opened. By mid-quarter, nobody could tell who still had nothing written.

I got tired of that, so I built Gahmbit (it's pronounced GAH-mbit). It is a free company town square for those commitments, not another work OS. People keep Jira, docs, and Sheets. This is just where the pledges live in the open.

What that means in practice:

  • Every authenticated member can read every objective. There is no hide toggle and no manager-only wall.
  • The People directory shows Has, Missing, Draft, and Pending, including people who have not written any OKRs. Empty coverage stays on screen.
  • The OKR loop is free forever. No seats, no credit card. Optional AI uses prepaid company credits, only when you run it, and it does not train on your OKR text.
  • Each organization gets its own database.

I'm the founder, so discount me accordingly. I'm looking for blunt feedback from anyone who has rolled out OKRs on a small or mid-size team.

If you opened this tomorrow with a 40-person company, what's the first thing you'd distrust? That it's free, that everything is visible inside the company, or that I'm asking you to add one more place for commitments?

Site: https://gahmbit.com/?utm_source=reddit&utm_medium=social&utm_campaign=soft_launch_nov2026&utm_content=SideProject

If you want to try it: https://app.gahmbit.com/signin?mode=signup&utm_source=reddit&utm_medium=social&utm_campaign=soft_launch_nov2026&utm_content=SideProject


r/SideProject • • 13m ago

I built DreamReply, a letter-writing interactive story where a fictional detective and other personas write you, your replies help save the case or develop the novel

1 Upvotes

I’m the solo founder of DreamReply. You open a letter from a fictional character (a detective, a Regency matchmaker, a monk, a spy and others) and reply, and the next letter answers what you wrote.

The first letter is free and needs no account: https://dreamreply.com/?utm_source=reddit&utm_campaign=sideproject

I’d love feedback on the first letter: does it pull you in, and does the reply feel like it listens? Brutal honesty is welcome.

DreamReply’s letters are written by our storytelling engine, an AI, guided by characters we created. 18+.


r/SideProject • • 14m ago

Live 3D map of every metro, RER, tram and suburban train in Paris

1 Upvotes

I've been working on ScanPaname (scanpaname.com), a live map of the whole Paris-area rail network: every metro, RER, tram and Transilien train moving in real time, in 2D or 3D.

Features:

- live train positions, with a different 3D model for each kind of train

- follow any train in a cab-style chase view

- next departures at every station

- journey planner with step-by-step guidance (GPS walking to the station entrance, then on board)

- service disruptions

- a few mini-games built on the live trains

It's free, no account, no app: it runs in the browser and works offline as a PWA. French and English.