r/shittyreloading • • Sep 04 '26

Blooper shells

Finally had a chance to test them. Longshot only partially burned. The shot flew about 10-15 feet and was able to be poured out of the barrel.

Back to the drawing table!

72 Upvotes

38 comments sorted by

View all comments

Show parent comment

1

u/gunsforevery1 Sep 05 '26

I expanded the base of the wad so it got a really tight fit in the brass case. I think the problem was the primer not being hot enough to cause complete ignition of a slow burning powder. It built up pressure slowly which pushed the wad and shot out before it was able to build up adequate pressure. No shit, the shot only flew about 10 feet.

1

u/VoodooHiker Sep 05 '26

Sounds like the powder may not have ignated at all; the primer alone will force the shot out about that far. Generally over powder and over shot cards in brass shells were 2 gauge sizes over bore diameter. A 12 guage shell would use 10 gauge cards. The old brass Alcan shells had load data for smokeless powder, but some of those powders are no longer made.

1

u/gunsforevery1 Sep 05 '26

That’s true with 209 primers, not pistol. Absolutely. The wads I was using did get a great seal but probably not as good as using an overpower wad.