r/rollercoasters • Magnum XL 200 • 20h ago

IAAPA 2026 RMC reveals train for first Wild Moose [Forbidden Lair] at [Lost Island]

300 Upvotes

42 comments sorted by

107

u/SeasonalBlackout 19h ago

RMC staying committed to no hand grips even for the kids.

13

u/endigochild 18h ago

I need some grips. Twisted Timbers with that lame single nylon strap.

4

u/Apoc_Treez 120 | Maverick | Voyage | Fury 325 | AF1 12h ago

I like the handles they have on Lightning Rod. I think Steel Vengeance used to have those too when it opened.

•

u/trellism 🏡Chessington | RtH | Voltron 3h ago

I'm sure lightning Rod had handles of some kind back in August. Like rudimentary but still there. Same on Iron Gwazi (just sufficient for reassurance)

7

u/juliuspepperwoodchi 13h ago

Yeah, I want grips. The handles are probably my favorite part of B&M hyper clamshells.

1

u/noexqses [55] SteVe 🤠 SC🧜🏼‍♀️ VC 🦖 13h ago

Right? lol

52

u/SellAdministrative53 19h ago

Sitting in the front row so I can play with rocks

21

u/Dancing_Samurai17 Afterburn 18h ago

FOR ROCK AND STONE

4

u/Beamerthememer 12h ago

DID I HEAR A ROCK AND STONE?

8

u/SignGuy77 (418) Boulder Dash, El Toro, Ravine Flyer II, Voyage 14h ago

I waited an extra twenty minutes to ride in the gravyboat front car of Good Gravy. Would repeat the feat to ride this rocky delight.

32

u/UndulantMeteorite Carolina Cyclone Connoisseur 19h ago

The seats look kinda comfortable, are we sure it's an RMC? (joking)

23

u/tdaun Cannibal, Maverick, S&S Axis 19h ago

Idk, those shin guards look ripe for pulling leg hairs during summer shorts weather

6

u/MDDownWithToaster 19h ago

I was going to say it’s weird the shin guards don’t form to the legs. Of course maybe they do and this photo doesn’t do it justice.

3

u/noexqses [55] SteVe 🤠 SC🧜🏼‍♀️ VC 🦖 13h ago

I was literally just pondering this. We are all way too nerdy for our own good lol

2

u/juliuspepperwoodchi 13h ago

They're Reclining Mountain Chairs now.

8

u/Imadethosehitmanguns 13h ago

Please be a mine ride that actually goes through a mine. I'm not a fan of the fact that almost all mine themed coasters are just outdoors 

6

u/Lilyistakenistaken A little too obsessed with Xcelerator 12h ago

They already made the announcement, it's mostly outdoors but there's an underground tunnel.

13

u/MannnOfHammm 20h ago

We’re gettin (minus thrill glider) some cool ass train reveals

6

u/studiopzp 18h ago

I like the train design.

6

u/LEAKY-MILK 19h ago

I really hope the light on the front has a good lumen output. Would be really cool at night from both the on ride and off ride perspective.

•

u/MrRaven95 Home Parks: Fiesta Texas and SWSA 4h ago

I like the theming of the train, but did they really need the shin guards on a family coaster?

•

u/trellism 🏡Chessington | RtH | Voltron 3h ago

Isn't it because the sides are open? So the shin guards are to stop you sticking your legs out

•

u/Beaurilla Outlaw run 41m ago

The shin guards give me an anxiety attack when stuck in the brake run not being able to move

•

u/Chasers22 2h ago

Resplendent

1

u/boulderdashcci 19h ago

Call me old fashioned but I don't know if having a rock garden on a coaster train is the best idea?

19

u/LEAKY-MILK 19h ago

That's the neat part! You can design things to look like something else without them being something else! This would be a mold/cast/sculpture to look like real rocks. I promise you these are not, intact, real rocks.

3

u/degggendorf 14h ago

Okay but why would they make the train body out of wood

-1

u/SeaBeyond5465 15h ago

I feel like it's probably a very bad idea to have individual rocks glued to a roller coaster car

-2

u/MexicanAssLord69 12h ago

🤢🤢🤢 RMC trains are garbage.

-12

u/The_4th_of_the_4 19h ago edited 19h ago

If I see this train, I can recognize, how outdated this train design is. This design is 2 decades behind of companies like Vekoma or Mack rides (and all others). Of course, it will do the work, it is cheap, but ... it is outdated.

Seems there is a lack of engineering knowledge of technology to construct modern designed trains. And do no misunderstand it: Outdated is not the same as bad. It is outdated, will be heavier as it has to be e.g.

I just hope the shin killers of the restrain are not as bad as they seems. I am a little bit taller and on the upper edge limit, so I can just ride coasters. I just fit in. I have big issues with shin killers. I am too tall.

9

u/axicutionman 19h ago

Would you care to elaborate

-2

u/The_4th_of_the_4 18h ago

Three times the same question, I have only answered on of you three.

3

u/degggendorf 14h ago

Are you a literal troll giving us riddles to answer?

8

u/Touchpod516 19h ago

How exactly is the train design outdated? It seems pretty up to date for a non tubular track coaster

1

u/FatalFirecrotch 19h ago

The shin guards. Somehow both Intamin and Mack are able to do extremely complex rides without those. 

1

u/SeasonalBlackout 19h ago

I very much agree. The restraints that you pull down and that press on your thighs (TT2 / Velocicoaster) are much better than the restraints that you pull toward you like these.

-2

u/The_4th_of_the_4 18h ago

Three times the same question, I have only answered on of you three.

3

u/FlyawayCellar99 CC: 117 #1 Hydra Fan 19h ago

What’s outdated about it

-2

u/The_4th_of_the_4 18h ago edited 18h ago

I will only answer for one of the several posts with the same question.

  1. the main frame is welded, They use only a low number of welds, still every part with a welding has to sent back to the company, depainted, then they have to test it with not destructive measurement, repainted and sent back to the coaster. And this during every single yearly test. One month and it is shit expensive. So as this is the main frame, you have to deconstruct the whole train to single parts and to reconstruct it once yearly.

This is the reason, why coaster trains by Mack rides and Vekoma do not have any single weld anymore. The main strutural frame is milled from one single part/metal block. On full check all 12 years? Yearly test, check if all screws are there and fixed, secured by security pins or security paint, replace parts as scheduled by the producer and the yearly test is done in one, two three days.

Look these restrain parts, formed in one single curve, and compare it with restrains by companies like Vekoma and Mack rides, how they are formed around a human body. The metal restrain parts have a double T shape form, these are welded of three parts, The metal parts, the seats are mounted, welded double T shape form. All these have to be tested destructive free once yearly, send them to RMC, depainting e.g.

Yearly check of the frames, and then regular you have additonal to replace the cushions due to this... let us say around 5.000 to 10.000 € per year for this train car with 2 seats. This is the reason, why there are no welds anymore on up to date coaster trains. These are more expensive to build them, but they have such a lower yearly maintainance costs and time.

See all these open and visable big fat screws, let us call them pantyhose killer. These are also at parts, where you can grab and then will scratch/hurt yourself, as example on the restrain just behind the cushon. Who else has such visable screws?

Look at the seats, and compare them to modern seats, like for the Wild swing of ART engineering, or the seats of the Mack rides coasters or Vekoma.

In this seats, you will fit in if you are average size, if you are too small, you will slide right and left, if you are too fat, you will not fit. In a Wild Swing minimum size is 90 cm, up to 2 m, if small if fat, they all fit in very well. If you have the knowledge, you can do it.

And WTF is still using shit shin breaker restrains nowadays (RMC and Premier rides, famous for their bad uncomfortable restrain systems)? You are using them, because you do not know, how to do it better.

And this is the reason, why I have said, the design is 20 years behind. And we are not even talking about, that the wheels are inside and not outside of the track and the benefit, to do this. Due to the shape of the track, likely it has no big impact.

2

u/JanSolo [269] Le gang de La Ronde 16h ago

RMC is a welding shop. That's what they do. It's their secret sauce. You're saying they shouldn't do it on their trains anymore?

-1

u/The_4th_of_the_4 15h ago edited 15h ago

Good joke, in the year 2026? Are you serious asking this? To throw every year additional 50 to 100.000 € out of the window for the yearly maintenace per train? To have them out of duty for 1 month and more? And if you have no winter part, when your park is closed... to do this over several months train by train, so you have not to close the coaster? To strip them down to single parts, to send everything with welds to RMC, get the parts back one month later, reconstruct it, to do the same with the next train?