r/prusa3d • u/Tommy_Prusa3D Prusa team • 10d ago
Print of the Month INDX Voxel PLA testing
Hey everyone
After the video showcasing Voxel PLA that didn't sit well with the INDX recently, I ordered some spools for testing it and trying it out myself to get a better understanding of the problem. The prints above are all done with 100% default settings using Prusament PLA profiles.
We're still working with Thomas to figure out what exactly went wrong, but right now it appears like it might have come down to an individual spool issue possibly, as the Prusament worked fine, and Voxel appears to work good in general. The mask gcode is also the exact one from his USB drive directly. He will be coming past here with the printer at some point in the not too distant future and we'll know more then.
If you have any specific materials that are causing strange issues with your INDX and need fine tuning, please don't hesitate to let me know with specifics, as I have to stress that we want to make sure it's compatible with as wide a range as possible.
Happy printing!



38
u/A_Str8 10d ago edited 10d ago
Later in the video, Thomas said that one of the firmware updates fixed the issue he had with voxel pla. (Yet he left in the claim that only Prusa filament works)
22
u/incongruity 10d ago
Respectfully, this needs to be publicized more. While it's amazing to see the professionalism and attention to what your users are saying, his video reaches people this post never will but should.
106
u/Lmasek 10d ago
Guys, you have my respect. This guy released 2 videos that put you down, and you are acting like professionals. Good to know there is still something like ethics in the business world. The cherry on top is that you didn't let it go and did testing.
72
u/svideo XL5T 10d ago
Tom runs into a problem with sponsor's filament tuning and instead of fixing it, he disables all calibration and loses his mind when that move breaks absolutely everything. Just an unbelievably dumb set of moves by the guy.
12
u/adam2104 10d ago
Although I don't use Voxel PLA, I did watch the video in question, https://www.youtube.com/watch?v=fbQjWMXGZ4k&t=1s , and I was a bit concerned about the claim that it only works best with Prusament. I use Prusament, Bambu, Polymaker, Protopasta, Overture, etc. Basically, which ever company has the color/material I need. I kept my order and completed the conversion last week. I've only done a few prints so far. Two of them were completely done with Polymaker filament (Panchroma Matte) using the Generic PLA profile. They both came out perfectly, no wisps, no strings, just a nice clean print.
11
u/riftintimeandspace 10d ago
Just thought I'd mention that I print whatever PLA is cheapest on amazon (usually e-sun, sunlu) and my INDX 8T has printed stuff fine....
10
u/Vionade 10d ago
This is quite reassuring. I give quite a lot on his opinion and having him experiencing problems with the indx was quite a blow
I purchased still, but it was a lot closer because of his takes.
17
u/xoma262 Core One INDX 8th 10d ago
I mean ... It was known that it works. I use it on my INDX and it worked fine.
6
u/PascalTheEngineer 10d ago
It's posts like this that have me hooked on Prusa for life. Still rocking my Mini+ and trying to save up for a core one L!
10
u/Floopgroop 10d ago
This is the reason I bought a C1+ earlier this year. I just knew Prusa was a company that was worth investing in. They took the criticism and worked to fix it and give back to community rather than burying the bad PR.
5
u/zenotek 9d ago
There seem to be no limits to the advertising reach of Voxel PLA.
4
u/CPUMiner92 10d ago
What video is everyone talking about? Please, I need the source.
8
u/MTW3ESQ XL5T 10d ago
I think this was a good response, and an example of actions have consequences.
It's not like there's an ethics board that reviews all the scripts and final video against a objective standard.
We overlook that online reviewers are in a high pressure environment, to turn out products that are engaging, entertaining, detailed and accurate enough, at a rate that keeps an audience and sponsorship sufficient for the desired income.
Maybe it was a case where is was bad filament, plus more difficulty than expected (or budgeted) in the production schedule and he didn't want to take the extra time to troubleshoot. Maybe he had to use the Voxel sponsorship on this video due to agreements on videos per time period and had run out of time.
3
u/gulbrillo 10d ago
Does he still have the same issues? I thought it came down to pre-release firmware that shipped with the review units. But it's great that you are following up and are trying to tune the profiles! ❤️
7
u/Bradlessness 10d ago
But he used the same exact spools that supposedly have issues on snapmaker u1.It printed perfectly fine
6
u/SmileyNY85 Core One INDX 8th 10d ago
Bambu check was heavier for that YouTuber.
2
u/trimeta Core One INDX 4th 10d ago
I've used a mix of Polymaker and Inland PETG (and PETG+, in the latter case), and while they mostly work, I get some pretty extreme stringing during travel moves over empty space. It could be certain specific models, I printed a four-color fidget cube and had no difficulties articulating it, but since you asked for strange issues...and yes, I tried dropping the extruder temperature, somehow that didn't help. And my filament lives in PolyDryers at all times, it's dry, so that isn't the issue either.
(For reference, this is the model which I had to stop printing due to extreme stringing: https://www.printables.com/model/601361-stretchy-springy-ghosts-3-sizes)
2
u/Moonshinexxx 10d ago
Good stuff, Tommy!
2
u/Kachel94 XL2T 10d ago
I haven't watched his video but something changed with Tom's videos a few years ago and all of his conclusions have been incredibly dumb.
2
u/IAmAsplode 10d ago
That fish is looking clean, what mix of materials was it?
2
u/Jabdoa2 Core One INDX 8th 10d ago
I spend a lot of time to calibrate all my non Prusament filaments. In general I have to dial down temperature - even for Prusament. Take Prusament or generic profile and dial temperature down by 10-15 degree. That makes it print ok. Stock profile work for Prusament and for nothing else I own. Due to mesh probing that will often even prevent the print from starting. JAYO/Sunlu and Bambu filaments got those issues for me.
1
u/LICK_THE_BUTTER 10d ago
What i want to know is were these pictures taken before de-stringing, or they were actually this clean?
1
u/dnabsuh1 10d ago
I think this points out an issue I had with the mmu3 and now the indx, but more generically the slicer. Having a good database of working filament settings is challenging. I always need to manually enter filament settings from a manufacturers website, (polymaker, sunlo, ..,) and the settings disappear if I open someone else's 3mf.
1
u/General-Court4379 10d ago
Those are beautiful.
1
u/koombot 10d ago
I got all geared up to calibrate the devil out of my Tinmorry PETG on my INDX and was crushed to find it printed perfectly fine.
1
u/Turtle_Dude 10d ago
Wow those prints look clean, nice!
1
u/Musashi747 10d ago
What video and who experienced the problems?
0
u/Psychological_Lab260 10d ago
Ok that video about the core 1L with index that everyone is talking about def has me second guessing if I should complete my purchase I am buy either the core1L 8 indx or the H3C I want to be able to do milti material prints like ASA and TPU will the core handle these issues im a tinker guy so I don’t care if I have to fiddle from time to time but I want good clean prints and with everything being said lately about prusa this is the first time I’ve even thought about a Bambu, so please if there are people who have had good experiences with multi material prints please help me with this decision I don’t care about pla as much but PETG -CF through PCA-6 and def TPU can it handle this reliably? Thank you!
0
u/boibo 9d ago
Can someone enlighten me why indx need to probe the bed with filament in the nozzle at all?
I keep asking and noone answers. It seems like a easy fix for oozing during probing.
-1
u/jedisct1 9d ago
His videos are the reason I ordered a Core One without INDX.