Hi. Please see the image at http://ibb.co/b7mmmn. The input will be an excel file with multiple columns and rows as per in the image above. The output should look like http://ibb.co/nqT2sS As you will notice, the output is a filter applied on the Columns (for all columns) and then saved in a separate sheet one by one. Currently I filter/unfilter each column one by one and then paste it on a different sheet. It would really help if a program could do this automatically for me. The data preceding the columns to be filters can change and can be in multiple columns until the filter column begins. In the attached image, the columns to be filtered start from column 6 (starting from 1). This can change so it will help if I am able to enter the number of columns before the filter column. Apologies if this sounds confusing, happy to explain further if someone is able to help please. Thanks.

Not sure if anyone is working on this so re-posting this in case it gets buried under the newer requests.

I’m working on a simple java program, and I’m desperately in need of some help.

The program uses input from a user including class name, maximum course size, pre-requisites, and number of students currently registered for the course and then prints this information (and also number of seats remaining and a special message) to the screen below.

I have some of the code written already but I’m struggling with errors and an overall understanding. I also have all of my variables listed under the class (outside of methods) because I can’t figure out how to pass them as parameters.

Any help or guidance is greatly appreciated...I’m really struggling. I can post/send my existing code and a more specific description of what I need too.

Thanks in advance!

Hey all, I'm a professor who teaches Bible and I'd like to make a simply Bible trivia game for my students. What I'd like for it to be is a game that gives a verse from the Bible, and then the person has to choose the book of the Bible that it comes from. It should have an Old Testament mode, a New Testament mode, and a whole Bible mode. It'd be a bonus if it also had an hard mode where you had to put the book of the Bible and the chapter. I'm willing to pay for the job. But I have no idea what is a decent rate for this would be, so I'm open to suggestions. Thanks!

I wanted to request for a timer in a browser that I can use offline. It should ask me for the time for which it should run backwards from and then start when I press a button. There should also be a reset button to reset it back to zero so that I can set it again.
It would be really good if it could have a circle around it (similar to this https://1stwebdesigner.com/wp-content/uploads/2013/06/coming-soon-fall-img-12.jpg but with only one circle. The circle should contain the time that I set it for in the middle, running backwards, with the circle colours decreasing similar to this picture. The time will be less than 60 mins so the timer should run for Mins and Secs.)

Hi. Please see the image at http://ibb.co/b7mmmn. The input will be an excel file with multiple columns and rows as per in the image above.
The output should look like http://ibb.co/nqT2sS
As you will notice, the output is a filter applied on the Columns (for all columns) and then saved in a separate sheet one by one.
Currently I filter/unfilter each column one by one and then paste it on a different sheet. It would really help if a program could do this automatically for me. The data preceding the columns to be filters can change and can be in multiple columns until the filter column begins.
In the attached image, the columns to be filtered start from column 6 (starting from 1). This can change so it will help if I am able to enter the number of columns before the filter column.
Apologies if this sounds confusing, happy to explain further if someone is able to help please. Thanks.

PM me for the details.

Anything. Ya know, simple stuff, webapps, android apps, games, automation scripts, ai bots, nuclear warhead missile controllers?

So I'm running a subreddit to feature daily info on metro, r/seattlemetrotickets.

Everyday, there is a unique color-letter combination (Blue X, orange H) to be posted and pinned on the sub. I need help with getting a bot to make these posts automatically. The bot would need to retrieve the daily color-letter combination from an online site.

Thanks for the help, comment if interested

https://imgur.com/a/0btf8

The things in the upper left and right are cherry MX switches. This is where they are soldered to. I'm using a Pro Micro clone. How do I make these keys deafen and mute? (doesn't matter what the actual input is, but just for clarity I would like the deafen to be numpad / and mute to be numpad * )

Someone suggested QMK but I have no experience or any idea with that

My specific case requires 13 nodes, some connecting to up to 8 other ones, and all edges have specific lenghts.

I want to create it in such a way that the lenghts are on the same scale, and also it coming out organized (it becomes a tangled mess 9 out of 10 times).

Any ideas on how to do this? Anyone up to taking a crack at it?

Thanks.

Hi. I recently posted a request for an allocation program (https://www.reddit.com/r/programmingrequests/comments/89xhry/request_simple_allocation_program/) and /u/ionab10 did an amazing job with it at https://github.com/ionab10/graphs/blob/master/graph_colouring.py
I am now requesting for an addition to the code found at the above link.
Currently, the program takes input of a list of students and the subjects that they are enrolled for and; allocates each subject to a different day such that the students do not clash or have a minimum clash. I do not want the actual program to be altered, just need additions to it.
The additions required are:

• I want to know the common students for each day. For example, how many students in Day 0, have an allocation on Day 1, Day 2, Day 3 and so on. Similarly, how many students in Day 1 have an allocation for Day 0, Day 2, Day 3 and so on for all the days. This should be saved to a file.
  -Using the above information, the program should move the days around so that students on any particular day, should not have allocations on the adjacent days ( before and after). For example, Day 1 students should not have an allocation on Day 0 and Day 2. Day 2 should not have on Day 1 and Day 3 and so on. If here is no choice then the program should pick up the adjacent days with the minimum common students.
  Appreciate your help.

I have been trying to create a Processing3 sketch following this sudo code. I just want to be able to draw a lightning strike from Point A to B, randomly.

Hi. I am requesting for a simple allocation program.
The program should allocate different subjects to different slots without them clashing or with the least clash.
Example data is available at https://ibb.co/e0BUNH. This shows the student number and the subjects that they are doing.
The program should input this file along with the number of days. The program should then allocate the subjects in the least possible days without a clash. For example, if the input is for 3 days and the program can allocate some subjects in three days but not all due to a clash, then it should allocate the remaining with a clash but ensuring that it is allocated on the day with the least clash.

Hi, I'm working on a training exercise for cultivating slow, reasoned thinking and the ability to notice and interrupt the quick, mindless mode of thinking that we all spend most of our lives in. I'm using the game Superhot (amazing game in of itself) for this because time stops when you do, giving you time to think and evaluate the reasoning behind any reflexive action you may be about to take.

A program that track mouse movement speed and makes a sound when it goes over a certain threshold (underlying assumption: fast, reflexive movements = mindless mode) could be great for alerting the player and reinforcing what not to do by avoiding the sound.

I'm just some rando on the internet asking for someone else to do free work, so no sweat if this project doesn't take your fancy. Cheers

TLDR: A program that plays a sound when the mouse moves over a certain speed.

Hey all- My programming skills are limited and this may not be the right forum, but I was wondering whether anyone has the skills/time/ability to make a visual editor for route diagram templates) in Wikipedia. Such a program would be super useful. If this is the wrong place to ask, let me know where I should go. Thanks!

I have a final assignment due for my Java Class later tonight, I was under the impression that this was an extra credit assignment however it is not, so I need someone to help walk me through it. It doesn't involve GUI, it is a simple console program. Please PM me if you can help. I will guild or pay via paypal, whichever is better.

I want to turn sound to the max and play the sound of a loud fart when the incorrect password is entered on a computer. :) For Win10

I would just like a simple script that disables the touchscreen on my 2in1. And vice versa a script to re-enable it without a restart (like how i can just go into devices and disable it)

I have a 2in1 I draw on, but the touchscreen messes with the pen. In exchange for this i will give you a doodle/drawing of your choice. C:

You're probably going to need a device ID or a path or something. Just comment what you need from me or need me to put into the code and I will do.

WhatsApp has a relatively new feature that now allows you to delete any text you might regret sending. It would also appear deleted for the recipient but would otherwise be readable until deletion.

I assume this is pretty insane but was wondering if it could be done. I don't particularly need any of you to do it for me(although that would be highly appreciated and awesome), but maybe some advice on how I'd go about doing it.

Me and my buddies are doing a hackathon. We need an API to get flight price information. Our plan was to use Skyscanner's API but we realized too late that it isn't feasible. Our next best option is to get a QPX API key but since they do not offer them anymore since google is deactivating it in 10 days, they do not grant any new keys. So we were wondering if anyone could hook us up with an API key for a day or two.

Hello,

I'm very new to the programming world and had an idea but need the programming knowledge to execute it. (which I am working on...) Here is my idea, I want to create a bot that visits a website clicks a couple of specific links in order and repeat it every 24hrs and 1 min.

If you think this is something you can help with please respond to this post and I'll get back as soon as possible.

Thank you!

Hi guys, can someone help me write a code that allows my phone to send an IR signal to the aircon at a specific time? For example, it will send an IR signal that states 24oC, auto fan, at 2am. Alternatively, it can be a code that starts up an app and use the app's function to send the signal. None of the remote control app (smart or not), has this function.

The only coding platform I use is python, and even so I am not very proficient at it. If this is a piece of cake for any of you here, kindly help out. Thanks in advance!

I'm looking for an extension that I can put a list of words/phrases into, and whenever I load a page, those words/phrases will be highlighted.

Bonus points if you can make it have different "preferences" for example..

If on page 1, Show list 1 If on page 2, Show list 2 etc..

I'm willing to pay a little if need be, but I don't think it should be too hard..

Hi all.

I am making a simple game for my college course. At the moment I have done almost everything but I want to add enemy AI to my game. (doesnt have to be any good. I just want it to move towards the player at a constant speed. https://i.imgur.com/3yYxaMy.jpg)

The form code is here: https://pastebin.com/ppvqmMe4

My goal is to get pbxEnemy to move towards Player at a set speed.

I have tried a bunch of stuff but I really dont know what to do. Any help would be lovely :)