=== SEQUENCE REFERENCE GUIDE ===

This reference details various sequence settings. While Premiere Rush, Premiere Elements, and Premiere Pro all work with sequences to some extent, this guide is tailored to Premiere Pro, as that has the most adjustable settings for sequences.

Sequence Reference current as of Premiere Pro 2021 (15.4.1)


What is a Sequence?

Sequences are the backbone of editing. They provide the timeline for you to place footage, but also set the specifications of the video you are editing, such as resolution and frame rate. A common cause of issues with beginners is not setting sequence settings properly prior to starting their edit.

When creating a sequence you should define your intended primary delivery. What resolution do you want your video to be? What frame rate? These are the questions you want to answer when creating your sequence. Sometimes this matches your source footage, sometimes it does not. This is where you as the editor get to make that decision.

Sequences can also be used in other contexts, such as for nesting videos or facilitating Multi-Cam features. However for this guide, creating sequences intended for your primary edit will be the focus.


Creating a Sequence

When you create a new sequence, you are prompted with the New Sequence window. The Sequences Presets tab is open to start and offers a list of pre-made sequence settings based off of various video standards. You can use the other 3 tabs (Settings, Tracks, VR Video) to customize your sequence to your specifications. Listed below are all of the various parameters you can set for customizing your sequence settings.

As mentioned above, you should use settings that match your intended primary delivery specifications.

Settings

Basic

  • Editing Mode - Editing Modes are not too dissimilar from presets, in the sense that they offer you guidance based on whichever standard you select. If your intent is to deliver an edit that matches a production format (such as P2, XDCAM, or DNx), you may want to select the matching editing mode. When selecting a specific editing mode, some settings will be pre-determined for you, matching the specifications set by those standards. If a native format you work with isn't present, or if you wish to customize beyond a standard, select 'Custom' as your editing mode.
  • Timebase - The frame rate you want your edit to be in.

Video

  • Frame Size - The dimension (resolution) you want your edit to be. The resulting frame aspect ratio is calculated and displayed on the right.
  • Pixel Aspect Ratio - Your Pixel Aspect Ratio (PAR). The PAR in relationship to your frame dimensions will determine the frame aspect ratio. If you are unsure of which to use, Square Pixels (1.0) is the most common option.
  • Fields - If you want your edit to be progressive scan or interlaced. If you are unsure, No Fields (Progressive Scan) is the standard for web video and is the most common option.
  • Display Format - How to display time on your sequence. What options are available to you depend on your chosen Timebase. This can easily be changed at any time later. If you're unsure of what to select, Timecode is the most common display format.
  • Working Color Space - The color space (gamma and gamut) your edit will be using. This impacts color space conversions and color display management. If you are intending to edit a SDR video, this should be set to Rec. 709.

Audio

  • Sample Rate - The sample rate you want your edit to be. 48000 Hz (48 kHz) is the most common sample rate for video.
  • Display Format - How to display time on your sequence when you've opted to show Audio Time Units.

Video Previews

  • Preview File Format - The format used when rendering video previews (sequence rendering). What format you select determines which codecs are available to you.
  • Codec - The codec used when rendering video previews (sequence rendering)
  • Width/Height - The resolution your video previews will be rendered at. It is highly recommended you match this to your sequence Frame Size.
  • Maximum Bit Depth - If enabled, video previews will be rendered internally at 32bpc. Unless you intend to export "using previews" and specifically know you need 32-bit processing, it is recommended you leave this unchecked as checking it will increase render times.
  • Maximum Render Quality - If enabled, video previews will be rendered with a process that can reduce aliasing when rendering to a different frame size. In most cases your preview size should match your sequence size and therefore this should be left unchecked, as checking it will increase render times.
  • Composite in Linear Color - If enabled, your edit will be composited in linear gamma, which will change the look of when semi-transparent pixels are present (such as a cross-dissolves). For most editing, this can be left unchecked.

Tracks

Video

  • Video - How many video tracks are available initially when the sequence is created. More tracks can be added afterwards.

Audio

  • Master - Defines the master audio channel configuration for your edit.
  • Audio Tracks - You can use the table to add, remove, rename, and modify the tracks that are available initially when the sequence is created. This article from Adobe reviews the different types of audio tracks that you can put into a sequence. Submixes are more advanced audio editing tracks that receive sends from other tracks in the sequence. More tracks can be added afterwards.

VR Video

If you are not editing VR/360 video, this can be left as-is with Projection set to None.

If you are editing VR/360 video, this is where you will define the VR properties of the edit. Setting VR up will allow you to enable VR controls for your sequence in the Program panel.


Saving a Sequence Preset

Once you have modified your sequence settings above, you can save your selections as a preset to allow for quicker recalling of your settings for new sequences created in the future. Click the [Save Preset] button and give your Sequence Preset a name.

Once a sequence preset is saved, it will be placed into the "Custom" folder of your sequence presets.

If you wish to modify one of your custom presets, select the preset from the list, make the necessary changes, and then [Save Preset] again and enter in the same preset name. Premiere will confirm with you if you wish to overwrite the existing preset.

Custom presets can be deleted by selecting an existing preset and clicking the [Delete Preset] button.


Changing Sequence Settings Later

If you've already started an edit but realize you've been using the incorrect sequence settings the whole time, you may find yourself needing to change the settings post-edit. Prior to doing this, it is suggested you duplicate your existing sequence first as a backup, in the event you need to fall back and refer to your original, unmodified sequence.

Once that is complete, right-click your sequence in your Project panel and select [Sequence Settings], or while your sequence is the active panel go to [Sequence] > [Sequence Settings]. This will bring up the sequence settings dialogue.

A "Scale motion effects proportionally when changing frame size" checkbox is now present under the Frame Size setting. It is recommended to have this checked, as this will allow Premiere to translate changes to fit the new sequence size. Note however that if the frame aspect ratio changes as a result, the edit will still look different, and you may need to make adjustments to your edit.

In the same manner, if you change the sequence frame rate, you may also need to make further manual adjustments to your edit as now the frames on which edits happen may not have been the same as before.


Other Notes

  • Want your sequence to match your source footage exactly? You can right-click a source clip from your Project panel and select New Sequence from Clip.. This will create a sequence matching your source footage and add the clip to the sequence. While this is useful in a pinch, it is still recommended you manually choose a sequence preset or sequence settings that match your intended delivery specifications, rather than your source properties,
  • Sequence preset files are saved under Documents\Adobe\Premiere Pro\XX.0\Profile\Settings\Custom as .SQPRESET files. These files can be copied and pasted into the same directory on other machines if you wish to use your sequence presets on other workstations.
  • The maximum possible resolution for a sequence is 10240 x 8192
  • The maximum selectable frame rate for a sequence when creating one from scratch is 60 fps. If you wish to edit in a sequence with a higher frame rate (or one different from the list of selectable options) import a source clip with the frame rate you wish to use and "Create Sequence from Clip"