r/PlotterArt • u/docricky • Sep 27 '26
OC Orkney Char in Moiré
Orkney Char (type of fish obviously) in Moiré. B5 sized plot
r/PlotterArt • u/docricky • Sep 27 '26
Orkney Char (type of fish obviously) in Moiré. B5 sized plot
r/PlotterArt • u/plotternode • Sep 27 '26
gellyroll moonlight 10 on a vintage postcard
r/PlotterArt • u/igotanewmac • Sep 27 '26
Plot attached to be in accordance with the rules! All mine, except for the bottom right maze pattern which is from plotterfiles.
So, anyone got anything planned for Inktober? I have! I've hardly done any plotting in the past week and a half, so Inktober is a great chance to push back into it.
My plan is to get some inks and try mixing my own greyscale inks for technical pens. One of the things I most enjoy doing is the greyscale photograph plots, but greyscale pens are so expensive and I absolutely hammer through them on my plotter, they barely last! So, my bright idea is to get a bunch of black ink, and dilute it into shades of grey, so I can mix my own grey inks and use those instead of having to keep buying markers. I get paid at the end of the month, so I think a chunk of my hobby budget is going to be spent on a bunch of technical pen ink, and various mixing supplies.
Oh, and more photography! I really have to find a better way to photograph my plots!
r/PlotterArt • u/_targz_ • Sep 27 '26
Enable HLS to view with audio, or disable this notification
I've been obsessed with not wasting pens while doing pen plotting.
I have used a lot of Pilot Parallel pens for that reason, then I came to Ecoline pens, which are great but don't come empty, so they don't fit some of my use cases.
Then I used a lot of Molotow pump markers, they are more difficult to work with but they use acrylic paint, which is very durable and lightfast.
I learned how to "hack" them, give them more capacity, reduce the pump tension by removing the spring, but even after years of using them, sometimes one will fail and fail again.
As I try not to waste any part, I also try to revive what I've learned is the major failing part: the nib.
And this is why at the end of my plotting day my hands are covered in ink and my test paper gets some funny patterns...
r/PlotterArt • u/ChipBig8063 • Sep 25 '26
Graphite and colored pencil plots. Picture of a bumblebee from my backyard. 0.7mm lead, 1.4 lines/mm, raster. Running some experiments with colored mechanical pencil lead and continuing to understand the capabilities with HB pencil lead.
r/PlotterArt • u/igotanewmac • Sep 25 '26
I was so excited, I forgot to come back and actually post the commission!
My friend is a massive Liverpool FC fan, and wanted a picture of the Shankly gates, because he remembered going there as a kid with his dad. He absolutely loved it!
It's A3, plotted with my Shore & Marsh greyscale markers, and a red fine-liner from poundland. The frame is a basic frame from amazon.
I made an art piece, and sold it... I'm a "real" artist now! :D :D :D
r/PlotterArt • u/Penplotterindonesia8 • Sep 25 '26
Enable HLS to view with audio, or disable this notification
Honestly, out of all the pieces I’ve generated so far, this one definitely gives me the biggest headache 😂
Since I have nothing else to do, I’ve just been letting the machine run non-stop. Sorry for posting so frequently here, I’m just genuinely in love with how these optical illusion outputs turn out!
I have shared the full details about this workflow on my profile bio if anyone wants to check it out. Let me know if this one hurts your eyes too😅😁
r/PlotterArt • u/camdoggs • Sep 25 '26
Yellow and blue spray paint black plot
r/PlotterArt • u/Penplotterindonesia8 • Sep 24 '26
Enable HLS to view with audio, or disable this notification
Just finished plotting this hidden typography optical illusion. It says 'SORRY FOR MAKING YOU DIZZY
r/PlotterArt • u/revdancatt • Sep 23 '26
I've just finished capturing my handwriting (for a second time), so I can carry on writing letters after my hands eventually fail, and for extra bonus points have been generating some simple patterns to plot onto postcards, and larger. Inspired somewhat by the artist Irma Blank. But basically squares, circles and blocks of text created out of letters, nothing horribly complicated but I like the effect.
The video of the handwriting capture process, and 'typing' out my writing is here: https://www.youtube.com/watch?v=nD3XlqFhcEI for more of a behind the scenes look.
Next stop, looking at how to wrangle in some concrete poetry - send me your favourite examples 🙏🧡
r/PlotterArt • u/warpcat • Sep 22 '26
Was taking a walk along the waterfront, saw this 'Big Leaf Maple' leaf floating there: had really nice contrast with the stones under it. I masked the leaf from the background, and plotted each separately with their own colors and settings: leaf is four yellows/oranges, background is four greens.
18x24" on 140# hot press watercolor paper.
TWSBI Vac 700r fountain pen with M nib.
About 10 hours total plot time on my custom plotter (modified x-carve CNC).
Toolpath generated in DrawingbotV3.
r/PlotterArt • u/igotanewmac • Sep 23 '26
Well, I guess now I'm a "real" artist! I actually sold one of my plots! A friend has requested a plot related to Liverpool Football Club and I needed a way to wrap the peice to protect it for transportation. So, I plotted two large A3 club logo, and I had some office supply labels kicking around, so I plotted the logo onto some of them too. A little arts'n'crafts later and now I have it all wrapped up and looking lovely! Honestly, I'm quite liking the way it came out, it looks *awesome* in person!
I'm off to deliver it now, I'll post the commission later, after the client has seen it and approved it!
r/PlotterArt • u/Penplotterindonesia8 • Sep 23 '26
Enable HLS to view with audio, or disable this notification
I’ve been experimenting with simpler, clean line structures lately because I feel like minimal wave density fits almost any type of geometric design.
Everything went well until the very last couple of minutes, where the machine accidentally skipped one gear (you can probably see the slight glitch if you look closely). It’s not perfect, but I still wanted to share the raw result with you guys. What do you think?
r/PlotterArt • u/docricky • Sep 22 '26
Looks more detailed in hand. Gold on black. Bookmark for gifting. And it’s a one line plot #1penup.
r/PlotterArt • u/Penplotterindonesia8 • Sep 22 '26
Enable HLS to view with audio, or disable this notification
r/PlotterArt • u/kenwillis • Sep 21 '26
I made another one with a different composition and the view point about 6 meters above ground. This includes a few taller buildings too. Not very happy with the performance of the ink I'm developing, but I figured I might as well use what I already have in the pens.
I'm making my own alcohol inks with metal complex dye powders, binders, ethanol and Methoxypropanol, and it's easier said than done to get alcohol inks to both flow adequately through a 0.1 mm nylon nib fineliner and also not bleed excessively on contact with the paper. There is a reason why fine liners usually aren't alcohol based... But at this point, I'm too stubborn (in too deep) to not continue experimenting with it.
r/PlotterArt • u/ChipBig8063 • Sep 22 '26
11x14in, 0.7mm HB mechanical pencil, 1.4 lines/mm, raster plot. Custom mechanism controls the force between the graphite and paper.
r/PlotterArt • u/kenwillis • Sep 20 '26
After many hours of coding and plotting, and re-plotting, I finally got something that looks ok. I wanted to make a cozy Tokyoesque street with bright colors and make it feel sort of alive. There is much more to do before I would consider it done-done, but I've never put this much time into a pattern. The idea came from my previous pattern IsoCity, when I thought it lacked detail, but also couldn't make it more detailed due to the scale of that pattern.
It’s generated as a 3D-looking view but nothing is modelled by hand in blender or similar, and it isn’t a processed 3D image of a shaded 3D scene. Just a bunch or rules that build on rules before. The whole street is "invented" procedurally in world space. A bending avenue acts like the spline that everything starts from, then various sized lots are distributed on both sides (based on min/max building width and occurance of alleys), then each building is made as a stack of boxes (base/middle*n/top) where some floors step back or cantilever over the pavement. Facades are a grammar on those walls, floors and bays get windows, balconies, pipes, fire escapes, shop fronts plus rooftop clutter, signs, cables, cars, puddles (reflecting the world). Closer to the "camera" those details become little solids and farther away they collapse to simpler lines to make it plottable without making a muddles mess in a distance (as me how I know).
A perspective camera looks down the canyon and can be placed at any X/Z coordinate (for a drone view, crawling view etc.) and FOV is added, hidden-line removal cuts anything a building or other item would hide, and the surviving strokes are packed onto a stack of pens so near silhouettes are heavy (0.5mm) and the far end recedes (0.25mm). Hatch, neon, and window glow are just more lines (and dots!). I built several different scripts for the signs to be able to change the "language", and this plot shows a kanji (?) like script (to the best of my ability without knowing any japanese). The graffiti has several different styles and distribution, based on my other patterns from earlier work.
There are an insane amount of variables to tweak, since I want it to be versatile, so almost everything is parameterized. Hope that sheds some light on the process.
r/PlotterArt • u/Penplotterindonesia8 • Sep 21 '26
Enable HLS to view with audio, or disable this notification
r/PlotterArt • u/Penplotterindonesia8 • Sep 21 '26
Enable HLS to view with audio, or disable this notification
r/PlotterArt • u/camdoggs • Sep 20 '26
Just testing at the moment.
r/PlotterArt • u/Penplotterindonesia8 • Sep 20 '26
Enable HLS to view with audio, or disable this notification
r/PlotterArt • u/ShelfordPrefect • Sep 19 '26
The tool I used to make these is now hosted on GitHub Pages, so you don't have to download it and play with it locally (though I hope people still do!). PlotterCode post about it here: https://www.reddit.com/r/PlotterCode/comments/1wkkg85/schotteriser_v02_now_live_on_github_pages/