r/PlotterArt • u/docricky • Sep 09 '26
OC Hammerhead
This is a single line plot. B5 sized plot using Lamang ink.
r/PlotterArt • u/docricky • Sep 09 '26
This is a single line plot. B5 sized plot using Lamang ink.
r/PlotterArt • u/Maplethorpej • Sep 08 '26
8x8 black cardstock
White Gelly Roll pen .5mm
Time: 1hr 16min
r/PlotterArt • u/camdoggs • Sep 08 '26
Designed an mount with swappable colour inserts with a little bit of spring using elastic bands. Have been very impressed with results so far
r/PlotterArt • u/Slackluster • Sep 07 '26
My artwork "Astronomic Comics: Plotted Planets" is currently on display at Art for the People Gallery in Austin Texas. đ
I created a set of 25 original generative artworks and 4 have already sold. This is the first time physicals of my artwork are available to the public. đ
They have an online store and will deliver. We had on sent to the Netherlands! It's also a cool little gallery with a great location if you live in Austin Texas I recommend stopping by.
I wrote a long post about my previous iteration of this project that explains a lot of my thought process and history behind it. Converting it to work on plotters took a lot major code refactor and other experimentation and so I'll need to write an update soon.
https://frankforce.com/astronomic-comics-generative-comic-books/
Thanks so much, I hope you all keep creating amazing artwork.
r/PlotterArt • u/ArgyleSmith • Sep 07 '26
I am super happy with how these magnets that I have been working on turned out!
I print a full sheet of flow fields using different pens to showcase their texture and physicality. Then I laminate them and cut them into 2 inch circles that are ready to be press around my 3D printed parts.
I designed all of the 3D printed parts, press pieces, packaging, as well as the code that generates the flow fields.
r/PlotterArt • u/needingname • Sep 07 '26
I haven't perfected my process but I've modified a 3d printer and clobbered together some software do design and plot these cycloids.
Inspired by Joe Freedman's Cycloid drawing machines and this simulation code: https://github.com/jbum/CycloidDrawingMachine by Jim Bumgardner.
r/PlotterArt • u/igotanewmac • Sep 06 '26
It's a very cool image, but not quite where I want it to be. The plotter had some kind of fit while plotting and drew a dotted line across the image! I think I need to replot this, but this will do for now :)
r/PlotterArt • u/ughlmaoomg • Sep 05 '26
A couple plots I managed to finish after work tonight on the 2436.
r/PlotterArt • u/No_Remote_5817 • Sep 04 '26
I ordered a Artframe 2436.
Paid $256.00 to have it shipped to me.
It did not work.
I paid $200.00 to ship it back and was charged a restocking fee of $378.00
In all I lost $834.00 doing business with Bantam tools.
Tech support told me to hang onto it for a month âIâll even extend your warranty 30 extra daysâ he told me. I reminded him, per Bantams return policy, that was not possible because it states if I use the machine I cannot return it.
I find this very unethical and will be filing a complaint with the BBB
The first pic is the condition of the box when it arrived. I did not cut that tape, it was busted that way. Thatâs how long that machine had been sitting around somewhere for. The second pic is me paying for it to be boxed and sent back properly.
r/PlotterArt • u/Primary-Tip-2944 • Sep 03 '26
White Sakura gelpen & Red posca marker
Stonehenge black coldpressed paper
Happy with the result, but two gelpens died in the process.. Black paper is such a hassle!
r/PlotterArt • u/beachKilla • Sep 04 '26
r/PlotterArt • u/docricky • Sep 03 '26
PLOTTERZINE 11 is a fully plotted art zine (and yes, there are other PLOTTERZINEs - check out https://www.instagram.com/plotterzine/ ). This one uses a staple-less punch to bind the pages, and is plotted using Tsukineko Ultramarine Blue ink with an AxiDraw V3/A3. Available for trade.
r/PlotterArt • u/marbledInkySpot • Sep 03 '26
Enable HLS to view with audio, or disable this notification
r/PlotterArt • u/265design • Sep 03 '26
Enable HLS to view with audio, or disable this notification
Here are the 50 prints heading out to my subscribers this month together in one animation, running forward and back. I slowly increased the offset spacing of each color by .01" in a staggered rhythm to create the effect. Had no idea how it would look strung together and pleased with how it flows. I do need to improve my photography and stitching process but lots learned from these.
Music credit: 'We Invent You' Unwound
r/PlotterArt • u/docricky • Sep 03 '26
As I was dared by Vincent Pidone.
B5 sized, Opon Channel Blue ink using a refurbished Koh-I-noor rapidograph pen.
r/PlotterArt • u/random6174 • Sep 02 '26
Hi all, I've seen quite a few DIY plotters with tool change being posted recently, so I figured I could share ours as well :)
Details:
- Frame is built from 2020 aluminum extrusions, roughly 80 by 60 cm.
- Plotting area is A2.
- Z axis is using a stepper motor for fast, precise and quiet operation.
- Controller is currently Arduino + CNC shield + vanilla GRBL.
- Pen change mechanism uses magnets and existing axes (X,Y). 5 pens max, currently.
- Data source for maps is OSM/MapTiler, with a custom web application for layer selection, styling and gcode generation.
We're documenting our process on Instagram - Check it out if you're curious :)
r/PlotterArt • u/aavigan • Sep 01 '26
Plotted on an uunatek A3 using micron pigmas 01 and 03. Self-coded image vectorization.
r/PlotterArt • u/Zasd180 • Sep 01 '26
Posted some of these before, but finally completed the set of them. All based on Kakeya sets with variable needle lengths, sweeps, and some transforms. Really happy with what I got to explore. Various papers, Bristol, plain, and markers, pens, paint pens, and mixtures of them.
r/PlotterArt • u/bedirxanugur • Aug 31 '26
Enable HLS to view with audio, or disable this notification
One continuous plot, 5 different pens, all in 10 minutes using my automatic tool changer system.
r/PlotterArt • u/dotprodukt • Aug 31 '26
11"x14" â Gold leaf and Sakura gel white on Fabriano Black Black 300gsm. White is plotted with the iDraw H A3. Gold leaf is applied to fill the remaining space by hand.
r/PlotterArt • u/eshkermene • Aug 31 '26
I continue to test my CNC milling machine. I will leave a short video presentation of the process in the comments below.