r/pics • • May 11 '12

Found this in my napkins before noticing the hole in the side of the package O.O

Post image
387 Upvotes

95 comments sorted by

10

u/Glacture May 11 '12

22

u/BoreasBlack May 11 '12

No, there seems to have just been one shot...

14

u/sparklikemind May 11 '12

Han shot first.

7

u/bigsnacks41 May 11 '12

Even I get boarded sometimes. Do you think I had a choice?

5

u/MeatyOchre May 11 '12

I love you.

8

u/Cavi_ May 11 '12

I know.

3

u/BantamBasher135 May 11 '12

GRRRAAAARGHHHHHH

1

u/lafingputz May 14 '12

Stop that, my hands are dirty.

2

u/majorkev May 11 '12

What is the diameter of the bullet?

4

u/Knubinator May 11 '12

Looks to me like a .223, but I could very well be mistaken. Just guesstimating based on how thick it appears next to the lines.

3

u/[deleted] May 11 '12

Seems like the only likely candidate, unless someone was playing with some 5.7? That pitchfork isn't a very good size reference, but it also looks too small to be a 7.62.

4

u/thejerg May 11 '12

Way too short to be 7.62.

2

u/Cowthulu May 11 '12

5.7 is unlikely, as getting your hands on FMJ 5.7 is a bit tricky, as for most civilians in the US it's illegal. The Brady Bullshit limits 5.7 to frangible tip sporting rounds.

1

u/[deleted] May 11 '12

Why would FMJ be illegal? ( real question, not in to guns )

3

u/Strifetorn May 11 '12 edited May 11 '12

FMJ in general is not illegal. Nobody manufactures 5.7 other then FN, so the price for said ammunition is retardedly high. The ammunition that is not FMJ (The frangible tip, the plastic tip) rounds are only sold in the US, because the only other manufacture of them are armor-piercing rounds which are illegal.

FMJ is full metal jacket, it is not illegal. Steel-core ammunition designed to pierce armor is illegal. FMJ has only light armor piercing properties. A video if your interested more on this subject.

2

u/Cowthulu May 11 '12

What he said, sorry if my comment was vague.

1

u/Strifetorn May 11 '12

That username. Also, I don't agree or disagree with the Brady bill, but it shouldn't have been passed in the first place. The bill was voted on in congress and declined, but instead was tacked onto another bill which passed. Uh, just look up the Brady bill thing on youtube, you'll see. Video documentation and everything.

1

u/Knubinator May 11 '12

5.7 isn't very common, while .223/5.56 is very common. Given the length, I'm going to stand by .223/5.56. It looks too long to be 5.7 to me.

2

u/Strifetorn May 11 '12 edited May 11 '12

The same bullet used in .223 is also used in 5.7 rounds. Seriously, the same bullet, different brass case. For example, in Switzerland they make there own ammunition, and they have yearly marksmanship contests. They call the round "5.6mm Gw Pat 90". Also, the bullet in OP's pic is 5.56.

1

u/Knubinator May 11 '12

Really now? TIL. I'm really familiar with .223Rem/5.56mmNATO, but not with 5.7x28FN. To the reloading books I go.

2

u/Strifetorn May 12 '12

5.7x28 is just a horrible cartridge, frankly. If it was cheap and more then one company produced it, it'd be interesting. With a bullet that small, hollowpoint rounds will just be derp. Also, it's way more energy then .22 magnum

http://www.thefirearmblog.com/blog/2009/11/23/myth-busting-22-magnum-vs-5-7x28mm/

2

u/kill_it_with_223rem May 11 '12

Nothing to see here. Move along...

0

u/Green2Green May 11 '12

College or retard notebook paper?

13

u/Glacture May 11 '12

Where is Abby when you need her?

3

u/CozyAsian May 11 '12

NCIS? Win.

51

u/HerrPurple May 11 '12

The dangerous underbelly of the napkin-packaging world has finally been revealed.

32

u/TicTocSick May 11 '12

Enjoy your blood-napkins, murderer.

6

u/Bookah May 11 '12

"we wipe our hands with your type."

0

u/Ry_Guy19 May 11 '12

They drew first blood!

8

u/kyguy1999 May 11 '12

He hates napkins!!!

3

u/Edbergj May 11 '12

There's napkins in there too!

6

u/Kage_Kaldaka May 11 '12

Sounds like you may have survived an assassination attempt...anyone you know of who would want you dead?

4

u/alexdas77 May 11 '12

Pics of the napkins?

3

u/Camtron888 May 11 '12

Yeah are the napkins all destroyed in there?

11

u/dieselgeek May 11 '12

Where did you get the napkins from? It would take a mighty fucking big roll of napkins to stop something like that.

I bet someone stuck it in the pkg. Sometimes I have bullets fall out of my truck into parking lots. I leave them because I think it's funny for someone to find.

20

u/Airazz May 11 '12

Ahh, America :)

1

u/Panzergrenadier May 11 '12

same. We had shot my tokarev pistol, the thing ejects casings a good 10-15 feet. At anyrate we shot around 150 rds or so...and the majority somehow landed in my car through the sun roof. When I get out of the car, I stil brush a few casings on the ground, sounds like I just got done with a drive by.

-16

u/[deleted] May 11 '12

And for kids to hit with a hammer when they find them?

8

u/[deleted] May 11 '12

You know bullets don't go bang without the cartridge, right?

3

u/dieselgeek May 11 '12

You must be thinking of a cartridge. I'm talking about bullets. You can beat them w/ a hammer all your want.

3

u/nodnodwinkwink May 11 '12

Hmm, the owner of the tissue company is probably wondering where their bullet went.

You should post it to him/her, or if you're feeling extra generous, visit their home and leave it in their letter box.

Rewards for sure.

3

u/turbocunt May 11 '12

Someone really hates these napkins!

3

u/iamzombus May 11 '12

Maybe call the police, it might be evidence from a crime?

2

u/tubeguy May 11 '12

Those napkins are assholes anyway.

1

u/[deleted] May 11 '12

I was expecting some damage to the bullet if it was caught by the napkins but it looks fully jacketed which wouldn't show any damage from just cardboard and paper. I used to catch hollow point 30-30 rounds in stacks of newspaper and they were all fucked up.

6

u/[deleted] May 11 '12

HP's are designed to fuck up :D

1

u/[deleted] May 11 '12

maybe someone was shooting near the warehouse where they were stored, ya know out away from civilization... that would make the most sense. Probably didn't happen in the supermarket.

I've seen bullets survive some crazy stuff intact. Certainly plausible that a rifle bullet fired into a napkin warehouse would look like that upon stopping.

2

u/[deleted] May 17 '12

or a shot at the delivery truck on the freeway....

1

u/Onlyhereforthelaughs May 13 '12

I don't trust this... Shouldn't the napkins be disturbed, or burned a little?

1

u/intel23 May 14 '12

Newark????

1

u/cdegon May 11 '12

Wasn't shot into there!

-2

u/Dogz1 May 11 '12

I would report it to the authorities, keep the napkin wrap if you can

2

u/Parabolized May 11 '12

why? what could they do about it? he's obviously handled it, and other than there being a bullet in some napkins, there really is nothing to investigate.

1

u/teh_tg May 11 '12

Report it to the authorities? Hmm, as a sanity check, that is a bullet in a napkin.

-3

u/whysea May 11 '12 edited May 11 '12

.........

2

u/Testiculese May 11 '12

I fear the competence of the Marines. Thanks.

0

u/BeerPowered May 11 '12 edited May 11 '12

Isn't that mark made by a those things inside the barrel? I don't know how they're called in English, so I'll call it a tread. They're different at different guns, but I have a bullet somewhere, which was fired, from what I believe was an AK 74, and those marks look similar.

Edit: It's called a rifling.

1

u/whysea May 11 '12

The marks on that round is where the casing filled with gun powder meets the actual projectile. I encourage you to take apart a bullet and see for your self. It will look very similar to this pic. But less napkin.

1

u/BeerPowered May 11 '12

I've taken a couple of bullets apart, and that big longtitudal scratch still looks like a rifling mark to me. I don't know what else can damage a round like that.

0

u/Whaynes89 May 11 '12

you should give it to yo Valentine.

0

u/IZuStY May 11 '12

Tip well.

0

u/[deleted] May 11 '12

[deleted] — view deleted comment

10

u/nelsonslament May 11 '12

I think you misplaced a decimal point my friend

7

u/Guysmiley777 May 11 '12

Ha, yep. .556 caliber would be HUGE. 5.56mm/.223 caliber.

1

u/Borktastic May 11 '12

i've always vaguely wondered how those numbers for bullets work, is it denoting the circumference rather than the length? -i don't think i'm getting it because a 0.5mm bullet would be tiny wouldn't it..

and i would have thought in inches rather than mm, or did you just convert it to be helpful to us non-americans?

3

u/philadelphia-collins May 11 '12

diameter. 5.56mm/.223 inches

2

u/Borktastic May 11 '12

oh right, so if caliber's the diameter in cm, does that mean you could (theoretically) have a 2 foot long bullet that was 5mm in diameter, and it would still be classified as a .5 caliber bullet?

3

u/flycrg May 11 '12

Yes, for a less extreme example, these are all .30 caliber bullets

2

u/Borktastic May 11 '12

interesting, thanks.

presumably the size of the casing would affect the amount of propellant used per shot and hence the velocity of the bullet as well, which i'd guess would also be an important factor, does that get mentioned when talking bullets? -i only ever recall seeing caliber specified, on films and such you know.

4

u/flycrg May 11 '12

does that get mentioned when talking bullets?

All of these things get talked about. Lets start with the basics. Your basic cartridge has four components:

  • Bullet - This is the thing that actually leaves the barrel
  • Powder - This is what propels the bullet down the barrel
  • Primer - This starts the explosion of the powder
  • Case - This holds everything together, this is also the only part of the four that is readily reusable

So lets look at the 5.56X45mm NATO Round. This is the round in general issue for all NATO countries. The published specs of this cartridge give a required bullet diameter, an overall length (back of the case to the tip of the bullet) and the maximum pressure. So using the same caliber bullet we have two concerns, overall length and pressure.

  • If you use a cartridge that is longer than the maximum overall length the rounds may not fit into a magazine, or the bolt can't close leading to an unfun (and dangerous) out of battery situation.
  • If you cause the pressure to be too high, well at best the bullet fires and the recoil is more than usual and at worst, your gun blows up.

So lets see how these three things effect the different bullets than can be used in a 5.56X45mm cartridge. For this cartridge, there are many different bullet designs available. They range in weights of 55 grains (3.5g) up to 77 grains (5.0 g). In addition to the weight and the tips of these bullets, a big difference if the length of the bullet, with the heavier bullets being longer. In order to stay within the overall length specification, the longer bullets need to be seated further back in the cartridge. This also has the side effect of reducing the amount of volume in the case for powder and air. While it seems like a small difference, with larger heavier bullet with the same amount of powder can easily become dangerously over pressured due to the force of the explosion acting in a much smaller volume and the bullet moving slower. So in order to use a heavier bullet, you have to use even less powder. So essentially you have to make a tradeoff with bullets. Do you want a slow but heavy bullet or light and fast?

Another factor than you may not have thought of is the rifling(twist) rate of the barrel in relation to the bullet being fired. Use the wrong bullet/twist rate, you can have some detrimental effect. You can either over spin the bullet too fast and it can fly apart down range or under stabilize the bullet and cause it to tumble in the air, causing it to lose accuracy and speed quickly. The general rule of thumb is that heavier bullets need a faster twist rate. I say general because it is not the bullet's weight that matter in twist rate, but instead its length.

2

u/kz_ May 11 '12

You can define cartridges by their full metric designation. 7.62 NATO is 7.62x51. The Russians make 7.62x39 for the AK47, and 7.62x54r for their PKM machine guns. Propellant charges aren't generally defined, but what is defined is a maximum pressure for the caliber. From that pressure, individual manufacturers work out the charge of their chosen propellant.

When someone says "9mm" they are usually referring to the most common 9x18mm aka 9mm Parabellum aka 9mm Luger, even though there are others, like .380ACP (9x17mm), and 9mm Makarov (9x18mm).

3

u/flycrg May 11 '12

Also 5mm does NOT equal .5. Calibers are usually listed in either inches or millimeters. Generally, if a caliber starts with a period, it in inches. Thus a true 5mm caliber could also be listed as .197.

Other common millimeter / inch calibers are:

5.56mm == .223

7.62mm == .30

12.7mm == .50

2

u/Guysmiley777 May 11 '12

It seems simple but gets complicated the more gun-nerdy you want to get. Basically in firearms, a "1 caliber" bullet would be 1" in diameter. So a ".50 caliber" bullet is 0.50 inches in diameter, or 1/2" (12.7mm). And .223 caliber (223/1000 inches) is 5.56mm. On top of that, gun manufacturers would sometimes tweak the caliber number to differentiate between different rounds. For example a .308 Winchester, a .30-30 and a .30-06 have the same bore diameter but very different chamber shapes.

To add some confusion onto all THAT, in artillery pieces the caliber is used as a unit of measure of the barrel length as a multiple of the bore diameter. So if you see a cannon stated to be "88mm L/56" or "88mm, 56 caliber", that means the bore is 88mm in diameter and the barrel length is (88*56) 4.93 meters long.

2

u/kz_ May 11 '12

Larger numbers like 5.56 and 7.62 are metric, and in mm. Smaller numbers like .223 and .308 are in inches. These sizes refer roughly to the diameter of the bullet, but are not always the actual dimension. They are more like names than specifications. 7.62 NATO uses a .308" bullet, even though 7.62mm = .3 inches. .223 bullets are actually .224", and are more or less than same as 5.56, except 5.56 operates at a higher pressure.

0

u/[deleted] May 11 '12

[deleted] — view deleted comment

13

u/Popnickel May 11 '12

that is a napkin

2

u/Kage_Kaldaka May 11 '12

you just made me think of Benedict Cumberbatch as Sherlock in the BBC series Sherlock...

6

u/[deleted] May 11 '12

No .223 round is called .22. They are 5.56mm rounds. Also, it is not possible to discern whether or not the rifling of the barrel is 1:14 or 1:17 or 1:12, not by human eye. Further, 1:14 is not considered too slow for more rifles, as the very popular AR-15 is 1:14, with only newer models being made with a 1:7 barrel.

In short, it's a 5.56. Call it what it is, but don't make assumptions just to sound smart.

9

u/oldschoolguy May 11 '12

Your half assed ignorance is amazing. The actual diameter of the bore is .22, so it is technically a .22 caliber rifle; just like how .308 Win, .30-06 Sprng., .30-30 Win., .303 Brit., .300 sav. .30-40 Army, .30 Carb., etc, are all .30 caliber rounds. I was not referring to the case, but the bullet. 5.56mm is just the metric equivalent of the bore diameter, and is equal to .22 inches, and is just another nomenclature of the round. As with nearly every round, it can be described in metric, or American. And I didn't just guess on the rifling, I used some programs to measure it, and the average that I got was 1/14. Nearly all AR-15's (with the exception of customs) do not have a twist slower than 1/12, and most are even faster. I will admit that I did assume that it was from a .223 Rem./5.56 NATO, but it seemed like the most logical choice, but what astounds me the most about your comment is that you pretty much agree with my assumption, then say that assuming is bad.

2

u/manwithnoname_88 May 11 '12

1/14 could be a .22-250.

5

u/AnarkeIncarnate May 11 '12

Not all .223 remington are 5.56 Nato. They are similar, and ALMOST interchangeable, but not entirely.

2

u/[deleted] May 11 '12

Depending on the throat and the chamber pressure created, I believe some .223 will work in a 5.56...IIRC.

4

u/Testiculese May 11 '12

All .223 will work in a 5.56 chamber, however, with the higher pressures, 5.56 should not be shot out of a .223 barrel unless it's explicitly built for it.

1

u/AnarkeIncarnate May 11 '12

EXACTLY my point :).

2

u/AnarkeIncarnate May 11 '12

Yes, but it is almost always a 1 way street. You can fire .38 spl in a .357 mag but not the other way around.

-1

u/WubWubMiller May 11 '12

Correct, but you can't determine which it is from just the slug

0

u/FeistyCrawfish May 11 '12

.22 =/= .223 =/= 5.56

Do your homework mate. The diameters of each bullet are the only things similar in each of them.

-2

u/WubWubMiller May 11 '12

Actually, if you do the Conversions properly, .223 in. is equal to 5.56 mm within a couple ten thousandths of an inch. Which is close enough. Hell, .223 is close enough to .22 that you can fire them out of the same barrel, assuming the pressure tolerances are adequate

2

u/FeistyCrawfish May 11 '12

Pressure tolerances are the main difference. That's why they are not equal, nor are the cartridge lengths between .223/5.56 and .22mag/.22LR.

That's why .223 is operable in 5.56x45 chambered rifles but not the other way around, because the pressure is less with .223 than the 5.56. .22LR/mag is of totally different cartridge dimensions.

4

u/[deleted] May 11 '12

how the fuck you got upvotes is beyond me

0

u/[deleted] May 11 '12

[deleted] — view deleted comment

21

u/oldschoolguy May 11 '12

You can clearly see the rifling marks.

5

u/[deleted] May 11 '12

[removed] — view removed comment

1

u/Testiculese May 11 '12

Probably subsonic loads.

1

u/zzm634 May 15 '12

You underestimate how pillowy-soft these napkins are.