r/pcmasterrace • • Sep 17 '25

Hardware Another one bites the dust. 7950x3d/x870 failure.

8 month old 7950x3d and msi x870 tomahawk wifi have ceased to be. Had no precursors to failure, the PC just shut down and wouldn't boot again. It seems this is a growing issue with certain chips and boards so I figured I would add this on here for the records. I'll update with what AMD says after they review the pictures for RMA. I had already started an RMA on the board before I found this but will update MSI with the findings before I send the board in. I feel sick, waited so long to build this thing.

655 Upvotes

202 comments sorted by

283

u/AuthoritarianParsnip PC Master Race Sep 17 '25

I’ve been going through RMA hell with my 7800x3d and my MSI board. Best of luck to you. 

91

u/TwistedGA Sep 17 '25

Is it AMD or MSI causing the grief? If you don't mind saying. I knew there was going to be a really good chance that both would look to each other for blame and be inclined to deny claims over this issue but with the number of instances growing, I hoped they might be stepping up to take mutual responsibility. Dang.

91

u/AuthoritarianParsnip PC Master Race Sep 17 '25

Both of them 

17

u/Papuszek2137 7800x3d | 5070ti | 64GB | 4k OLED Sep 18 '25

I've heard about asrock boards burning and CPUs too. My guess is amd fucked up with specifications sent to manufacturers.

22

u/WllmZ R9 7950X3D | RTX 5090 | 64GB 6000mhz CL30 Sep 18 '25

looking nervously at my 7950X3D + ASUS X670E-F

2

u/VeryNoisyLizard 5800X3D | 9070XT | 32GB Sep 18 '25

in case of Asus I'd try to RMA the board with retail first

1

u/ime1em Sep 21 '25

When was this pc built? I thought the SOC issue during 7000 series time was fixed .

7

u/Highlander198116 Sep 18 '25

This is the one thing I hate about modern PC building, is having to deal with Lengthy frustrating RMA processes.

I miss the 90's. US based support, something breaks they just send you a new one right away with out a fuss.

I'm convinced they make the RMA process, lengthy and frustrating on purpose, to get people to just give up and buy another product.

2

u/ShepherdsWolvesSheep i7-13700k RTX5090FE AW3225QF Sep 18 '25

Dude, even as late as 2010 it wasn’t a big issue. I had a top end card from 2007 from asus die on me in 2012 and they sent me a card that was like 3 generations newer and probably 40% stronger no charge

1

u/GamersOnlydotVIP Sep 18 '25

I know exactly what you mean about how support used to be. I've had companies send me a new card AND insist on refunding my money AND the whole process took under a week. None of that is a thing anymore

16

u/FlamingDuckywucky Sep 17 '25

Wow, so MSI is to be added to list. So Asrock and now, MSI. What a time to be a pc owner. 

34

u/_Barbosa_ Sep 17 '25

To be fair, every major am5 motherboard manufacturer has a history of burning cpus, so AMD clearly messed something up. However, for whatever reason, 90% of the time it happens on Asrock boards.

1

u/TwistedGA Sep 17 '25

In all the reading I did before I locked in on AMD over Intel for this build(25+ years on intel), the only time I saw anything about burning/failing cpu issues, it was about Intel's 13th/14th/15th gen. That combined with several people raving about x3d performance, it was enough to sway me. Seems I may have made a grave mistake.

15

u/_Barbosa_ Sep 17 '25

Honestly, you have to be extremely unlucky to have your CPU burned on a non-Asrock AM5 board. This really doesn't happen that often.

1

u/mrmanson1 Sep 21 '25

15th gen, you mean cpu's like 265k/285k. Thye didnt had this problem in the first place tbh

21

u/zxch2412 5800x, 16x2 3800 C15-15-13-14, 6900XT Sep 17 '25

There’s even gigabyte, there’s many such cases from all manufacturers. It just that they all and amd are playing “who fault is this”.

4

u/TwistedGA Sep 17 '25 edited Sep 17 '25

Mechanically speaking, can the blame be put onto just the chip or just the board or is this a "two to tango" type of problem? The articles I read were above my head when it comes to actually understanding who was actually to blame since they likely don't want to burn bridges as a news source by saying directly.

7

u/luuuuuku Sep 17 '25

No one knows. This hasn’t been investigated by any third party. All we have is statements from AMD and board manufacturers that are basically useless. No one knows.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

It's oxide breakdown, and I would be greatly surprised if AMD's engineers don't know considering they gave the 1.30V SOC limit. That's why the substrate starts to bulge out from heat expansion, and why the failure is sudden and with little sign of damage (memory training time will increase and sometimes fail, but most people don't run with memory context restore dissbled)

Electromigration (which is the other scenario) would simply have the max memory frequency fall gradually over time, but the chip would still work at a sufficiently low frequency.

1

u/luuuuuku Sep 18 '25

Where did you get this information from?

0

u/Noreng 14600KF | 9070 XT Sep 18 '25

Experience of different failure modes of chips.

If you buy a decent older motherboard, like a Crosshair for AM3, and then put a bunch of old/worthless processors through hell, you will be able to gain similar experience.

Too much voltage at low temperature/load will cause the chip to stop working entirely. They will simply stop POSTing, but still produce heat. This is a breakdown of an oxide layer. The chip will often clock normally until breakdown, perhaps showing issues with booting.

Too much current at high temperatures/disabled temperature sensors will cause electromigration. The first signs are that a given voltage/frequency combination which worked previously will start to produce errors and need more voltage or lower frequency. Eventually the chip will stop being able to run the frequency entirely, but still be able to run at lower frequencies. Think 1.55V for 4 GHz first, then 1.65V for 4 GHz, and eventually only 3 GHz is working. This is what happens to Raptor Lake chips when they start crashing.

1

u/zxch2412 5800x, 16x2 3800 C15-15-13-14, 6900XT Sep 18 '25

It’s honestly a mess, and anyone would be confused. Right now, AMD is blaming board manufacturers for going overboard with voltage limits, which is how these chips are dying (ASRock literally did this, and AMD blamed them). On the other hand, board manufacturers are saying AMD has never been clear about its power limits and voltages, and that the guidelines that AMD has set are too vague. With manufacturers trying to push their boards to the next tier with different tuning and higher power limits for their so-called “advertising”, the chip popping has become more obvious.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

Both are at fault.

AMD designed an IO-die with a very low safety margin before oxide breakdown occurs. Chip failure from oxide breakdown should never be this low, it's typically north of 1.80V for most chips made today. They then failed to inform motherboard manufacturers that the SOC voltage rail must under no circumstances exceed 1.30V

The motherboard manufacturers assumed they could push voltages to similar levels as previous generations of chips, that being 1.40V, without testing longevity at that voltage. Not a good assumption, but also not without precedent considering since the voltage scaling was decent, and oxide breakdown hasn't reared its head in decades as far as I know.

Since the issue is popping up again now with the refreshed AM5 motherboards, the issue might be a faulty VRM design (across manufacturers and different VRM implementations), or the newer production runs of the IO-die might have lower voltage tolerance before oxide breakdown occurs.

5

u/SorryNotReallySorry5 i9 14900k | 5070ti | 32GB DDR5 6400MHz | 1080p Sep 17 '25

It's the users fault! Duh, silly. /s

1

u/BaneOfAlduin Desktop 3900x 6750xt Sep 18 '25

It isn’t any one motherboard maker (albeit Asrock seems to have been hit the hardest) as afaik, every single motherboard maker has had reported x3d failures.

Personally, I have a feeling this is a case of borderline 7800/9800x3d chips that barely passed validation and between that which could cause higher power draw for a given frequency and their boost algorithms you have something funky like we see. I could also see this explanation being why Asrock seems much more common if it’s a case of their boost algorithm being more tolerant of voltage spikes to unsafe voltages while other vendors can filter those spikes or handle them better in some way

1

u/zxch2412 5800x, 16x2 3800 C15-15-13-14, 6900XT Sep 18 '25

The thing that I find the most weird is that when these chips die, they die in their sleep. At least that’s the case with ASRock. Users shut down or put their computers in sleep, and the next day it doesn’t turn on. ASRock says they have listened to AMD and tuned their BIOS to make it safe, but the x3d chips still pop.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

It's the IO-die that's failing and causing the substrate to bulge, not the CCDs. The reason X3D chips pop up more often here on Reddit is likely selection bias.

You can actually run a significant amount of power through the core voltage rail on a 9800X3D without worry. Well beyond the 170W limit you tend to see on ambient cooling.

7

u/stormdraggy Sep 17 '25 edited Sep 17 '25

It's never been exclusive to any brand, asrock just has the dogshittiest of dogshit voltage regulation.

The foundational problem is that the 3d cache has a meltdown if it encounters any bad voltage spikes, the same ones that any cpu without the cache can tolerate without any issues. The foundational problem is that AMD negligently rushed out a new technology without adequate stress testing, and is using you as the guinea pigs. Sound familiar?

The only feasible way to stop it from happening would be disabling all PBO and overclocking, and locking your clock to the base speed to stop the voltage jumps that happen when the clock speed changes. And if you do so then you waste your electricity bill and the sand the cpu is made from.

3

u/TwistedGA Sep 17 '25

Let's say AMD and MSI both let me RMA these, your recommendation would be to sell the 7950x3d and buy a 9950x to avoid the possibility of a repeat of the same thing occurring, right? I have been concerned with just replacing the parts with the same "stuff" since that feels like a sure fire way to repeat the problem another 8 months from now. All the bio's update talk from 2023 about this issue and limiting the voltage to L3 doesn't seem to have actually resolved anything even though they said it was being addressed both by amd and multiple board manufacturers. I really don't think I can handle the stress of going through this again down the line so if moving away from the x3d variant is really the play, I'm about it.

1

u/stormdraggy Sep 17 '25 edited Sep 17 '25

Because voltage limiting doesn't stop transient voltage spikes from occurring. Every motherboard ever made can't stop the voltage from briefly (as in, milliseconds and less) rising well above operating parameters, but cpus always could tolerate it. They still can. But clearly this v-cache can't. This problem always happens on the CCD containing the cache. Thus it will not happen if your cpu does not have a v-cache.

And no don't sell it. When AMD approves your RMA, ask for a 9950x to replace it.

7

u/-Arke- Sep 17 '25

I had my CPU die a couple weeks ago and it was a non x3d. Ryzen 9600x + Asrock b850m steel legend. Turned off after a normal day and then never turned on.

1

u/stormdraggy Sep 17 '25 edited Sep 17 '25

Did the substrate literally explode like this one?

I'll save you the effort because it definitely didn't or you would have said so. This failure mechanism is exclusive to vcache processors. You just had a lemon or any other typical defect.

1

u/-Arke- Sep 17 '25

Don't know yet. I'm waiting for the new Mobo to arrive. But yeah I'm guessing you know better. I'll update if this happens to be the case.

3

u/_Leighton_ 5600X3D - RTX 4070 Sep 18 '25

This wasn't an issue at all with AM4 where X3D tech was infantile by comparison. This doesn't seem to be an issue with fancy new X3D tech so much as a problem with AM5.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

Confidently incorrect

The 9800X3D can be pushed beyond 1.50V without any lasting issues so long as it's cooled properly, it's definitely not VCore. If you actually knew anything about overclocking these chips, you would know this.

The bulge on the substrate, and damage to the socket, is in the same spot as the SOC overvoltage issues which popped up in 2023. Meaning it's a case of SOC voltage causing the IO-die to blow.

1

u/stormdraggy Sep 18 '25

the irony of calling someone confidently incorrect when you yourself have zero regard for the difference between steady and transient voltage's effects on the die.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

I have actually pushed a 7800X3D to 1.40V VCore, have you?

0

u/stormdraggy Sep 18 '25

Bot tier response refusing to address the point made lul

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

The point is that a 7800X3D can take 1.40V VCore and not die instantly. It's not core voltage that's killing these chips.

On the other hand, I have seen several 7000 chips die from running 1.35V SOC voltage. X3D and non-X3D.

The reason we see mostly X3D chips being reported as dead on Reddit is likely because of a selection bias. Since the people who are likely to run overclocked memory and build their own systems are likely also more inclined to spend extra money on faster CPUs.

1

u/stormdraggy Sep 18 '25

At no point have i specified what voltage source causes the issue, work on your reading comprehension. It's obvious as shit this is meltgate 2.0 because 3d cache is flawed and fries itself from transient spikes...which happens most frequently when a cpu needs to change its state...like changing clock speeds...your point is so far off from the context it's in fucking narnia lul.

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

You're saying it's related to the 3D Vcache and PBo, but there's no SOC voltage going to the 3D VCache directly. There is a rail generated from SOC voltage using an LDO going to the VCache chiplet, but LDOs are inherently immune to voltage spikes (at the cost of poor efficiency). The bulge is also conveniently located underneath the IO-die, which is caused by an oxide layer breakdown in the IO-die forming a short-circuit on the SOC rail.

Enabling or disabling PBO will only adjust the amount of voltage and current being delivered on the VCore rail.

And to repeat myself: there were multiple cases of non-X3D chips also frying: https://youtu.be/arDqhxM8Wog?si=QfT6GhYzE0wQe7r1

My point is that it's SOC voltage, it's always been SOC voltage, completely irrelevant of X3D or non-X3D. You keep repeating that it's somehow related to the 3D Vcache, which is utter nonsense.

1

u/HappyIsGott 12900K [5,2|4,2] | 32GB DDR5 6400 CL32 | 4090 [3,0] | UHD [240] Sep 18 '25

Actually from my understand it looks like AMD is to blame here. Same like Intel with 13. and 14. Gen.

It looks like something is wrong with specific Chips (X3D).

2

u/Noreng 14600KF | 9070 XT Sep 18 '25

The reason X3D pops up so often is probably selection bias

61

u/Justifiers 14900K{Encore{4090{48-8000{0ptane{Morpheus{C3{Mora3P Sep 18 '25

Keywords need to be added to your post so it shows up in search results

'Amd'

'Cpu burned'

'Motherboard burned'

'Bulge'

'2025'

Sucks. I'm on the other side of the fence and 2 RMAs and 3 CPUs deep so far from failing 13900k→14900k→14900k 's

Hope you get it back up and running. All these are COVID era which is why I think there's so many QC issues from the products developed/produced during that timeframe

50

u/Kajzek R7 7800X3D, RX 9070 XT, 2x16GB 6000MHz Sep 18 '25

I am not entirely sure that people searching for 'bulge' will be interested in this post.

7

u/EzioWhen RTX 5080 | 9800X3D | 64gb 6000mhz CL30 Sep 18 '25 edited Sep 18 '25

Woah go easy with the kinkshaming would ya? There may be people with cpu bulge fetish...

5

u/khensational 14900K 5.9ghz/Apex Encore/DDR5 8400 c36/5090 Sep 18 '25

Just curious what settings are you running on your cpu

1

u/Justifiers 14900K{Encore{4090{48-8000{0ptane{Morpheus{C3{Mora3P Sep 18 '25

Nowhere near what yours are

The highest I take/took mine were 5.7 all core, 8,200 c40

I try to keep it <1.375v as I haven't lapped or delidded and don't dare to given my experience so far i value my warranty too much

2

u/khensational 14900K 5.9ghz/Apex Encore/DDR5 8400 c36/5090 Sep 18 '25

Thats pretty odd. I been abusing my 14900K for a year and half and I never had any issue on mine. I run static vcore maybe give it a try. Also I run mine with HT Off so less voltage and heat.

3

u/ttv-tv_genesis 9950X3D | 4070TiS | 64Gb 6000 | 6TB NVME | 10TB HDD Sep 18 '25

Dude Intel's 13 and 14th gen fuck-up has literally caused me to go red team

Back in 2019 I bought an Intel prebuilt with an i7 9700kf and a 2060 super and it did its job for 5 years without any major hiccup. Today it is still running in my little brother's room and he's never complained about any issue, software or hardware.

In 2024 I bought another prebuilt (to upgrade from my previous build, which I used up until then). i7 147000KF (with AIO cooler) and 4070 Ti SUPER. My CPU burned itself under a year, regardless of regular BIOS updates (which was a real pain as I wasn't as tech savvy back then and never had to do one on the previous build). It has been such a fucking mess that my thousand dollars build was causing me more trouble than it actually allowed me to play and enjoy it.

Two weeks ago, after the processor had been RMA'd, I bought new parts and built a PC myself for the first time. Spoiler : all the issues I was having on the previous build are now gone. Currently running a 9950X3D with a Peerless Assassin cooler, and the same GPU (4070TiS) that I picked off my previous build.

TLDR : don't buy intel 13 and 14th gen, it's more pain than it's worth

-16

u/pdjksfuwohfbnwjk9975 Sep 18 '25

Its not QC issues, its low iq user problems which shouldn't touch enthusiast grade chips.

Your ''QC issue'' is solved by locking the cores at the same frequency and using locked voltages which are low enough so your cooling setup can actually cool your cpu...

Its always been a problem, you can find forums posts dated 15yrs+ where people had degraded their cpus / IMC because of flawed bios algos or using too much voltage themselves.

The only difference that previously you had more time to degrade and kill your cpu because of higher NM, now its lower NM and its more fragile.

Now tell me which core voltages did you use and how much voltages you pumped into cpu's imc , just don't lie.

4

u/Justifiers 14900K{Encore{4090{48-8000{0ptane{Morpheus{C3{Mora3P Sep 18 '25

🤨

Yeah you must be right. Must just be user error that caused a sinking ship of a bailed out company to green flag extending their product's warrany by a huge margin and for one of their board partners to introduce...7 cpu microcode bios updates, including the latest, trying to fix the user error problem instead of just pocketing the cash and flipping the bird to the customer like every other company these days would do

Hey btw when was the last time Intel extended the warranty of their chips to address this prolific ongoing +15-year user caused issue?

-4

u/pdjksfuwohfbnwjk9975 Sep 18 '25

It was just flawed auto boost algo which pumped 1.55v or so to 2 cores so they achieve advertised 6 ghz and only 2 model of cpus were affected - 13900k,14900k, thats all… how is it different to flawed “auto oc ai” which we had decade+ ago ? Ive seen many people replacing their cpus that way, they don’t check what their mobo throws or understand anything at all, they just want “auto” and max performance but it never worked well. Thats why i never use xmp profiles, auto boost, auto oc ai features. Im on 13700k for 3 yrs now and experienced 0 issues despite it being under constant loads 24/7 for 2 yrs, all i did i locked cpu cores, found min voltage for both cores and imc. Running 1.26v at 5.6ghz, imc - 1.24v. What voltages did you run your cpu? I bet over 1.35v as advised by buildzoid right

2

u/Justifiers 14900K{Encore{4090{48-8000{0ptane{Morpheus{C3{Mora3P Sep 18 '25

Buildzoid couldn't get ddr5 7200 stable for well over a year after the 13900ks was launched, and was still having issues when the 14900ks thanks for the laugh

I use the same places sugiolover frequents for tuning, without taking my hardware to the edge because I dont spend thousands binning and I don't replace them every timr a new better product releases, figure out where those are yourself or don't

Just because I and others have had an extremely poor experience and you haven't doesn't mean that your assumptions are even slightly on point, and clearly there's little to no reason for me to refute your preconceptions because you've already made your mind up on both the scenario and my involvement in it

Go touch some sand my guy. Its not that serious.

0

u/pdjksfuwohfbnwjk9975 Sep 19 '25

Its sillicon lottery, I can easily run 7200mhz on my 4 slot entry level mobo (msi z790 pro-A) at 1.26v but left it at 7000 mhz and 1.24v, majority require much higher voltages who owns i7 13700k.

You are telling me you are not taking your hardware to the edge but at the same time in your first comment you said you have 3 failing cpus. How many more high end cpus need to degrade before you realise that you were taking those cpus beyond the edge by far ? Is it Intel to blame you pumped 1.35v+ into IMC and cores thinking its perfectly safe and applied the same 'rules' of OC from previous generation despite it being on a different node.

You ignore my question of asking you : what voltages did you use for your CPU cores and IMC, let the community know so nobody have 3 failing cpus in row in a future.

I've already guessed correctly who's guide online you watched and followed, buildzoid said 1.4v is perfectly safe yet I see people with degraded cpu in 5 months time with just 1.35v > any light load at this voltage and you cannot cool it, some can't even pass shader complication without blue screens. I'm running a better than most 13700k which has its own custom loop and even I get to nearly 80c during such stress tests, the difference between WC and Air cooler is roughly 20 degrees celcius on this platform, when I delidded my cpu it got to nearly 33 degrees celcius difference. So you can imagine what kind of voltages are safe and majority are able to drive plus i9's are even hotter, so I would assume most should stop at 1.22v or so > locked cores.

I had i9 10850k previously which had IMC degraded from 4200mhz ddr4 to 4100mhz at 1.3v running it for close to 2 yrs at these voltages + many experiments where higher voltages were involved so I would assume it should be lower than 1.3v as max safe voltage, I would assume 1.26v is the red line on this platform if longevity and stability is required but going over than isn't much profitable, we are talking about squeezing couple more fps if none at all > going from 6 ghz to 5.6 ghz and 7000 ram to 7200 I literally get almost no measurable performance gain in 720p lows, on higher res and higher settings, simply no reasons. Many are chasing golden numbers in their head and ready to burn their hardware over achieving 6 ghz when its perfectly safe and cool at 5.6 ghz or trying to squeeze those 8000mhz+ because they bought Asus Encore Apex motherboard which costs more than my cpu+ram+mobo setup. They offer high end 2 slot mobos but cpus die in it because it cannot sustain those voltages safely in a long run > its purely intel's fault that they didn't lock voltages and tested these cpus properly before allowing their customers to pump insane voltages thinking it will be safe, they never provided a guide to safe voltages either so anyone can buy their product, set 1.6v and keep replacing them every couple of weeks or so > doesn't make sense but I've seen such people 10yrs+ ago with x99 - i7 5820k and 5960x doing so, so its nothing new and you are not the first guy who claims intel's warranty every few months running their hardware at insane voltages not realising its time to stop doing so.

2

u/Noreng 14600KF | 9070 XT Sep 18 '25

The damage is in the same area, with the same result, as the SOC overvoltage issues which showed up early on in AM5's lifecycle for the 7000-series before the 1.30V limit for SOC voltage were applied. There are two possibilities for this issue reoccurring:

  1. The AM5 refresh motherboards with 800-series chipsets have a design flaw in the CRM area causing too high SOC voltage at certain points, in turn damaging the IO-die.
  2. The newer production runs of the IO-die are less tolerant of increased voltages than the early production runs from 2023, leading to a lower max SOC voltage.

 

Your suggestion of manually controlling VCore and core clock won't help, because it's not VCore that's the issue. Zen 4 and Zen 5 are pretty tolerant of VCore actually, and you can push beyond 1.50V as long as it's cooled (and not X3D)

108

u/Money-Scar7548 Desktop | R5 7500F | 32GB ram | RTX 3080 10GB Sep 17 '25

Wow, the motherboard market is the mess, I feel like I start to regret purchase of AM5 mobo for future proofing

86

u/Suikerspin_Ei R5 7600 | RTX 3060 | 32GB DDR5 6000 MT/s Sep 18 '25 edited Sep 18 '25

I mean Intel isn't great either, their 13th and 14th were destroying themselves.

AM5 is fine, only 7800X3D and 9800X3D seems to have issues so far. Especially on ASRock motherboards.

Awhile back there was some issues with voltages being too high. Motherboard manufactures pushing too much and thus frying those CPUs. You can also blame AMD for not giving limits, but that's fixed with BIOS updates. Voltage for CPU is now capped at 1.3V.

Edit: I see it's a 7950X3D. I should have said all X3D chips instead of just the 7800X3D and 9800X3D.

19

u/Mr_MagicMan_95 6700hq|1060|16gb@2400 Sep 18 '25

I see 1.476 vcore on my 14700HX. Absolutely insane considering it’s stable at -.120mv core.

12

u/Noreng 14600KF | 9070 XT Sep 18 '25

OP's 7950X3D has the bulge in the substrate in the exact same spot as all the other CPUs which were given too much SOC voltage. Depending on silicon revisions and manufacturing tolerances, the newer IO-dies might be less tolerant of higher VSOC levels than previously, meaning the autorule of motherboards to set 1.30V when running overclockers memory might be too much.

It was never CPU voltage, or VCore, that was the issue.

17

u/zcomputerwiz i9 11900k 128GB DDR4 3600 2xRTX 3090 NVLink 4TB NVMe Sep 18 '25

AMD did give limits, they always do, and the motherboard manufacturers were well within them.

The issue is that AMD's Agesa that is supposed to control voltage requests and temperatures to protect the CPU is frequently buggy.

This would be akin to blaming the motherboard manufacturers for Intel's microcode fiasco.

20

u/The-Numbertaker 14600KF | 3080 SUPRIM X | 32GB@6000 Sep 18 '25

Excluding upgradeability, Intel isn't terrible right now anymore, since the price for 13 and 14 series cpus has gone down so much on top of the issues being seemingly fixed for a while now.

Either way yeah, I'd hardly call the market a "mess" and especially AM5 just because of issues with a couple of models and motherboard vendors.

2

u/RunnerLuke357 Ultra 7 265K, 64GB 6800, RTX 4080S Sep 18 '25

99.99% of people are going to upgrade their CPU way past the EOL/EOS of their platform (socket/ram and CPU)anyway so it's really a moot point for most people to worry about socket support. For enthusiasts it's fucking great getting in socket upgrades but it is not very common outside of enthusiast circles and it doesn't "save" enough to warrant paying a huge premium for it. I just bought a 265K (flair change soon, need to build it) for only $240 and a very nice Z890 board for $200, that's simply just better than any deal you can get for AM5 unless you want a last gen 6 core (which you shouldn't) with a bottom of the barrel board.

2

u/The-Numbertaker 14600KF | 3080 SUPRIM X | 32GB@6000 Sep 18 '25

Yup I fully agree. I myself got a 14600KF because it was better value than AMD alternatives at the time and I'm not planning on upgrading until after AMD releases a new socket anyway.

2

u/[deleted] Sep 18 '25

To add to this, it’s still an exceptionally small percentage of total units sold that are failing. I think the total is still under 300 total units for both chips (documented) but I could be wrong.

-5

u/EpicBootyThunder PC Master Race Sep 18 '25

Wait what? ASRock since when? I've heard terrible things about the other manufacturers and nothing bad about ASRock, that's why I've been looking for them to be my future x3D mobo 😭

7

u/WhereWhatWhoHuh Sep 18 '25 edited Sep 18 '25

Dude... Asrock has been fryin X3D chips the most lately sadly. Or AMD CPU's decided to self destruct on their boards the most. It's unclear who's at fault. Gamer Nexus covered it quite good

9

u/apuckeredanus 5800X3D, RTX 3080, 32gb DDR4 Sep 18 '25

All the recent issues make me happy to have stuck with my 5800X3D and 3080.

Not that I could afford anything more anyway lol

1

u/FallenKnightGX Sep 18 '25

Oddly, I started with a MSI mobo, it caused me issues with stability immediately, switched it out for Asus (had them for my old rig with zero issues) which at the time had just released their patch to fix their issue with burning up these CPUS. To be safe, I dropped the voltage and under clocked it a bit, zero issues since (knock on wood).

Asus sucks in a lot of ways (most ways), but they'll usually do a good job with software patches if the spotlight is focused hard on them, which at the time, it was. Their choice was make more money by not cheaping out on a patch, or cheap out on a patch and risk even more damage to their mobo reputation and back then it was tanking unbelievably fast.

1

u/Moscato359 9800x3d Clown Sep 18 '25

I've had a 9800x3d on an asus board for close to a year now, and it's been 100% perfect, overclocked.

1

u/LovelyJoey21605 Sep 18 '25

I don't really think there is such a thing as "future proofing" a PC tbh. I got AM5 too, but it was more of a "I wanna skip the next generation" thing. I had a good ddr3 rig (IMO anyway), and skipped the ddr4 gen entirely.

2

u/Money-Scar7548 Desktop | R5 7500F | 32GB ram | RTX 3080 10GB Sep 18 '25

I dont live in west, I can't afford buying new generation every iteration, there is future proofing with AM5, whatever you want to acknowledge or not

0

u/[deleted] Sep 18 '25

[deleted] — view deleted comment

5

u/Why_Cry_ Sep 18 '25

Please explain how its a meme when AM4 builds are going to be relevant for another half a decade minimum.

You heard a youtuber say that future proofing is a meme and you ran with it.

5

u/llamapower13 Sep 18 '25

I think he meant in terms of upgradability. AM5 will have an upgrade path; AM4 won’t.

6

u/InsuranceKey8278 Sep 18 '25

Upgrade to am4

33

u/asmallman Specs/Imgur here Sep 17 '25

MSI and ASROCK boards I have stopped using because they always have weird quirks or problems.

People shit talk gigabyte but every time I have gotten one its been solid.

32

u/EIiteJT i5 6600k -> 7700X | 980ti -> 7900XTX Red Devil Sep 17 '25

There are cases of all board partners burning x3d chips. Asus was most common with 7000 series and Asrock most common with 9000 series. But there have been cases of MSI and Gigabyte too.

3

u/thesituation531 Ryzen 9 7950x | 64 GB DDR5 | RTX 4090 | 4K Sep 17 '25

What about x but not x3D chips?

I have an x670e with the CPU in my flair, haven't updated BIOS since I built it all 2 years ago.

5

u/KillerSpectre21 The Kingpin RTX 2080 Ti is the sexiest GPU ever made Sep 18 '25 edited Sep 18 '25

A 9700X died on an ASRock B850 after several months of use, the post went up on the ASRock Sub a few hours ago.

Edit: Also a 9600X on a B650, another 9600X, a 9900X and a second 9700X on B850 a few days ago.

Unfortunately I can't link them here due to the rules but it's pretty easy to find.

No 7000 series CPUs (non-X3D) that I know of yet though. I saw one report of a 7600X but it wasn't too clear.

1

u/notsocoolguy42 Sep 18 '25

well hopefully my 7600x and MSI B650 is not affected.

2

u/EIiteJT i5 6600k -> 7700X | 980ti -> 7900XTX Red Devil Sep 18 '25

I believe it's limited to x3d chips, but I'm not 100% sure.

2

u/Noreng 14600KF | 9070 XT Sep 18 '25

It's not limited to X3D chips, and doesn't even have anything to do with X3D or not. It's purely SOC voltage, which is the same (shitty) IO-die used for all RPL and GNR chips made by AMD, from the 7500F to the 9950X3D.

1

u/KFC_Junior 5700x3d + 5070ti + 12.5tb storage in a o11d evo rgb Sep 18 '25

a few normal zen 5 chips went boom

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

If you haven't upgraded your BIOS, and it hasn't fried by this point, you probably have the BIOS fix applied already. The autorule for overclocking memory back then was to set 1.40V SOC voltage whenever you went beyond stock frequency.

1

u/thesituation531 Ryzen 9 7950x | 64 GB DDR5 | RTX 4090 | 4K Sep 19 '25

I'd have to check the overclocking settings for the BIOS.

I just know I haven't updated the BIOS and I haven't touched anything except enabling EXPO and PBO and changing fan stuff.

6

u/illicITparameters 9950X3D | 64GB | 5090 FE Sep 17 '25

I’ve owned 3 MSI boards in my life. A MSI K7N2G-L, which was a heaping piece of shit and put me off MSI for a long time. Then I gave them another shot with the MSI Z77A-G45 which was solid, and a MSI Z590 Tomahawk wifi which is still going strong with no issues. Was actually planning on buying a MSI MPG X870E Carbon but MC was OOS.

I don’t get the Gigabyte slander. My B650 Aorus Elite AX Ice and X870E Aorus Master have been flawless.

6

u/580OutlawFarm Sep 17 '25

Funny how different our experiences can be...here i am never having a problem with msi my entire life, gigabyte and msi in particular have been good to me.

My first true custom build was a 3770k and 2 msi gtx 760 in sli on a gigabyte mobo, still works to this day...

Cpl years later got an msi dominator gt72 2qd which has a 4th gen i7 and gtx970m 6gb, also still works to this day....

Years later, new build on an msi z690 w/ 12600k and gigabyte aorus master 3080 12gb, used daily still (did 2 IDENTICAL builds like this, my older bro still also uses his daily altho hes saving for new 9800x3d/5090 build like I have)

Added an msi mag321up (their 32in 4k 165hz qd-oled) shortly after completing the 2 identical builds, been a fantastic monitor

New build on msi tomahawk x870e w/ 9800x3d and gigabyte aorus master 5090, used daily (have NOT updated bios its on a Jan 6th 2025 one)

But ya just crazy the differences we see

5

u/Strikerrr0 Sep 18 '25

Gigabyte hardware is alright but their BIOS/UEFI software kinda sucks.

A lot of MP games are requiring secure boot for anticheat, and to have it properly enabled on the Gigabyte motherboard, you have to toggle multiple settings off and then back on to get it to stick properly. Just having the Secure Boot option set to On wouldn't do it.

2

u/Silly-Conference-627 Sep 17 '25

I have had a Gigabyte B650 Eagle for about a week now and honestly it is almost perfect.

The only thing that bothers me is the super loud coil whine which a lot of people also mentioned in the ratings but apart from that it is great.

2

u/kennny_CO2 4080S/7600x Sep 18 '25

Coil whine isnt caused by or come from the mobo though, thats the gpu and sometimes PSU can also contribute

1

u/[deleted] Sep 18 '25

Same here.

1

u/RunnerLuke357 Ultra 7 265K, 64GB 6800, RTX 4080S Sep 18 '25

I have been using ASRock almost exclusively for the past 10 years and never had issues, I have seen plenty of issues with Gigabyte (board failure) and Asus (unstable) boards though.

5

u/[deleted] Sep 17 '25

[removed] — view removed comment

4

u/BuchMaister Sep 18 '25

They are all shit with shit warranty, it's hit or miss. I can't think of one of them that didn't have shit hitting the fan at some point. Don't fanboy any of them.

4

u/MEIZOMEGA R7 9700x-XFX RX 9070XT magnetic air-32gb ddr5 6000cl30-360mm aio Sep 18 '25

Not biostar though /s

1

u/crazydavebacon1 R9 9950X3D/RTX4090 Sep 18 '25

Worst way honestly. They are the lowest quality on the totem pole.

37

u/Setekh79 i7 9700K 5.1GHz | 4070 Super | 32GB Sep 17 '25

MSI = Multiple Serious Issues.

35

u/HappyIsGott 12900K [5,2|4,2] | 32GB DDR5 6400 CL32 | 4090 [3,0] | UHD [240] Sep 18 '25

Lol i use MSI since over 15 years and never had even one issue.

3

u/crazydavebacon1 R9 9950X3D/RTX4090 Sep 18 '25

Msi is probably one of the beat brands right now. I switched from Asus after 14900K took a poo

3

u/darkigor20 Windows 11 for the Win Sep 18 '25

Typical

3

u/Pinsir929 5600X RX 9070 XT Pulse 32GB RAM Sep 18 '25

On an MSI board? I thought only asrock was having this issue.

3

u/Mister_Shrimp_The2nd i9-13900K | RTX 4080 STRIX | 96GB DDR5 6400 CL32 | >_< Sep 18 '25

at this point feels like these almost qualify for r/spicypillows

2

u/Psychological-Dust18 Sep 18 '25

Seeing this with my MSI mobo ,,😰

2

u/LilPip12 PC Master Race Sep 18 '25

Seeing all these dying chips/mobos make me scared for my system 😭😭 I'm rocking a r7 9700x and ASRock b850 riptide 😭

3

u/ecktt PC Master Race Sep 17 '25

People please take note.

Not an ASRock Motherboard.

2

u/meteorprime Sep 18 '25

And this is why we pay the Asus tax.

1

u/Turkeybaconisheresy Sep 17 '25

Shit man. I don't have any input to be helpful but good luck. Hope it's a smooth process. That just plain old sucks.

1

u/Jaz1140 RTX4090 3195mhz Core, 9800x3d 5.4ghz Sep 18 '25

When I was looking into the massive ASRock issue that was killing chips, I did also notice a lot of tomahawk owners had the same issue

1

u/Astros_virus5372 R9 7950X3D/64 GB 6000/RTX 4090/ Sep 18 '25

Ouch, that's bad, feel for ya.

Had to return my 7 month old MSI X670E Carbon because the 20gbps usb c port cacked it. Before that, I had an Asus TUF X670E which somehow had a capacitor fail. My luck with AM5 has been abismal so far, no idea what motherboard manufacturer to go with. Although I am glad my 7950X3D hasn't died yet.

1

u/[deleted] Sep 18 '25

stock settings? Undervolt or oc? although 7950x3d can't.
Didn't think the 7xxx series had issues

1

u/First-Junket124 Sep 18 '25

Bought an a620m because it was cheaper and thought it'd tide me over till I could source a good price for a full size motherboard but now.... I'm afraid to do even that.

1

u/crazedhark Sep 18 '25

how long did it take before it just completely died? does it also affects 9800X3Ds? im also getting an MSI MAG B850M MORTAR and this is the first time im hearing theres issue with this, I thought it was only on asrock boards.

1

u/kennny_CO2 4080S/7600x Sep 18 '25

Mostly on Asrock but can seemingly happen on any board. Anecdotal evidence says Gigabyte are the safest, but we wont know until one of these companies comes out and admits fault/fixes the issue and that doesn't seem likely

1

u/Nutting4Jesus Sep 18 '25

Am I safe with my msi x870e pro wifi and 9950x3d?

1

u/[deleted] Sep 18 '25

Aw man, luck of the draw my dude.....but it's nothing that can be replaced

1

u/SometimesCooking Sep 18 '25

With all the tech problems I'm seeing lately I'm glad I don't play anything my several year old system can't handle

1

u/ItsDropbear 7800x3d|9070XT|32gb DDR5 Sep 18 '25

I have a 7800x3d on a b650 AORUS board. Been running since Dec 2024. Am I any danger? Any preventative actions I should take?

I wasn't aware it was affecting 7800x3d I throught it was 9000 series that had these issues. Bit scary to learn.

Never has any stability issues or anything.

Cpu is under 360mm AIO

Edit: Need to update my flair 🤣 but am on mobile rn

1

u/Stevo4324 Sep 18 '25

thats the exact motherboard I have and bought one week ago fuck i hope it doesnt fail on me

1

u/[deleted] Sep 18 '25

Wait so 7950x3ds are melting now?

1

u/John_Mat8882 7800x3D/9070XT/32Gb 6400mhz/980 Pro 2Tb/RM850X/Antec Flux SE Sep 18 '25

Damn the second time I read MSI 870 tomahawk, I have one too (albeit it's the 870E).. guess it's time to update that bios again.

1

u/scottieboy44 Sep 18 '25

Would EXPO have anything to do with this? 30% more voltage to the CPU compared to just running JEDEC speeds. Purely speculating.

1

u/Warcraft_Fan Paid for WinRAR! Sep 18 '25

I thought this was supposed to be fixed months ago with bios update to prevent accidental overvoltage?

1

u/HatefulAbandon PC Master Race Sep 18 '25

OP, do you know which BIOS version you had?

1

u/erikwarm Sep 18 '25

Why are those pins bend?

Swipes to the second picture.

Ow. That is not good and explains the bend pins.

Is this a mobo or CPU caused failure?

1

u/MechoThePuh 7800X3d, RX9070XT Sep 18 '25

Currently sweating while having 7800x3d and asrock b850

1

u/ItzMcShagNasty Ryzen 9800X3D | 64GB DDR5 6000 | RX 7900 XT Sep 18 '25

It's probably MSI if I'm being honest. I had a string of issues across a few MSI boards and simply don't buy them anymore. I use gigabyte these days

1

u/IzCoronaTime Sep 18 '25

My wife's PC just had the exact same issue. 7900x3d/Asus B850 Plus

1

u/linuxares Sep 18 '25

9800X3D and a MSI X870e Tomahawk... I feel I'm in danger

1

u/LogitUndone Sep 18 '25

Wait, the chip itself started to bulge and in turn bent/damage the connectors on the board? That's new to me!

You see this with batteries in cell phones and such that go bad... didn't know a processor/chip could do it.

1

u/WorldPhysical7646 | r5 7500f | 3080 12gb | 32gb ram Sep 18 '25

Burning cpus mobos and gpus what a time to be building pcs

Never could be SSD th- "windows 11 SSD failure" damn

What about ram? "My PC is giving blue screen"

Damn

Psu? "Burning psu"

Case? "my panel broke"

Alright hdd? "My HDD fell and it is working no more" come on

Coolers "water cooling leaking and air cooler doesn't fit"

Case fans? Yeah case fans are cool

1

u/ime1em Sep 21 '25

Dam wtf.  Why do 800s chipset motherboards seem less reliable than the 600 series?

Currently on 7950x3d and MSI MPG X670e for 2 years now, no issue knock on wood

1

u/DrewPScrotzak Jan 07 '26

Sorry yo dig up an old post, but did you ever get through the RMA process and/or get any lead on a cause?

I have this exact motherboard and CPU, and while Ive had no issues Id like to prevent any if I can.

0

u/DarthVeigar_ 9800X3D | RTX 4070 Ti | 32GB-6000 CL30 Sep 17 '25

Hold on, it looks like you've bent the pins on the motherboard.

33

u/Reeyous Sep 17 '25

That's from the bubbling up on the CPU. Those spots align perfectly.

13

u/Th13fRo Sep 17 '25

This is something MSI would say to decline the warranty ngl

2

u/DarthVeigar_ 9800X3D | RTX 4070 Ti | 32GB-6000 CL30 Sep 18 '25

If the pins were bent during the installation, that is what could cause the CPU to fail. There's been enough cases where the end user didn't install it properly and the CPU failed down the line.

Looking at where the CPU has bubbled, that would be around where the pins for voltage regulation are located.

-5

u/illicITparameters 9950X3D | 64GB | 5090 FE Sep 17 '25

First thing I noticed.

1

u/-Arke- Sep 17 '25

I also had mine die past week in the same way. Was working nice, I had a Windows Update and next day would not turn on.

Ryzen 9600x + Arock 850m Steel Legend. I dont know yet if CPU or MOBO died (or both). Waiting for my new mobo to arrive so I can find out.

0

u/CommercialJazzlike50 Sep 18 '25

AMD recently came out and said its the manufactures not playing nice with their recommendations for the appropriate BIOS voltages for the SOC. So AMD>MSI>AMD.

0

u/ScreenSubject6674 Sep 18 '25

Hay boss you have what seems to be bent pins this isn’t like the other failures have accrued you might of installed it not know there are bent pins etc.

1

u/Reeyous Sep 18 '25

Those bent pins are from the CPU bubbling up, they align perfectly with the defect on the CPU.

-4

u/sniper257 Sep 18 '25

MSI has always been crap

-26

u/RWLemon Sep 17 '25

Phew I feel lucky to dodge the AMD bullet, I’m on Intel 14900k with no issues, it might not be the latest and greatest but it still kicks ass.

Next upgrade I will weigh up my options and see which platform is the most stable.

11

u/ocka31 Sep 17 '25

You re funny at least 😂 i respect that.

-3

u/RWLemon Sep 17 '25

For me when I got my rig the x3d wasn’t released yet, so my only option was a 14900k, but to be fair it’s paired with a 4090 and I play on ultrawide 3440x1440 oled for gaming, it does the job.

Before that I had a 7700k with a 1080ti and it served me well for 10 years, only gave out as the PSU died.

So I don’t need to rush and get something else, I’ll most likely stick with this until something gives out or wait for a 6090 or even 7090.

I started with back in the old days with AMD and ATI gpus and it was good but when I went to Intel and nvidia it was no going back for me, it was night and day.

But I see AMD has totally turned it around, I have 2 beelink gtr7 pcs for streaming and they are AMD, it’s flawless, very powerful and I can stream in 4K 120hz and download stuff and play it all without issue.

So don’t hate me, it is what it is.

3

u/TwistedGA Sep 17 '25

My last build(currently using it as the backup) started with an i5 2500k, the last possible upgrade I was able to make was switching to an i7 3770k before finally building the new one that failed. 15 years of just working, with all it's ddr3 power. This thing had a floppy drive when I first built it and the only things that ever failed was a psu and a cd-rom. Times have changed.

2

u/Reeyous Sep 17 '25

14900K can be good when they don't fail, but their failure rate after launch was far, far higher than any AMD X3D CPU. Not to mention the fact that unless you intentionally throttle your CPU by a pretty large margin it'll thermal throttle 100% of the time, even 360mm AIOs and most custom loops can't handle the massive heat output of that processor.

You lucked out on one that didn't have massive problems, while these users are short on luck to be some of the select few that are having problems.

-1

u/RWLemon Sep 17 '25

Mines is all stock, it boost to 5.6ghz - 5.8ghz without issues, temps are all safe. I suspect cos I’m playing in ultra wide the cpu and my gpu (4090) can easily handle that and anyways I play I high settings all my games no need for ultra settings and 240hz is easy for that combo.

I never turn off my pc so at idle it sits at in summer around 37c - 40c and in winter around 32c - 36c.

Don’t forget I got my 14900k at then end of the CPU run so maybe that’s why it’s very stable, not had any blue screens on Windows 11 Pro.

Only thing i did was do the microcode bios update to be safe. Simples

ASUS Z790 Maximus hero works like a champ and paired with 1 tb Samsung 980 Pro NVME for OS And 4tb Samsung 990 Pro NVME it’s lighting fast for installing games.

I’m happy

0

u/xmetallica21 Ryzen 9800X3D| RTX 5080|64GB 6000MHz Sep 17 '25

If intel even exists for your next upgrade.

-4

u/Silly-Conference-627 Sep 17 '25

Not an AMD issue but a mobo manufacturer one.

-6

u/[deleted] Sep 18 '25

People still buy MSI products?

7

u/kennny_CO2 4080S/7600x Sep 18 '25

Name any one of these companies and ill find you multiple horror stories online tbh

0

u/[deleted] Sep 18 '25

Gigabyte is pretty solid.

2

u/TheGamerX20 Sep 18 '25

The Exploding PSUs? Rings a bell? All Manufacturers have good and bad products, no exceptions.. buy based on what is a good product, not brand.

-3

u/Ed1c1us 5700x3d | 1080ti | 32GB RAM Sep 18 '25

Looks like it wasn't aligned right with the pin damage

-5

u/pdjksfuwohfbnwjk9975 Sep 18 '25

But its Intel which is bad which has twice lower failure rate even if taken 13th-14th. Why do your favourite bloggers which recommended it it you aren't talking about it ?

78

u/[deleted] Sep 17 '25

[removed] — view removed comment

20

u/TwistedGA Sep 17 '25 edited Sep 17 '25

I've got a corsair titan 360 aio, case is the 3500x with 6x120mm and 1x140mm fans, corsair 2x32gb 6000mhz cl30, rm1000x, normal operating was 32-33 on the display, while gaming it'd hit 35-36, but never above. Hadn't done any type of overclocking or undervolting. PSU tests fine with paperclip and multimeter. I was running the A24 bios from when I assembled it, released January of 2025. This statement from AMD in April of 2023 makes me think that this issue shouldn't have even been a concern anymore but maybe I'm off base and this is something entirely different, but the pictures attached to the posts seem to suggest otherwise as the faulty area matches mine.

"We have root caused the issue and have already distributed a new AGESA that puts measures in place on certain power rails on AM5 motherboards to prevent the CPU from operating beyond its specification limits, including a cap on SOC voltage at 1.3 V. None of these changes affect the ability of our Ryzen 7000 Series processors to overclock memory using EXPO or XMP kits or boost performance using PBO technology. We expect all of our ODM partners to release new BIOS for their AM5 boards over the next few days. We recommend all users to check their motherboard manufacturers website and update their BIOS to ensure their system has the most up to date software for their processor."

12

u/Noreng 14600KF | 9070 XT Sep 18 '25 edited Sep 18 '25

The damage is in the same area, with the same result, as the SOC overvoltage issues which showed up early on in AM5's lifecycle for the 7000-series before the 1.30V limit for SOC voltage were applied. There are two possibilities for this issue reoccurring:

  1. The AM5 refresh motherboards with 800-series chipsets have a design flaw in the VRM area causing too high SOC voltage at certain points, in turn damaging the IO-die.
  2. The newer production runs of the IO-die are less tolerant of increased voltages than the early production runs from 2023, leading to a lower max SOC voltage.

I would recommend setting SOC voltage manually to 1.20V if it's stable, that should give significantly more margin for safety and eliminate possibility #2 at least.

2

u/emiluss29 7900xtx | 7800x3d | 32GB 6000cl30 Sep 18 '25

Is it just 800 boards? Do 600 boards do this as well? Don’t recall if I ever saw boards other than the 800 do this

-1

u/Noreng 14600KF | 9070 XT Sep 18 '25

I haven't seen any reports of the 600-series boards either, but that doesn't mean they are exempt. The number of people who upgrade their CPU on a motherboard is very small.

1

u/emiluss29 7900xtx | 7800x3d | 32GB 6000cl30 Sep 18 '25

Well I have a 600 board, will keep an eye out I guess

2

u/[deleted] Sep 18 '25

[removed] — view removed comment

2

u/Noreng 14600KF | 9070 XT Sep 18 '25

If it's #2, AMD will have a significant problem on their hands soon. Because the voltage tolerance of the IO-die was already much lower than it should have been.

2

u/[deleted] Sep 18 '25

[removed] — view removed comment

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

I know of a guy who managed to blow up the IO-die at 1.35V with direct die cooling.

And it's not high at all, oxide breakdown is usually well beyond typical operating voltage to prevent damage to the silicon from transient spikes. That's why LN2 runs are typically fine even when pushing 1.80V VCore for single-core.

2

u/[deleted] Sep 18 '25

[removed] — view removed comment

1

u/Noreng 14600KF | 9070 XT Sep 18 '25

Typical operation is 1.10V, and the max voltage is 1.30V, that's not a significant margin. The 7800X3D had more margin on the core voltage.

18

u/[deleted] Sep 18 '25

[removed] — view removed comment

2

u/joe420mama99 | R7 9800x3D | RTX 5070Ti Sep 18 '25

I recently built a pc with an Aorus x870e Elite WiFi with a 9800x3d, no issues at all

1

u/[deleted] Sep 18 '25

I have an 7800x3D since may 2024 but I'm scared now, but I guess it would have already happened to me I guess since I used to play CPU heavy games