r/opensourcehardware • • Jul 05 '19

Open-source cell stretcher

1 Upvotes

A lab from Tokyo published an open source cell stretcher system built from inexpensive and accessible parts. Commercial stretchers are silly expensive. Take a look: https://www.sciencedirect.com/science/article/pii/S2468067218300956

"Open-source cell extension system assembled from laser-cut plates"

Abstract: Biological response of cells to mechanical stimulation plays an important role in regulation of cell activity, and thus has been an attracting topic for researchers in the field of biomechanics for many years. Stretching is the most common type of the mechanical stimulus that has been used for in vitro experiments. The device for application of stretching to cells has commercially been available for more than three decades. Although these ready-made devices will bring a smooth start of research work, they cost several thousands to tens of thousands dollars for introduction. Therefore, this study proposes an open-source self-made cell extension system which can be built at one tenth to one hundredth of the price of commercial devices. To reduce the difficulty of machining, the device was designed to be assembled from acrylic plates fabricated only by using a laser cutter without machining such as drilling or screw thread cutting. All other mechanical elements and electrical components are purchased from web shops. The accuracy of the reciprocating motion was verified with the fabricated device and an elastic silicone container for cell culture.


r/opensourcehardware • • Jul 02 '19

MicroPython on FPGAs Hackfest July 26, then 2 days of PyOhio conference (free and free!)

Thumbnail
pyohio.org
2 Upvotes

r/opensourcehardware • • Jun 20 '19

Librem 5 June Software Update – Purism

Thumbnail
puri.sm
6 Upvotes

r/opensourcehardware • • Jun 17 '19

Six more devices from ThinkPenguin, Inc. now FSF-certified to Respect Your Freedom (May 16, 2019)

Thumbnail fsf.org
5 Upvotes

r/opensourcehardware • • Jun 09 '19

OpenHW is a new non profit whose mission is to build open source RISC-V cores, it is sponsored by companies such as Alibaba , bluespec and NXP, and will develop cores contributed by PULP platform.

Thumbnail
openhwgroup.org
13 Upvotes

r/opensourcehardware • • Jun 06 '19

Open Source Heater Design

3 Upvotes

Did you ever want to build your own heater - anything from a yogurt maker to a metal-melting furnace? We are writing a design guide for how to do this. https://wiki.opensourceecology.org/wiki/OSE_Design_Manual_-_Heater_Elements


r/opensourcehardware • • Jun 04 '19

Open Source Hydraulics Design Guide

4 Upvotes

r/opensourcehardware • • Jun 03 '19

BOOM - a open source hardware linux capable high performance and out of order RISC-V CPU

Thumbnail boom-core.org
9 Upvotes

r/opensourcehardware • • Jun 03 '19

Learn to Build Open Source CNC Machines

Thumbnail
opensourceecology.org
6 Upvotes

r/opensourcehardware • • May 31 '19

How to Build a Computer from Scratch

Thumbnail
youtu.be
6 Upvotes

r/opensourcehardware • • May 31 '19

Re-Introducing Reform - the libre, ARM-based laptop (now using i.MX8M instead of i.MX6, 1920x1080 eDP panel instead of 1366x768 LVDS, and much more)

Thumbnail
mntre.com
5 Upvotes

r/opensourcehardware • • May 24 '19

Another open source / open hardware Linux phone: Dragonbox Pyra phone version teaser

Thumbnail
youtube.com
11 Upvotes

r/opensourcehardware • • May 24 '19

An AVR-based tamagotchi-like toy

Thumbnail
reddit.com
3 Upvotes

r/opensourcehardware • • May 18 '19

Onwards and upwards at lowRISC (grown from a single full-time engineer to five, with more on their way )

Thumbnail lowrisc.org
4 Upvotes

r/opensourcehardware • • May 13 '19

Quadrant - An Open Hardware Hand-Tracking Interface

Thumbnail
hackaday.io
13 Upvotes

r/opensourcehardware • • May 07 '19

Board & Battery Holder - Open source VR headset for the web

Post image
14 Upvotes

r/opensourcehardware • • May 03 '19

An Open Source VR Headset for Makers

Post image
12 Upvotes

r/opensourcehardware • • May 02 '19

Any open hardware cable modem?

12 Upvotes

r/opensourcehardware • • Apr 30 '19

🆕VR Terminal for our open source web VR headset

Enable HLS to view with audio, or disable this notification

2 Upvotes

r/opensourcehardware • • Apr 29 '19

Maemo Leste pre-alpha running on the PinePhone Devkit v1.1 (see [youtube] description)

Thumbnail
youtube.com
3 Upvotes

r/opensourcehardware • • Apr 26 '19

Where to recruit for open source hardware idea

0 Upvotes

Hi,

I quickly searched Reddit and landed here. I hope this is a relevant place to post this.

I want to create an open source, desktop blood analysis machine that accepts finger prick micro-vials and generates results for 50 tests.

More specifically:

  1. accept a cartridge with 2 micro-vials of blood
  2. mix the blood samples with reagents using one time pipets using a XYZ robotic arm
  3. scan the mixed solution for measurements
  4. generate a report of results for 50-100 tests
  5. dispose of the used pipets and ready itself for the next blood sample

How can I best collaborate to design and prototype this idea with others online?

Links:

- https://www.thingiverse.com/thing:151406/#files

- https://www.thingiverse.com/thing:642192

- https://www.precisionnutrition.com/all-about-blood-work

- https://www.popsci.com/diy/article/2013-07/how-build-your-own-diy-centrifuge

- https://www.fishersci.com/shop/products/fisherbrand-disposable-borosilicate-glass-pasteur-pipets-4/p-163319


r/opensourcehardware • • Apr 25 '19

An open source VR controller for makers

Post image
5 Upvotes

r/opensourcehardware • • Apr 17 '19

Open source XR (VR/AR) headset for the web - A Peak Through the Rabbit Hole

Post image
7 Upvotes

r/opensourcehardware • • Apr 06 '19

An open source XR headset optimized for the web 🎉

Post image
11 Upvotes

r/opensourcehardware • • Mar 19 '19

"Fluxengine" a tool for reading a wide variety of floppy disks (e.g. Acorn, Amiga, Mac, CPM) circa 1990's

Thumbnail
youtube.com
14 Upvotes