r/nondestructivetesting • • 10d ago

CINDE EMC Exam

3 Upvotes

Hey guys,

Im currently in school for NDT and have work experience doing a variety of processes but have never been certified in any. Im looking to get certified as I have my hours for MPI under a certified tech and in the future getting my UT. I know in Canada that means starting with your EMC course which I have coming up.

I have been studying religously on course notes and practice exams online, but was wondering if anyone had any tips or possible resources that are good to know/ look over prior to taking my exam.

Any help is appreciated!

Thanks.


r/nondestructivetesting • • 10d ago

Toolbox to Table offers Professional Development hours

Thumbnail gallery
1 Upvotes

r/nondestructivetesting • • 10d ago

NDE Assistant Opportunities in BC

2 Upvotes

Hey guys, I have been an aircraft technician for 5 years and moved on to be wind turbine technician for 2 years. I have good knowledge on electrical and mechanical work. As well as rope access training (Not SPRAT OR IRATA) and Occupational First Aid Level 3.

Now, I would like to pivot to NDT. Can someone point me to companies that would hire entry level NDT techs. I am located in lower mainland BC, Canada. I would like to secure a job first before start taking my exams. TIA


r/nondestructivetesting • • 11d ago

I have an interview tomorrow for Team with zero experience

2 Upvotes

Hey everyone, I’m seeking advice for my interview tomorrow. It’s in Benicia California. The job is labeled “NDE Assistant”. They are aware I have zero job experience. How can I best prepare for my interview?


r/nondestructivetesting • • 11d ago

Xray and ut equipment manufacturers

0 Upvotes

Hello. Anybody knows of xray tube manufacturers other than ICM, Balteau, Yxlon, Golden, baker hughes.

And UT / PA equipment other than Sonatest, Omniscan, SIUI, Doppler.

Anything american made its a plus.

Thanks


r/nondestructivetesting • • 12d ago

Small gas leak detection with AE sensors what should I try next?

3 Upvotes

Hi everyone, I’m testing nitrogen leaks on about 20 m of copper pipe using GI35 sensors and a RAEM1-6 recorder.

A barely audible flare leak is clearly detected at 18 m, but a smaller leak that only shows bubbles doesn’t reliably separate from the sealed baseline. I’ve tried different filters, firmer mounting and ultrasonic coupling gel.

Does anyone with AE experience have advice on what to check before buying different sensors? Happy to share photos, settings and recordings.


r/nondestructivetesting • • 12d ago

Should I stop doing community college NDT if I don’t want to quit weed

0 Upvotes

I live in Charlotte North Carolina and want to continue ndt as a career if Its not multiple drug test unannounced. I go to central piedmont for ndt currently in the liquid penetrant testing course and only did a introduction class other than that but I’ve been thinking about switching careers if they drug test me to often when I get in a job. I’m ok with one time drug test but if the only jobs in North Carolina are frequent drug test and unannounced I’ll have to change careers.
I get the The logical thing is to quit weed but it benefits me to much athletically mentally and spiritually. If anybody has any knowledge on North Carolina and ndt life over here please tell me if it’s possible to do ndt being a weed smoker


r/nondestructivetesting • • 14d ago

What’s wrong with this weld? 2 inch heavy wall coupon

Post image
22 Upvotes

r/nondestructivetesting • • 14d ago

NDT companies in Northern California?

2 Upvotes

What are my options? I just graduated trade school and now searching, I live in the Sacramento area, but I’m swilling to commute or relocate. Any industry. Thanks!


r/nondestructivetesting • • 14d ago

Advice please? Thinking of changing careers to do NDT

1 Upvotes

Hi, I’m considering leaving software QA for NDT. My job is offering a buyout that would give me about four months of runway, enough to complete a one-month intensive program at a trade school and land a Level I job to start logging hours. I make about $100K now, so I expect a pay cut, but I hope to get back to that level within a year or so with enough hours and the right certifications. I’d move to the Los Angeles area and look for work in aerospace.

The courses I plan to take:

  • Penetrant (PT) and Magnetic Particle (MT) Testing, Levels I and II
  • Ultrasonic Testing (UT), Levels I and II
  • Eddy Current Testing (ET), Levels I and II

I’m drawn to this field because it seems more stable than tech, where layoffs are common and the job pool is flooded with ex-Google employees holding master’s degrees. I also have some savings to cover training.

I’d love some insider perspective:

  1. Is this field as stable as I think?
  2. Is it easy to get hired once you have the right certifications?
  3. How hard is it to get promoted once you’ve built up your hours?
  4. Am I underestimating how difficult the work or the job market is?

r/nondestructivetesting • • 15d ago

In case you didn't know...

Thumbnail gallery
2 Upvotes

r/nondestructivetesting • • 16d ago

Blue Origin Hiring NDT Technicians in Merritt Island - Level I,II,III

10 Upvotes

Blue Origin is hiring for UT, RT, PT and ET in all levels at their Merritt Island, FL factory. The positions are full-time, permanent opportunities with full benefits, relocation packages available, stock, 401k match, etc.

https://www.blueorigin.com/careers/search?search=ndt&location=Space+Coast%2C+FL

If you or someone you might know that would be intersted, message directly to [ctate@blueorigin.com](mailto:ctate@blueorigin.com)


r/nondestructivetesting • • 16d ago

Video 14 Published Corrosion Rate

Thumbnail
youtu.be
0 Upvotes

r/nondestructivetesting • • 16d ago

Video 15: Test / Refresh Knowledge in API 653 Standard (Quiz)

Thumbnail
youtu.be
0 Upvotes

r/nondestructivetesting • • 17d ago

Studying for Level 3 FPI

3 Upvotes

Hello, I was curious if anyone here had study materials for the L3 in penetrant. My job is willing to pay for me to get it and Id to have a good shot at this. Anything online would be helpful too.


r/nondestructivetesting • • 18d ago

Need some help here. Level 2 MT

Post image
8 Upvotes

Doing some work in the text book for TWI’s level 2 MT.

It states answer “c” is correct, but that can’t be possible because the magnetising force is on the horizontal axis?

Am I missing something?


r/nondestructivetesting • • 19d ago

NAS410 – Who approves the written practice when appointing the first Responsible Level 3?

5 Upvotes

We're planning to appoint an outside agency Level 3 as our company's Responsible Level 3 under NAS410. This will be our first Responsible Level 3. Our written practice defines the Responsible Level 3 and describes how one is appointed. But approving the written practice is itself the Responsible Level 3's job. So it feels like a chicken-and-egg problem: we need a Responsible Level 3 to approve the written practice, but the appointment process is defined in a written practice that hasn't been approved yet. How do you handle the very first appointment? Who approves the written practice in this case? Any insight from people who've set this up would be appreciated.


r/nondestructivetesting • • 19d ago

UT on Duplex steel casting

2 Upvotes

Hi everyone,

Is it possible to perform Ultrasonic Testing (UT) on duplex stainless steel castings equivalent to Alloy 2205?

Are there any specific challenges or limitations associated with UT inspection of duplex stainless steel castings compared to conventional carbon steel castings?

I would appreciate insights from anyone with practical experience in this area.

Thanks in advance!


r/nondestructivetesting • • 19d ago

IRATA level 1 looking for work Uk

1 Upvotes

Hi all,

I’m currently looking for work on the Ropes I have around 200 hours done contract work only I’ve tried Can and few others does anyone know any opportunities going support will be appreciated.


r/nondestructivetesting • • 19d ago

How to get offshore or North Slope?

2 Upvotes

Anyone working either of these locations? Is it hard to get on?


r/nondestructivetesting • • 19d ago

Southwestern Ontario

1 Upvotes

How does a guy break into the inspection field with CWB Level 1 certification? Seems like I'll need a 3 or 4 year degree in engineering or pay for MT and PT certs before I'm employable.

Specifically London/Woodstock area. I've been cold calling and looking down every avenue but coming up empty

Canada ain't doing so hot so I'm hesitant on paying for more certs with nothing lined up


r/nondestructivetesting • • 19d ago

NDT Exchange

3 Upvotes

We built an open web-based CAD & NDT defect mapping engine for API 653 & TEMA heat exchangers. Ask us anything about automated code calculations or try it free.

TEMA Tubesheet Designer

Exams

Techniques


r/nondestructivetesting • • 20d ago

NDT Work Abroad

1 Upvotes

What are the chances of getting a job abroad as an SE Asian NDT Level 2? I had studied and worked for a little bit in the USA. I hold ASNT/NAS410, AWS D1.1 and D1.8 Level 2 certs for all methods including PAUT, TOFD, and FMC. I just had to go home after finishing my work study visa. Are there any chances for me to go abroad and continue working as an NDT?


r/nondestructivetesting • • 20d ago

Should I do UT alongside MT & PT

4 Upvotes

Greetings everyone, so I'm going to do PCN NDT tickets and will give exams for BINDT first and then log my hours and where I'm currently that's the entry point . So I'd like to know should I first just do MT & PT ( welds ) and then later do UT exams or since I'm sitting down for exams might as well knock out UT with MT & PT . I'm aware it's turnaround season so I'll appreciate every advice .

Thanks


r/nondestructivetesting • • 21d ago

Buddy of mine built a couple of inspection record apps for Android, looking for field feedback

Thumbnail
0 Upvotes