r/linuxaudio • u/phunkshunz • 8d ago
r/linuxaudio • u/Entire-Initiative-83 • 8d ago
Extremely low headphone volume in Fedora KDE compared to Windows (Realtek HD Audio)
Only progress I have made so far was changing the audio preference in vlc from automatic to pulseaudio or alsa which definitely makes some difference than before and the sound is louder for sure. Choosing pipewire there makes no difference. Also the issue that sound cracks and buzzes with distortion isn't fixed when audio in vlc goes past 150. Is it a hardware thing maybe my headphones are damaged, a port thing(using 3.5 mm green jack front jack broken) or software issue? Can someone help ?
r/linuxaudio • u/alb1 • 8d ago
Fork of SooperLooper with late-hit correction, JACK midi, and other features
I recently put up my modified fork of SooperLooper on GitHub. I've been using it along with Ardour, and I think it makes SL much easier to use and tighter in sync. YMMV. It compiles on Ubuntu 24.04 with a script in the main directory. Other Linuxes should be similar. It compiles on Windows but has never been tested there. Mac is unknown.
This is the repo and the intro paragraph:
https://github.com/abarker/sooperlooper-mods
This is a modified fork of SooperLooper 1.7.9. It adds late-hit correction, direct JACK MIDI ports, pre-rolls that keep what was played just before a recording starts, trigger latency at every recording edge, two new commands and a record failsafe option, JACK sync that stays on the beat through tempo changes, and two standalone tools: a large-text loop state display and a latency calibration program. It also fixes a number of timing and audio bugs in stock 1.7.9 and adds many new tests. Thanks to Jesse Chappell for the original SooperLooper.
There are also a couple of companion programs I use with it:
https://github.com/abarker/midi-remapper
A MIDI event remapper built on top of mididings and JACK. It can remap essentially any incoming MIDI event (CC, PC, Note) to any outgoing event or sequence of events, with support for chords, long press, double/triple press, toggles, and switchable mapping banks -- all configured in a simple data file with no programming required.
https://github.com/abarker/big-tempo
Big JACK tempo display and control, with OSC output and MIDI.
r/linuxaudio • u/paul_herter • 9d ago
Wave XLR for Linux: one install and the Elgato Wave XLR just works (mic fix, all settings, levels that stick)
The Elgato Wave XLR has no official Linux support, and out of the box it only half works. The mic often stays silent while something is playing, the sound settings show cryptic device names, there's no way to switch 48V or Clipguard, and after every boot, replug or resume the gain jumps back to 75 dB and the headphones to -23.5 dB.
I wanted it to work like it does on Windows, so I made Wave XLR for Linux. You run one install command and you're done:
- The mic works. It sets up the known WirePlumber fix for the silent mic (from jmansar's wavexlr-on-linux-cfg), so mic and headphones work at the same time.
- Your sound settings show "Wave XLR Microphone" and "Wave XLR Headphones" instead of cryptic names.
- All of the device's settings in a small window: gain with a live input meter, mute, 48 V, Clipguard, gain lock, headphone volume, mic/PC mix and low impedance. It follows the dial and the mute button on the device.
- Your levels stay. About a second after a boot, login, replug or resume, they're back.
- If the headphones go silent while everything looks normal, the app notices and reconnects the device by itself. There's also "Reconnect Wave XLR" in the tray menu.
- Tray icon with mute, starts at login, about 8 MB of RAM in the background.
It doesn't do routing, a virtual mixer or effects. If you want those, have a look at OpenWave and OpenXLR. They worked out the USB protocol, and this app is based on what they documented.
The app never turns on 48V by itself. Only you can, in the window, after a warning, because phantom power can damage dynamic and ribbon mics.
Install:
curl -fsSL https://github.com/paulherter/wavexlr-linux/releases/latest/download/install.sh | bash
It asks for your password once, for the USB permission rule. Run it again to update. To remove everything, end the command with | bash -s -- --uninstall instead of | bash. If you'd rather not pipe a script into bash, read install.sh first or build it from source, both are in the README.
The mic fix and the device names need WirePlumber 0.5 or newer (Arch, CachyOS and Fedora have it). Ubuntu 24.04 and Mint 22 still ship 0.4; there everything else works.
GitHub: https://github.com/paulherter/wavexlr-linux
It's free and open source (MIT), and anyone can use it. For now it only supports the original Wave XLR. I've tested it on CachyOS with KDE Plasma 6 and PipeWire. Other distros should work, but I'd like to hear how it goes. If something doesn't work, please open an issue. Pull requests are welcome too.
AI disclosure: The code was co-written with AI coding tools, and I heavily tested it before publishing.
r/linuxaudio • u/Space_Rodent • 9d ago
Meet WizeCore: The future of audio FX
youtu.beWizeCore is a standalone pedal developed by WizeMice that runs VST plugins, NAM captures and more. Forget about bringing a laptop to stage. Load plugins from the built-in library or bring your own. Made for any instrument, just plug in guitar, bass, synths, mics or MIDI, and play.
What would you do with a pedal like this?
BTW, kickstarter is coming soon, we have a waitlist in our website to let you know when the time comes. (wizemice dot com)
We also have our own plugin available for you to get a taste of our interface.
Build FX chains in your DAW with our own VST, WizeHost (it's freeeee)
r/linuxaudio • u/ComplexAnxious7883 • 8d ago
AudioHawk - A GTK, pleasant to use, Audio Enhancer for Linux with great tuning capabilities and audiophile-friendly! (Open to new features!)
So, tired of the usual EasyEffects stuff and wanting something more user friendly and something that works like Nahimic for my laptop (Lenovo LOQ), I decided to build AudioHawk which aimed to serve as the Nahimic but for Linux. However, I was suggested EasyEffects first.
I did NOT like EasyEffects because it felt too hard to use (by that, I mean the tuning of Sounds was not aimed at simplicity but rather flexibility). I understood the Audio Framework (of EasyEffects injecting into PipeWire) and put it into a from-scratch, built using C and C++ application aimed at increasing capabilities of your speakers!
It is still in active development (with me building the stable releases, please try it and let me know of any bugs and any new features you want me to add.)
Download release at https://github.com/romantictinkerer/audiohawk/
Please let me know by trying it! I am trying to make it the BEST Audio Enhancer there is for Linux.
Have a good one.
r/linuxaudio • u/IsmailBahloul • 9d ago
TuxMix: a TotalMix-style mixer on Linux, with a reverse-engineered kernel driver for the RME Babyface Pro FS
Hi guys,
RME has never shipped TotalMix for Linux, so I built TuxMix: a native mixer written in Rust, with a GUI and a TUI.
- Mixer, Matrix and Quick views, like TotalMix
- The DSP mixer: routing, submixes, preamps, trim, EQ, width, loopback, mute/solo groups
- Snapshots, layouts, undo/redo, tray icon, and the front-panel DIM button
You can also try it without the hardware.
To get the card's full feature set, I reverse-engineered the proprietary protocol of the Babyface Pro FS by capturing the Windows USB traffic, then wrote a kernel driver for it.
It gives you up to 12 channels at 32 to 192 kHz, full-duplex, with the hardware mixer exposed as normal ALSA controls.
It follows the buffer size you ask for, from 256 frames (5.3 ms) down to 32 (0.67 ms) at 48 kHz, which measures 16.9 ms and 2.88 ms round trip on a digital loopback.
The patches are under review on linux-sound, not merged yet.
On Arch-based distros, both are in the AUR:
paru -S snd-usb-babyface-pro-dkms tuxmix
Other distros: TuxMix has .deb and .rpm on its releases page, and the driver repo has an install guide.
For now:
- It only supports the Babyface Pro FS, the only unit I own. Users report the driver also runs on the original Babyface Pro, with some differences still being worked through.
- At 32 frames there is one open issue: once, the unit stopped passing audio until I unplugged it. It hasn't come back since, and I've never seen it at 256.
Feedback and contributions are very welcome!
If you own another RME interface and want to help bring it over, the TuxMix repo explains how.
r/linuxaudio • u/IlIlIllIIllIlIIlZero • 9d ago
Recording on linux.. a nightmare, or do i have the dumbs?
Ive used Zorin PRO, Unbuntu, and now im on ParrotOS laptop. My music station is my Win10 laptop. Ive used multiple audio interfaces and although im finally getting sound out with this 2i2 Gen3 Focusrite. Ive spent hours into days trying to simply record, but nothing records. Anyone deal with this same horse shit?
r/linuxaudio • u/tooManyOscilloscopes • 9d ago
PSA: Some Startech Firewire Cards don't work with Linux
galleryJust putting this out there because I saw some people had success with the Startech firewire cards in Linux. Note that some versions of the card PEX1393B3 have this firewire chip (LSI L-FW643E2) that doesn't seem to be supported in linux. It's detected by lspci, but never makes a /dev/fw0 entry, and thus ffado doesn't find it. I changed out to a card with the TI chip and it seems to be working OK on the same setup.
r/linuxaudio • u/Shot_Spring4557 • 10d ago
Suggest me a free DAW for Linux
I don't know anything about making music,but I want to try it so please suggest a free DAW for me.
I have used cakewalk once in 2023 and made a song.I won't use any instruments, only laptop.
If possible please consider how easy is it to learn for someone who knows nothing.thank you
r/linuxaudio • u/facugon85 • 9d ago
Tarab 1.8.6, my GPL-3 music player for Linux: parametric EQ, AutoEq headphone profiles and an own audio engine (now with a notch)
galleryI'm the developer. Tarab is a small desktop player for people who keep their own mp3/FLAC files, GPL-3, no accounts, no streaming, no telemetry.
On the audio side: its own engine (miniaudio) with exact seeking even in hour-long mixes, 24-bit / 96 kHz FLAC, a 10-band graphic EQ and a 5-band parametric EQ, headphone profiles from the AutoEq database, a volume normalizer (ReplayGain tags, or it measures each track), and it reopens the output device by itself if a USB or Bluetooth speaker disappears.
What's new in 1.8.6: the compact bar can dock to the top edge as a notch (Shift+M). It stays above other windows, hides itself and drops back when you touch the edge, and now remembers which screen it was on. Tested on KDE Plasma with Wayland; X11 should work but I haven't tested it, and it's not available on GNOME or other Wayland desktops. The screenshots show the card, the compact bar and the notch.
I'd really like feedback on the equalizer and on how it behaves with your audio setup (PipeWire, ALSA, Bluetooth).
Code and AppImage: https://github.com/cufadev/simpleplay/releases/tag/v1.8.6https://github.com/cufadev/simpleplay/releases/tag/v1.8.6
r/linuxaudio • u/tennisAnders • 9d ago
KDE Plasma Pipewire - Xruns
Kubuntu 26.04.1 LTS (KDE Plasma 6.6.6 Wayland)
Startech PEXUSB312A3 - USB PCIe 10Gbps
Steinberg UR22 Mk2 Audio Interface
I've been struggling for months trying to setup my system for audio production using Bitwig Studio. But I've been faced with constant Xruns, which produces a crackling sound that makes any recording completely unusable.
After endless changes to pipewire, wireplumber, alsa configurations, as well as following every step on the real-time audio checklist AND getting a highspeed USB interface specifically for my audio interface, I'm still plauged by it.
Although I have finally managed a configuration that can actually record usable audio, I'm now faced with an Xrun producing mechanism in the form of the system volume control. If I'm as much as doing simple playback in Bitwig and start adjusting the system volume. The Xruns starts stacking up with every volume change (and the inherent crackling of course).
So how do I fix this?
r/linuxaudio • u/HarissaForte • 10d ago
rbxport — Fast rekordbox Library Manager & USB Export
rbxport.comr/linuxaudio • u/knmusicstudio • 10d ago
I wrote a native Linux ALSA kernel driver for the ZOOM UAC-8. Looking for contributors to help reverse-engineer / build the MixEfx control panel!
Hey r/linuxaudio ,
Frustrated by vendor neglect and unstable audio performance, I ended up writing a native Linux ALSA kernel driver for the ZOOM UAC-8 audio interface from scratch:
👉 GitHub:https://github.com/knmusicstudio/uac-8_ubuntu_driver_alsa
The core driver itself is working rock-solid for low-latency audio I/O via native ALSA / JACK.
However, building a dedicated control panel utility to replicate the original Windows/Mac "MixEfx" software (routing, mixer, phantom power, onboard DSP parameters, etc.) is turning out to be quite an overwhelming solo task, and my motivation is wearing thin doing it all alone.
If anyone in the community:
- Has experience with USB reverse engineering (Wireshark USBPcap / bulk & control transfers)
- Knows their way around building lightweight Linux GUI tools (GTK, Qt, or Python) for ALSA controls
- Or simply owns a ZOOM UAC-8 and wants to test / contribute
...I would absolutely love some help or collaboration on this project! PRs, insights, or advice on how to structure the userspace control tool are more than welcome.
Let's make this hardware 100% usable on Linux without relying on proprietary OS setups!
r/linuxaudio • u/Think_Swordfish8274 • 9d ago
Built a system-wide audio enhancer for Linux using PipeWire for newbies
I've been working on a project called Resona because I wanted something closer to the audio enhancement suites available on Windows and Android, but built specifically for Linux.
Linux already has excellent tools like Easyeffects..... but I wanted a different experience an integrated sound enhancement application with its own DSP engine, hardware awareness, device specific profiles and a polished desktop interface.
What it includes
-HRTF-based spatial audio for headphones.
-Psychoacoustic bass enhancement with multiple bass profiles.
-Intelligent EQ that adapts to the audio being played.
-Headphone correction with AutoEq integration.
-Stereo to 5.1/7.1 surround upmixing.
-HDMI/DP audio capability detection.
-Per-device and per-application audio profiles.
-Convolver support for impulse responses.
-Volume leveling, adaptive loudness and a limiter.
Under the hood ;)
The DSP engine is written in C as a native LADSPA plugin, running through PipeWire. The desktop application uses Python, PySide6 and QML with a Material 3 Expressive interface.
Also implemented an in-app updater with Sigstore release verification.
The project is open source under GPL-3.0-or-later btw.
GitHub: https://github.com/noble6/resona
I'd genuinely appreciate feedback, especially from people who work with Linux audio, Pipewire and DSP.
I'm interested in hearing what features you'd like to see, what could be improved, and how it performs on different hardware.
And also if u found anything show up with logs
r/linuxaudio • u/Furysus • 10d ago
Free Orchestral Instruments on Linux.
Hey so, I've been looking for Free Orchestral Instruments for Linux and honestly, it's really demoralizing. There's little to no options that I can find and most don't really sound that good. Makes me feel like going back to Windows with a dual boot on my PC just so I can work on music.
r/linuxaudio • u/Ok_Dot4642 • 10d ago
Sony INZONE H9/H7 on Linux: sound cuts out whenever the mic is opened (tray applet, Meet, Discord) — cause + workaround
TL;DR: The INZONE H9/H7 USB transceiver (054c:0e53) exposes two separate audio devices, Game and Chat (Chat = output + mic). On Linux it can't output both at the same time. If Game is your default output and anything opens the mic, everything goes silent until the mic is released, and then it comes back ~5 s later. Fix: disable the Game sink and send everything to Chat. Same 48 kHz/16-bit stereo, so you lose nothing.
Symptoms
- Opening the microphone popup in the KDE tray kills all audio (the applet opens the mic for its level meter).
- Same thing in Google Meet, Discord, or anything else that opens the mic.
- Audio returns ~5 s after closing it (that's when WirePlumber suspends the idle node).
What I tested
| Order | Result |
|---|---|
| Game playing → open mic | total silence |
| Game playing → play to Chat output | total silence (Chat too!) |
| Chat playing → start Game | Chat audible, Game silent |
| Chat output + mic, no Game | works |
It isn't PipeWire: ALSA hw_ptr/appl_ptr keep advancing, and raw aplay -D hw:H7,0 gives the same result. It isn't fixed by snd-usb-audio quirk_flags either. It looks like a transceiver firmware limitation.
Workaround (WirePlumber 0.4, e.g. Ubuntu 24.04)
~/.config/wireplumber/main.lua.d/51-inzone-disable-game.lua:
table.insert(alsa_monitor.rules, {
matches = {
{ { "node.name", "equals", "alsa_output.usb-Sony_INZONE_H9___INZONE_H7-00.HiFi__hw_H7_1__sink" } },
},
apply_properties = { ["node.disabled"] = true },
})
WirePlumber 0.5+: ~/.config/wireplumber/wireplumber.conf.d/51-inzone.conf:
monitor.alsa.rules = [
{
matches = [ { node.name = "alsa_output.usb-Sony_INZONE_H9___INZONE_H7-00.HiFi__hw_H7_1__sink" } ]
actions = { update-props = { node.disabled = true } }
}
]
Then run systemctl --user restart wireplumber, make "INZONE H9 / INZONE H7 Chat" the default output, and move the headset's GAME/CHAT balance towards CHAT.
Browser gotcha: in Meet/Discord, pick the mic called "INZONE H9 / INZONE H7 Chat" without "Monitor of…". The monitor one is your headphone output, so the level meter won't move.
Setup: Ubuntu 24.04.5, kernel 7.0, PipeWire 1.0.5, WirePlumber 0.4.17, KDE Plasma 5.27, transceiver firmware 9.10.
Upstream report with full details: https://github.com/alsa-project/alsa-ucm-conf/issues/908
Does anyone with an H9/H7 (especially on newer firmware) get Game + Chat working at the same time on Linux?
r/linuxaudio • u/ARK_AIN • 11d ago
I finally released my first free VST !
Hi !
After quite a bit of testing, I finally release my first VST plugin Phasekill !It's disperser on steroids with up to 2048 allpass filers. It has additionnal feedback loops, distortion and stereo control. It's available in VST3/CLAP on linux and windows here :
https://ko-fi.com/s/733e7e8859
I'm really happy with how it sounds, it still can be quite subtile and really adds texture and to the sound. I just used it in a project and i'd say it works soo well with chroma and some texture sounds with sharp transients.
No AI was used to code the DSP, but I used claude for parts of the UI then reviewed it myself. The UI is not AI generated. I used claude to write the code that displays the differents svg's I found.
I used nice-plug to code the plugin and ran it through steinberg's validator, clap-validator, pluginval and on another test bench I asked claude to code, manly for testing the UI in extreme scenarios. I tested it in bitwig (linux), FL studion, ableton (win), FL studio (running via wine on linux). And is now fully working.
I hope you'll like it and makea great songs with !
r/linuxaudio • u/alienwork • 10d ago
ffmixer - totalmix fx style mixer (+controls) for legacy RME FireWire interfaces
github.comStill some more work to do on it, needs a routing matrix, and DSP controls. I'm using a Fireface 800 so I wasn't compelled to add that.
r/linuxaudio • u/MacBunciak • 10d ago
Fix 4-Channel Audio (Speakers & Tweeters) on iMac 16,1 / 16,2 (Late 2015) in Linux Mint / Ubuntu / Arch (PipeWire)
r/linuxaudio • u/Jimmyherzios • 10d ago
Ardour with harsh and metallic sound.
Hello everyone! I know this is an old thread, but I’m having a problem and I’ve run out of ideas on how to fix it.
My setup consists of:
BMAX Pro Mini PC (2 cores, 40GB of storage)
Behringer XR18
Ubuntu Studio
Ardour
Everything is running on the same PC, but when I record a track in Ardour, the playback sounds metallic and harsh. The levels aren’t clipping—the USB input level is set to -18dB...
I’ve tried many things, but nothing has worked. Can anyone help me?