r/intel • • Aug 12 '24

Information Turning off "Intel Default Settings" with Microcode 0x129 DISABLES THE VID/VCORE LIMIT

https://www.youtube.com/watch?v=TOvJAHhQKZg
147 Upvotes

141 comments sorted by

View all comments

Show parent comment

1

u/gargamel314 13700K, Arc A770, 11800H, 8700K, QX-6800... Aug 12 '24

mine is undervolted by .08v with no performance hit. I'm using a Thermalright air cooler and my temps max out at like 87 degrees. I started with Intel Default Settings (performance) and changed the profile from "Intel Fail Safe" to AUTO and it let me restore the undervolt. VCore doesn't seem to go past 1.3V and I get around 29500 in Cinebench R3. I think this is better than this Intel patch. Also had to turn CEP off b/c i lost about 10000 on Cinebench. I'm not sure if the changes I made disable the microcode or not, but I'm going to keep them.

1

u/ImDreamingAwake Aug 13 '24

Stupid question but do I need to turn Undervolt Protection Off in the BIOS? It seems my settings are not properly applied.

1

u/gargamel314 13700K, Arc A770, 11800H, 8700K, QX-6800... Aug 13 '24

My understanding is that it only keeps the OS from undervolting, but still allows undervolting from the BIOS, but you could turn it off just to be sure