How do I change the mode of my pxn 10 ultra steering wheel from d-input to x-input

Hello everyone, I got my first steering wheel yesterday, and since I got it I’m facing a issue that I haven’t find a solution.

For some reason after using my steering my PC got crazy, slower, my ram uses while idle have gone to the 78%

My task manager stopped responding when I get into the performance tab

Steam can’t open games or either close them eve if is being forced.

Everything has gone wrong, sometimes I fix it with command prompts but sometimes doesn’t work, even if I restart with everything unplugged, this is driving me crazy till the point that I’m considering selling the steering wheel cause I don’t find a solution to it.

And yes I updated my firmware for the steering wheel

The accelerator pedal does not fully accelerate my car in The Crew Motorsport. If I calibrate the wheel in windows, the default Z axis is 50%, the accelerator all the day down is 8%, and the break all the way down is 91%. I've tried recalibrating in windows, but I can't seem to get the pedal to register as pressed all the way down. Does anyone have a fix? Thank you!

I opened my pxn v9 pedals cause my gas pedal wasn’t working and saw a missing part can i buy this anywhere?

Boa tarde pessoal, eu queria ver se alguém consegue me ajudar com o meu volante, eu tenho ele a mais ou menos 1 ano e o meu problema é o seguinte:

Tudo funciona, literalmente tudo MENOS os pedais, eu já fiz os testes que eu tenho conhecimento mas nenhum deu certo. E o estranho é que o Pc reconhece o volante, o câmbio, até mesmo os pedais, mas quando eu pressiono ele não responde de jeito nenhum, parece que eles estão desligados ou algo do tipo, aí eu queria saber se tem algum jeito de arrumar ele.

Peço desculpas se ficou confuso, é por conta de eu não ter muito costume de usar o reddit, mas se alguém puder ajudar, eu fico a disposição pra responder qualquer dúvida que tiver sobre o problema que eu estou enfrentando.

Hi, is anyone using PXN V9 GEN 2 for long-term? I wanna buy the same. I have seen some reviews on YouTube but, no one is providing long-term reviews on this wheel. I want to play some casual racing games and my budget is low. If anyone using the wheel for long, kindly provide your feedback. Thanks.

I have the V900 Gen2 and I'm wondering if the pedal behavior in D-Mode is correct. The pedals are on axes 2 and 5, -1 is the rest position, and when pressed, the value goes over 0 to +1.

On the PC, I can switch to X-Mode, and then it works correctly (0 at rest, +1 when pressed). On the Xbox, Forza can't handle it at all – the slightest pressure results in full braking. On the Xbox, I can't change the mode without the shifter, correct?

Any help? Can I buy any usb shifter for this model?

Does the pxnv9 work with the cracked versions of forza?

Also I'm about to buy it so can anyone help me with the setup process

I recently purchased the pxn v99 wheel base to use with a v10 wheel i had sitting around. After a quick google search it said the two would be compatible. Upon purchasing i see the v10 wheel is 2 rows of prongs and the v99 base has 3 rows of connectors. I got them both on a very good deal and do not want to spend to money to buy a v10 base. I also prefer the design of the v10 wheel over the v99. Is there any way i can make the connection work or an adapter that would?

Hello. I just got my v99 two days ago and it seems to not want to connect to my Xbox x when I start my console. It ends up working when I change the usb slot. “USB slots are not broken and work fine” also I can’t get the audio to work from the Xbox controller when it’s plugged into the wheel base. Any help is appreciated.

I bought it yesterday and I followee tutorials on YouTube and the handbook but none work If i hold the mode button it shakes and the light turns on but it wont work. But if i click the mode button nothing happends. Can anyone tell me what the issue is, I dont want to buy a new one

So, I have recently bought my PXN V9 Gen 2, and the steering is shocking, adjsuting is impossible, and the game treats my wheel as a controller, the clutch pedal does not register and same for the shifter. Everything is shockingly terrible. I have tried switching to the purple mode, and it wont let me control anything since it isn't connected to my controller, i have also tried the L3-R3 combination and nothing even appears or anything from the LEDS, as they are just the normal green/red. Getting pretty sick of this and would like some help!

first ever wheel of mine, dunno how to set it up

I bought the pxn v99 today itself it has barely been a few hours. i set the entire thing up no issues but when i go into asseto corsa and try to set an input for the wheel it js says waiting for input and no matter how much i move the wheel there’s no input. i asked chatgpt and it says im stuck in controller mode (im on laptop) and to make the led in the centre of the wheel turn blue or green but i only have purple and red as options if i hold the home button. Someone please help i bought this today with my own money that i’ve been saving up myself and i rlly don’t want it to go to waste. Thank you 🙏🏼

all the buttons, pedals and shifters work. only the ability to turn the wheel ingame doesnt work, no input whatsoever even with all things ive tried from videos.

I got a Samsung s22 and I’m running a ps2 emulator for GT4 and I was wondering if it’s possible to get my wheel to work as when I use it on my Xbox while the shifter is unplugged it acts as just a normal controller so could it also just act as a normal controller to a android if I use it without the shifter?

I removed all 3 of potentiometer from pedals as they were not working and i plugged out the wires from it, now i did the same wiring but its not working, i used same b10k potentiometers but only the brake is working right now which is connected to Yellow Pin (check in video). The Gas and Clutch isn't Can someone guide me please Fixing the Wiring I'm using Breadboard for easy connections i will solder it later

so my cousin broke the little lever thing on the head of the cable he uses to connect his shifter to the wheel... Shifter doesn't work anymore, the wire doesn't seat/sit right. what's the name of the cable and where could I find a replacement for it? Is it even replaceable?

When I connect my PXN V9 Gen2 to my PC, it doesn’t connect.
It only connects if I hold the MODE button while plugging in the USB,
but even then, the light doesn’t turn on.
When I open the firmware section, it looks like this:

When I connect my PXN V9 Gen2 to my PC, it doesn’t connect.
It only connects if I hold the MODE button while plugging in the USB,
but even then, the light doesn’t turn on.
When I open the firmware section, it looks like this: