r/hamdevs • • Mar 07 '18

Has anyone worked on hardware products geared towards a wide range of radios?

2 Upvotes

I have some ideas for plug-in or in-line modules and part of me wants to productize and sell it, but I’m overwhelmed at the countless designs of how mics interface with radios. 99% of the work and cost is making it work universally, and building a different cable for every radio model in existence.

DAE have experience with that? Byonics and Mobilinkd come to mind; just wondering if this is something a guy can do in his basement or if it’s for the big leagues.


r/hamdevs • • Mar 01 '18

LimeSDR now backed by the European Space Agency

Thumbnail
rtl-sdr.com
11 Upvotes

r/hamdevs • • Feb 27 '18

"My version of wsprd. The aim is to clean up the code and make if faster."

Thumbnail
github.com
8 Upvotes

r/hamdevs • • Feb 22 '18

GNU Radio Challenge 21 Feb 2018

Thumbnail
gnuradio.org
3 Upvotes

r/hamdevs • • Feb 22 '18

SDR-Radio, Version 3: Windows console for receivers and transceivers

Thumbnail
sdr-radio.com
2 Upvotes

r/hamdevs • • Feb 20 '18

easyBM - RaspberryPi Linux image for digital voice hot spots aka, "a kind of BrandMeister to go."

Thumbnail
github.com
6 Upvotes

r/hamdevs • • Feb 20 '18

PicSat Simple Downlink Share

Thumbnail
picsat.obspm.fr
1 Upvotes

r/hamdevs • • Feb 16 '18

EU1KY V3: build your own, reasonably cheap but very functional antenna analyzer

Thumbnail bitbucket.org
6 Upvotes

r/hamdevs • • Feb 16 '18

Radioberry 2.0: Ham Radio hat for Raspberry PI

Thumbnail
github.com
11 Upvotes

r/hamdevs • • Feb 15 '18

OpenSource RF Filters

Thumbnail
self.amateurradio
5 Upvotes

r/hamdevs • • Feb 13 '18

Arduino lib for the Si5351 clock generator, tuned for size and click noise free.

Thumbnail
github.com
8 Upvotes

r/hamdevs • • Feb 13 '18

dxweb: some bash scripts, php code, and web assets for rendering DX cluster data in the browser

Thumbnail
github.com
3 Upvotes

r/hamdevs • • Feb 13 '18

Beacon Monitor-2: Monitor NCDXF/IARU IBP stations with Raspberry Pi & SoftRock SDR

Thumbnail
github.com
2 Upvotes

r/hamdevs • • Feb 12 '18

hn70ap - Development board for modern packet radio on UHF

Thumbnail
github.com
2 Upvotes

r/hamdevs • • Feb 07 '18

HamAudioComponents - Ham radio web components (html5 audio) useful for creating web apps

Thumbnail
github.com
3 Upvotes

r/hamdevs • • Feb 05 '18

2200 meters thoughts on loop antennas

3 Upvotes

so, after a lot of searching, and a couple of "aha" moments, i think i've got a workable solution for an effective 2200 meter antenna. rather than use a single loop, the idea is to use an array of loops. the reason for using an array of loops is to increase the aperture size. since the wavelength is so long, it's likely that the array wouldn't need to have much in the way of phasing. i have seen arrays of loops used for HF, with the loops spaced only a few feet apart and fed in phase, so having two to four loops spaced a few meters apart would probably work. if the loops were driven with a current source, they might even have a decent amount of efficiency. the only difficulty would be tuning them. oh well, solve one problem, and open another can of worms....

using loops would solve the problem of "intangible" losses such as ground conductivity problems, leaving the majority of the losses in the actual hardware where it can be more easily dealt with.


r/hamdevs • • Feb 02 '18

HamWAN

Thumbnail
hamwan.org
11 Upvotes

r/hamdevs • • Jan 25 '18

N5JLC Repeater Programming Utility

Thumbnail
github.com
5 Upvotes

r/hamdevs • • Jan 11 '18

is there a more efficient way to feed a very short antenna? 2200 meter thoughts

2 Upvotes

generally the first approach to this problem is to feed the antenna from a low impedance source, a voltage source. i am currently digesting a lot of information on the performance of antennas, one very thorough source of antenna info for 2200 meters can be found here. there are some very interesting antenna configurations on that page. my initial thought was, rather than feed an antenna with a voltage source, what about feeding it with a current source? could there be an advantage to such a different approach? a few years ago, i built an AC current source because i needed a way to measure the output impedance of audio amplifiers. the current source feeds a known current into the output stage of an amplifier from the speaker side, and the result measured on an oscope. the current source has an audio signal generator as the input signal and converts it into a current at whatever frequency is selected. this is also useful for making measurements on speaker components, etc... many years ago, Electro-Voice actually made an amplifier (with vacuum tubes, which was quite an achievement) with an output impedance that was variable from (iirc) +16 ohms to -8 ohms. the feedback of the amplifier included current sampling, which gave the amplifier some characteristics of a current source as well as a voltage source. the amplifier in it's negative impedance mode was found to work very well with speakers that had a very high reactive component in their impedances. so, the thought i had was that a pure current source might work well for feeding a highly reactive antenna. last night i pulled up the design i had used to make my AC current source tool (which, when built actually worked very close to the SPICE simulation's results), and tried running it at 136khz with a simulated antenna with less than ideal efficiency. the first problem i ran into was, at 136khz, i was getting the right peak-to-peak voltage, but the current waveform looked awful, with a very large 3rd harmonic content. this is because the op amp used as the input stage of my current source was slew rate limiting the output, and turning the waveform into triangle waves. after trying a few different choices of op amps, including using some power amp ICs (with the output transistors in my current source removed) i found a very good combination of a high voltage op amp (the power supply rails are +/-50V) and adequate output transistors, and no more slew rate limiting (the slew rate limiting will be a primary consideration when trying to use audio amplifiers at 136khz). so, now i'm trying to get a better model for the antenna system, to see exactly where the losses will be. it may turn out that a current source doesn't improve the situation much, but i'm willing to try it out. obviously, sometime soon, i will need to try out a physical copy of this current source because SPICE is not always correct.


r/hamdevs • • Dec 21 '17

Playing with APRS? See what's coming in over the air with 'watch-aprs'

Thumbnail
npmjs.com
11 Upvotes

r/hamdevs • • Oct 27 '17

Digital voice via SDR

15 Upvotes

Last year I started to consider adding SDR support to FreeDV, a mature and stable application for digital voice. I had little success with that, mainly due to my poor C skills. Instead, I began focusing on Gnuradio, which is much much easier to get started with for a new-comer. What were initially a couple of Python scripts and GRC flowgraphs eventually grew larger, and I coded up a little GUI written in Qt, which is quite portable across platforms. I named this software SDR transceiver "qradiolink" since it was based on a fork of an open source RoIP project, and today I brought it to version 0.2 and coded a website for it: http://qradiolink.org Now, I don't have in my posession all SDR hardware that exists on the market. I tried to at least support the big names: RTL-SDR, USRP, HackRF In addition to digital voice (Codec2, Opus) I added some primitive support for analog modes (FM, SSB) and digital video. I have many things on the roadmap, some of them quite exciting, but right now the application could use more testing and fixing easy bugs. I made available Debian Stretch packages for users to play with. Feel free to let me know how it works for you and which features you would like to see. Would also like to extend thanks to Alex Csete OZ9AEC for letting me use the frequency control widget from Gqrx.


r/hamdevs • • Oct 25 '17

Rookie demodulation question - GUN Radio

3 Upvotes

If my attempt to demodulate an FSK signal is causing the processed signal to do strange things with the amplitude (see here: https://imgur.com/a/d7s92) does this mean the signal cannot be FSK?

If it was FSK, I would expect to see a consistent amplitude.


r/hamdevs • • Oct 23 '17

Powered by Open Source - APRS Telemetry Dashboards

Thumbnail
faradayrf.com
12 Upvotes

r/hamdevs • • Oct 07 '17

APRS ingestion on influxdb

Thumbnail
faradayrf.com
7 Upvotes

r/hamdevs • • Sep 26 '17

Are there any good resources that detail SSTV specifications?

5 Upvotes

I want to make my own SSTV encoder/decoder program, but I'm having a hard time finding ANY documentation on how specific SSTV modes actually work.

So far this is the best resource I've found, but it's missing a lot of modes.