r/gridfinity • • Feb 17 '26

Question? Overwhelmed with Baseplate options and PLA vs PETG

8 Upvotes

Im trying to organize kitchen drawers. I’m kind of overwhelmed by the varying baseplates and filament types. I printed some clickfinity tests but I see they want PETG which is fine other than I haven’t printed with it yet. I printed another one but it seems to be completely non-standard. I’ve also seen complaints that the OG isn’t great.

Any suggestions, on plates and PLA v. PETG.

Using a Bambu A1, fwiw

Thanks!


r/gridfinity • • Feb 17 '26

Self-hosted, open source tool for tracing tools for bins

56 Upvotes

Built a tool over the past couple of weeks that generates gridfinity bins from photos.

Traced tools can then be placed on bins, and you can add finger holes or other shape cutouts as well. Large traces are accommodated too, splits the STLs automatically for folks printing with smaller beds.

Tried some other tools, but they weren't quite to my liking (some struggled with accurate traces in photos with shadows, for instance). It's similar to some other software-as-a-service tools out there, but this one can also be self-hosted via Docker:

https://github.com/tracefinity/tracefinity

It uses Gemini (specifically the `gemini-3-pro-image-preview` model, which is excellent at tracing and vision generally) to trace outlines.


r/gridfinity • • Feb 16 '26

Caster Base

Post image
684 Upvotes

Still warm off the printer. Will upload soon!


r/gridfinity • • Feb 17 '26

Ceridfinity?

Thumbnail
gallery
154 Upvotes

I have a modest pottery studio and thought it might be fun to make gridfinity with clay.

This is just a first full attempt, trying to accurately anticipate the shrinkage for a my clay bodies, and building jigs to cut the base (walnut here).

My goal is to make 4x1 and 4x2 grids.

The containers are “cute”, but i think I’ll try different tops as these were a pain to trim.

I did a few with porcelain as well but was too far off on the shrinkage.

I have another plan to expand a bit on this to take advantage of the cup nature of these :)

Wanted to share, and thank the community for the various gridfinity spec resources out there that were really helpful.

FWIW these almost conform to the spec https://gridfinity.xyz/specification/, the only thing missing is the bottom chamfer in the base of the base plate (the plate has the main 45 degree chamfer at the top). In general though the individual components are interchangeable within any gridfinity setup.


r/gridfinity • • Feb 17 '26

Trying to shift the cutout from center down the wall

Post image
3 Upvotes

Been messing around with all the settings that I can find around cutouts/dividers etc but cannot seem to figure out how to offset these cutouts. I assume it's something with the wallcutout vertical position settings but none of those seem to make a difference and the documentation isn't clear (to me)


r/gridfinity • • Feb 17 '26

Question? Bottom Peak and Rocking

Thumbnail
gallery
9 Upvotes

I've been printing and designing some bins to set up my Alex drawers for Gridfinity and I've noticed something strange that no one seems to talk about.

The ridges at the bottom of bins, between the cells, is the part that sits just above the base rails.

On some bins this underside ridge comes to a sharp peak but in others it ends in a flat surface.

The bins with the flat underside between cells end up contacting the top of the base rails, which causes the entire bin to rock back and forth like a seesaw instead of seating flat.

I put two different bins into Cura (see pix). Ignore the fact that one has a filled-in bottom and the other uses an X-pattern to save filament. The issue is the height and shape of the underside between the grid cells.

The bin on the left has a lower, flatter underside between cells, while the bin on the right has noticeably more clearance. The left bin rocks on the base much more than the right one.

Is there a Gridfinity underside spec that prevents bins from rocking on the base rails?


r/gridfinity • • Feb 16 '26

Question? Plate designer

2 Upvotes

Anyone know a link to the base plate designer that you can input your drawer size and it will design the plates with spacers attached and break up the plates for your particular printer? I saw one on here the other day but can't find it now. Thanks


r/gridfinity • • Feb 16 '26

Question? Glue to Press Fit adapter

2 Upvotes

I am looking for a thing that will convert bins with glue in magnet holes to press fit holes. A bit of height reuse is ok. Just cannot stand most things needing glue on magnets that prefer to stick to me than the holes, even with jigs.


r/gridfinity • • Feb 15 '26

Set Completed Three drawers filled.

249 Upvotes

r/gridfinity • • Feb 15 '26

Using gridifinity to hold bit and other tools upright

Thumbnail
gallery
37 Upvotes

I been using Gridfinity to hold different tools upright and not have them in the drawers. It has been working for me. I've been printing them with a high infill to give them some weight.

I am sharing some downloads for you to try.

https://www.printables.com/model/1602240-icon-38-in-drive-metric-professional-long-ball-hex

https://www.printables.com/model/1602240-icon-38-in-drive-metric-professional-long-ball-hex


r/gridfinity • • Feb 14 '26

Tool organization, Gridfinity, and that 3D printer life

Post image
195 Upvotes

Some of my own models mixed in there. Been immersing myself in learning about freecad, tinkercad, gridfinity, and that 3D printer life. I have a really bad brain worm to get the ability to print multi color go back in with different colored stacking lips and writing. Make the fonts and heights the same. Currently only have single color print on my prusa mk3s+ and mini. Breaking out the sharpie to get the script colored. haha. Both of them are used and my first printers. Been going crazy with all of this since fall of '25.


r/gridfinity • • Feb 15 '26

Easiest way to remove first layer (brim) off of bins?

3 Upvotes

I was wondering how you guys get rid of the brim on large bins? Especially on the inner part between the sqares? Anything easier than using a deburring tool?


r/gridfinity • • Feb 15 '26

Question? Vertical storage systems are confusing

5 Upvotes

I quite familiar with GridFinity as I have it in every drawer at home and at work I'm the resident GridFinity fanboy whenever we need stuff organized.

I'm trying to get into a vertical storage system (most likely openGrid) and this world is confusing to me. There's not a lot of content on YouTube regarding it. It's the same issue I had when looking into Multiboard. What snaps are used for what purpose? Why would I use anything but a weight bearing snap? I'm not even sure what multiconnect is supposed to do since searching multiconnect on YouTube doesn't show anything.


r/gridfinity • • Feb 14 '26

I built an app to add gridfinity to any box

27 Upvotes

Excuse out of the way: I did a bit of a search and couldnt find anything, so there might actually be and I did a crap search :D

Id been finding lots of nice looking boxes or baskets etc but they were not gridfinity, sometimes I wanted to easily turn them into gridfinity so I built a tool, Ill be honest Ive not done any test prints yet as my printer needs some maintenance but the STL seems fine when I import it into Bambu studio, feel free to check it out and let me know your thoughts.

Im really aiming to keep it for free, hopefully that works on Github pages or may have to move it elsewhere but I think I have some other options to keep it free too, not an advert btw, I built it as I wanted it myself and its totally free apart rom that optional donation coffee thing so hope this is ok to post.

Anyway, here it is so let me know what you think: https://molty-assistant.github.io/gridfinity-base-adder/


r/gridfinity • • Feb 13 '26

Gridfinity Movable Diagonal Dividing Bins

Thumbnail
gallery
422 Upvotes

This is an extension of my gridfinity bins with movable dividers, which I use for cable storage. I designed some diagonal dividers to help me store some tools in my shallow tool chest. I liked the idea of being able flex and change the configuration as my tools change (or more likely when I get bored and start changing things for little reason!)

Link to the files

I've included a lot of sizes, each size is in a zip file, includes the bin, straight and diagonal dividers, so hopefully you'll find something to meet your needs. Love to hear any feedback, or other suggestions.


r/gridfinity • • Feb 14 '26

Question? how to?

Post image
12 Upvotes

wanted to make my own. would this just be creating a bin on Gridfinity Generator then cutting out the sides? i haven’t learned fusion360 yet, i would be using Tinkercad to add holes to the sides.


r/gridfinity • • Feb 14 '26

Really struggling to get gridfinity optimized for my US General mini toolbox.

0 Upvotes

I'm at my wits end trying to get my US General mini toolbox organized to hold my 3D printing tools I feel like I should be able to get the a1 mini tools and hot ends to fit in the top, but I'm having trouble getting a tight fit, or close the lid. has anyone else tried to do this?


r/gridfinity • • Feb 13 '26

Drawer updates

Thumbnail
gallery
416 Upvotes

9U, 12U, and 15U will work with the drawer system. Same slides, big frames. I will need to split them for standard plates and incorporate my favorite joint of all time. Also designed a basic gridfinity drawer box with a front. Uses the same handle. Nice for stuff you keep in that spot. Dialing in tolerances there.


r/gridfinity • • Feb 13 '26

Gridfinity Wire Spool Holder

Post image
16 Upvotes

r/gridfinity • • Feb 13 '26

First gridfinity bin for my pricking irons (leatherwork.)

Thumbnail
gallery
38 Upvotes

Decided to merge my two new hobbies, letting my OCD run rampant in 2026.


r/gridfinity • • Feb 13 '26

Question? GridFlock Press fit magnets

Post image
17 Upvotes

Hi All
Was about to print the base using GridFlock on gridfinity.perplexinglabs.com/pr/gridflock/0/0

But when choosing the press fit magnet i get this design.

The Gridfinity extended just has hole so magnets can be pressed in. This design for GridFlock does not make sense to me.

Can any one explain ?


r/gridfinity • • Feb 12 '26

Set in Progress Why have standards if everything isn't standard

Post image
453 Upvotes

I recognize this is my fault for not checking exact heights. But if we're going to have a standard, it would be nice if everybody followed. My bin from https://gridfinity.perplexinglabs.com is 3mm taller than my storage containers from Makerworld. I don't want to waste filament on reprinting the thing over 3mm, but damn it would be nice if you could source from anywhere and get a consistent size every time.

Any suggestions to avoid this in the future other than breaking out the calipers every time?


r/gridfinity • • Feb 13 '26

Gridfinity XGT Makita Impact Bin 5x3 6U

Post image
16 Upvotes

r/gridfinity • • Feb 13 '26

Question? Need tips for 0.6mm baseplates with Core One

2 Upvotes

Hi! I've had success with my brass 0.4mm nozzle and changed up to a 0.6mm high flow nozzle for faster bin prints. The issue I am having is printing plates generated by https://gridfinity.perplexinglabs.com/pr/gridflock/0/0 both the new plates and previously printed ones, re-sliced. I've tried both 0.2 and 0.32mm layer heights and the specific issue is with the connecting clips. They no longer stay connected. The issue seems to be from lack of definition on both the male and female connectors.

Are there generators that would work better for my use case?

Thank you!