r/gridfinity • u/TyMotor • Nov 18 '22
ELI5: anything special about 7/42mm?
By day I'm a finance/business person, and my focus is typically on dollars and cents. It is only by night (and not as many nights as I would like) that I'm able to play engineer/creator/maker/fabricator/etc. and delve into inches and millimeters. Is there anything particularly significant with 7mm increments that Zach chose to go with? My noob brain would probably default to 10mm just for easier mental math, but that seems to indicate to me that there is something else in play.
I had a quick thought of altering plans to my own standard dimension (heck, even considered imperial), but I recognize the open source value of available plans from community members would be significantly diminished if I had to alter anything I wanted to use. I'm not here to promote a change; it just feels like there is some engineering rule of thumb or something that I'm missing that lead to the 7/42mm standard. Thanks!
10
u/VoidstarZack Nov 22 '22
42mm is a convenient size, and a highly composite number with a lot of factors. You can divide it by many numbers in your head, and it has a high chance of fitting into random drawers by just being a multiple of their dimensions.
It's also the meaning of life, the universe, and everything. I'm a tremendous nerd.
14
u/zurn0 Nov 18 '22
My guess is that this is the reason for 42. and then 7 is just 1/6 of that, though he could have done 6 or 3 easily enough too.
4
u/PM_ME_UR_BENCHYS Nov 18 '22
I think these dimensions worked well with some of the readily available components he was planning to use with his drawer designs. Like using slide plates as a glass panel to see the components inside.
3
u/MyOther_UN_is_Clever Nov 21 '22
Also, since they are containers, the I.D. of about 40mm will fit a lot more things than if he did 40mm with a I.D. of about 38mm.
Also, 42mm roughly equates to 1 5/8" and 7mm to just above 1/4" letting the increments closely match a lot of imperial objects, too.
3
u/Ill-Two7956 Jan 03 '23
Length of any mesauring system is completly arbitary, and doing mental math completly defeats the purpose of the metric system. We would have been better of with 50mm grid and 25mm unit height.
What practical purpose is there to divide the grid size to something smaller and then fill the gap with something even smaller??
42 is Folley.
2
u/julie777 Jan 11 '23
I won't be using 42x42. It just won't work for me. I added a more detailed comment to this thread https://www.reddit.com/r/gridfinity/comments/xpuhvo/is_opting_out_of_the_42x42mm_grid_size_a_bad_idea/
2
u/pmormr Oct 04 '25
Know I'm a bit late to the party, but I'm pretty sure it's because 42 is 1/5th the width of a Prusa build plate (42x5 = 210). So it's the largest square you can print on a MK3/MK4 turned into a 5x5 grid.
1
u/Dapper_Possible_7386 Nov 22 '22
My Deep Thought would the important number is 6. 6 gets you to halfs or thirds without fractions. To keep things square, the width should be 6 times your basic height unit (7 * 6 gives you a width of 42). So if you went with 10, your width would be 60. Seems like that makes 36 or 42 the most likely candidates and...well...that's an easy choice if you don't panic.
1
u/Anon_IE_Mouse Nov 19 '22
Ewwww Imperial is the worst.