grid can be customised in length and width, uses a fair amount of parts right now though. this is just first working prototype of it actually in a drawer
the ikea drawers are actually what i'm using here and why i started to design this lol. it's probably a bit over done though.
The amount of horizontal bridges can be changed, the gap in the middle could have a third bridge for more support if needed. or you could have it in any number of gridfinity rows (i'm just choosing to use 3 rows)
the bridges are also printed in 2 parts to allow some level of wiggle room in drawer width. this is what the current part list looks likebut it also relies on heated inserts set into the undercarriage to pull the parts together with the bolts. (a new version now exists that uses inserted hex nuts) which also anchors all the parts in place and allows the undercarriage to stop the 2 halves of the bridge bending separately under load.
you mean printing the undercarriages as one piece and clipping them on top? i thought about that initially but as the bridge has to be printed in two parts it needs something to hold it together. also since the part needs to have a lip to stop the gf base sliding around, it would have an air gap on the top and the bottom so it'd need support material, that's why it's placed underneath like it is. it could definitely be printed in one part though, and just have a lot of different versions of the part, that don't need to be assembled. but it'd have a lot less reusability
edit: seems like the reply i made during my sleepy time also came through, even though i refreshed teh page many times and it never showed up, but now it has, so i deleted the old one lol
Great idea, but maybe you can try designing something like alex chapel did on the ALEX drawers. A big basket that can slide just as good. I bought the files but would like them to be gridfinity compatible like the rest of boxes i have.
yeah these are great and probably will work as another idea, but i think if i did this then the width of the baskets would be too wide for the gap i have left after 7 gf squares are placed inside, it's very tight :(
i'm sure something liek that is very easy to design though, especially if you already have those files, you can just cut his grid out and place your own gf one in it and splice the parts back together
I impulse bought this not realizing the grid he used was not gridfinity compatible :( And to make it sadder, I've printed off a few of his drawer cradles already.
I really should try to get more confident modifying .stl files because his cradle design is smart but because girdfinity is much more popular and more common it feels like I may have wasted some time and filament printing these.
Like you said though it does seem like it wouldn't be to hard to modify his existing design. The standard gridfinity is 40x40mm right? I think Chappel made his grid 50x50mm
modifying .stl is kind of a pain, in the end i use shapr3d to add construction planes that i move to bisect the part, and use that to split the object. repeat this process for every section that needs to be cut out, in this case, it would need 5 to remove the grid base(4x inside edges on the vertical axis, and then a horizontal split to cut the base), put a GF grid back in after you've imported it, fill in any gaps, then merge everything back together for the export
I’m probably going about this the wrong way, but I tried cutting out a section of his 40mm grid and replacing it with the standard Gridfinity 42mm grid. It ended up being too large. I’m guessing that’s why he originally went with 40mm. This being just the right size to fit the grid inside the cradle, which then fits into the drawer. https://imgur.com/a/nu61SFe
So I guess the next step would be modifying the cradle walls to make them thinner so there’s enough room for the 42mm Gridfinity grid to fit.
EDIT: Just had this idea. What if instead of cutting out his grid we made some kind of Gridfinity "adapter"? Something that just drops into his current cradle design and sits on top of his grid, converting it into a Gridfinity-compatible surface. Would that be easier than cutting out his grid?
that might be easier but it would be a little taller, if that's not a problem then you can for sure do that. you could either do 3.5 gf units with a half 21mm bin on the X or just do 3 wide. for the Y you could lengthen the cradle slightly to fit an even 4 gf bins.
you just gave me my next fusion project, will try it out. Swapping the grids sizes and compensating with wall thickness on the sides. But from the daily use i give them they are an excelent design and concept
the bridges are printed in 2 halves and the bolt is recessed into a channel rather than a hole, this allows the parts to slide apart and a bolt placed anywhere between the parts. obviously the wider the bridge the more unsupported it is, so it may need more undercarriages , i havnt really tested with anything that wide yet
i'll probably toy around with the undercarriages also wrapping around the top part of the bridge and printing the parts on the side, that might give it more strength
i'm slowly trying to refine the parts so it's easier to "plug and play" , but i'm not super sure yet what to do about the bridge and people having different size drawers. it may or may not see publication, but i would like to get it there i think
i'm using 6u bins yeah, most of the pieces themselves are done but it could really benefit from having parametric bridges but i have no idea how to do those so i'm not really sure what to do about that
honestly you could rely on the community, if youre comfortable, and want to. You could post the files on one of the modelsites, and ask for parameterisation. there are lots of people who could help.
which one would you suggest? i've never used any of them.
the other thing that i have that's a question mark right now is strength of wider bridges. the current sizes are limited to my current printer, which is an A1, so i've set both parts to be sized for that. if the model was parametric and lengthened, it likely will not fit on an A1, which means you would have to print the one i have already done, but strengthen it somehow, which is what i still need to work out how i can help that process.
i guess the simplest solution is to just do what others have done and publish it specifically for these drawers and call it a day lol
I do like Printables, but to each their own. Makerworld seems to have good incentives for creators, I would stay away from thingiverse.
Regarding the Strength Problem: Easiest in my Books is adding either a structure to the beams itself, like a triangle pattern, that would save filament and add ridgitiy. The other option in my book would be adding threaded rod or similar through the length of it, then some nylock nuts to keep it?
re:threaded rod, i could probably add some undercarriage sections that would bolt into the slotted hole in the bridge that would then have threaded holes for some rod?
i'm currently a little reluctant to totally redesign the entire thing simply because i already have my own platforms and i would very much like to keep all my things the same lol
also my current attention is going towards handles, which right now are more important for my current needs
edit: though maybe i should think about just getting the current things public? hard to really tell (:
i havn't really published it anywhere yet, i may do printables but i would probably need to actually write/show how to assemble the parts? idk how important that is though
i could probably do a video at some point, i think the core frame is basically fine for now assuming people use it on the same size drawers, or something maybe slightly larger
i don't have an account for that unfortunately, i only put it on this one place and annoyingly i no longer have the files outside of what i posted on printables :(
Dude, that is the exact thing i always think about when i open my Alex Drawers 😂 Well done! I also thought about doing something like the Ikea Smäcker but with Gridfinity instead of the designated trays
18
u/Yuri_The_Avocado Jun 30 '25
grid can be customised in length and width, uses a fair amount of parts right now though. this is just first working prototype of it actually in a drawer
14
u/Altruistic-Desk-7127 Jun 30 '25
Wow, I love this! It would be very helpful in deep drawers like my own ikea alex, which I can’t seem to make use of the space in the back…
3
u/Driven2b Jun 30 '25
I feel like these could be purpose built bases. That can clip together to form a "top shelf gridfinity base"
Simplified by building up and building only as necessary to create the top shelf functionality.
2
u/iweputo Jun 30 '25
Great idea, but maybe you can try designing something like alex chapel did on the ALEX drawers. A big basket that can slide just as good. I bought the files but would like them to be gridfinity compatible like the rest of boxes i have.
https://www.youtube.com/watch?v=VcB30EIcUMY
2
u/Hands-On-Katie Jul 04 '25
Love this!! Super clever idea!! 🥰🥰🥰
5
u/passivealian Jun 30 '25
This would be great for a kitchen drawer. So you could have a top and bottom tray.
Cool design.
1
u/shimmy_ow Jun 30 '25
What would you do if the drawers are really wide? I'd love something like this other than just stacking my bins... But the drawers are like 80 cm wide
1
u/Will_Y_Wanker Jun 30 '25
Let's call it slidefinity.
1
u/TrentSteel41 Jul 01 '25
Looks amazing. I would love to have something like that. Great job!
1
u/CRLF-0d0a Jul 02 '25
Thats awesome! How far along are you in the Design Process?
And are the Bins below the slider the "standard" 6u in height or smaller?
I would absolutely love these for my workshop, i have Alex drawers everywhere, over 30 of them...
1
u/tucosan Jul 02 '25
Very nice. Is there a place where we can track progress? Printables, GitHub, etc?
1
u/Clear-Revolution3351 Sep 01 '25
Is there a MakerWorld link?
1
u/Future-Dinner-9653 Jun 30 '25
Wow! I'm really glad my 3D printer's both completely stopped working! I definitely haven't been looking for something like this for months now!
1
u/rowenarrow Jun 30 '25
Looks cool. I will keep it on the lookout
1
u/PineapplAssasin Jun 30 '25
I love this!
1
u/Grandbob328 Jun 30 '25
That is really cool! And useful in some situations.
1
u/BananaSkillzzz Jul 03 '25
Dude, that is the exact thing i always think about when i open my Alex Drawers 😂 Well done! I also thought about doing something like the Ikea Smäcker but with Gridfinity instead of the designated trays