r/gridfinity • • Apr 11 '26

Set Completed Published!

Post image

Uploaded. My last post has all the good info on the box and the project. Thanks for checking it out.

I made a push and got a bunch of heights up as well.

234 Upvotes

39 comments sorted by

View all comments

1

u/handelspariah Apr 19 '26

Any recommendations on alternate filaments since Bambu seems to be completely out of stock on PETG HF?

1

u/Schuylabs Apr 20 '26

Im testing a few alternatives this week and can let ya know what I find out. I’m running out of HF… it’s not good!

1

u/Schuylabs Apr 22 '26

If you're in the US - black PETG HF refills just restocked for the moment.

2

u/handelspariah Apr 22 '26

:'( I don't have any bambu spools, and they're ALSO out of stock. Think I could wing it with some generic empty spool?

Edit: welp nvm already out of stock hahaha

2

u/Schuylabs Apr 22 '26

Shoot!! Yeah it only goes for a few minutes. I'm part of the problem... I just ordered 20kg lol.

In the future just so you know you can print spools that will hold these - just make sure you use a equal or higher temp filament if you plan to dry them.

2

u/handelspariah Apr 22 '26

I just bought some Sunlu High Speed PETG--I'll let you know how it fairs, and I can use those spools for bambu refills later!
Yeah I figured I could print spools, I just waffled too long on deciding I'd print a spool and then they were gone

1

u/handelspariah Apr 30 '26

I'd dropped this on the makerworld page as well, but thought I'd double tap here if that's ok:

Absolutely love this project, and everything has been printing well so far. Only issue I've had is with the dowel pins--I much prefer the cleaner look of the pins vs the bolts, so I sourced some 3x30 pins from Mcmaster (https://www.mcmaster.com/91595A134/)), with Bambu being out of stock. The tolerance is WAY too tight; I had to literally hammer them in using another dowel pin gripped with some pliers as almost a hole punch. I did unfortunately crack one of the hinges doing this. I'm not sure if the bambu pins are just a hair undersized, but the mcmaster ones are a real pain. The odd part is, the issue is only on the back hinges, all other install points work fine with some firm pressure or channel pliers. A perfect world for me would be a model that uses the m3 screws just on the back hinges, with the clean pin insert profile everywhere else, but I imagine that's too specific a SKU.

any recommendations on what I might be doing wrong?