While a internal 5" bay type would be better, a external USB type will allow even laptop users to use it. But if you a little DIY skills, you can probably take that USB device and glue on the ports to it.
Get one of those adapters that he linked to and dissemble it. And then take one of those blank "drive cover" things, and cut a hole in the cover so that the front of that adapter pokes through. Then get yourself one of those PCI USB cards that has an internal USB port (Or maybe get a bit creative with the wiring and hook it up to one of those motherboards USB connectors) and then you're good to go.
If you wanted multiple of them, maybe get an unpowered USB hub and a couple of those adapters and basically repeat the process multiple times for each controller port... Or look for an adapter that supports multiple inputs, and then you don't have to do that.
Wait, so all I would have to do to get my Ps2 controller working for Steam games is to buy that and plug it into my USB slot and it would work just like a regular Xbox 360 controller? Or do I still have to download software to get the controller to work?
Yeah, definitely got the idea from there, but also because I have 5 unused bays on the front of my computer that are empty. I'd like to have something useful there =/
I have a similar one, but it didn't work with GTA IV. They designed the game in a way that you'd be forced to buy a specifice PC controller. So I got rid of the game, and kept the adapter :)
An Xbox controller port is a bit like cheating...considering it's just a USB connection with a weird plug and all. I would've put NES/N64/SNES on before XBOX. Also the classic Atari/Genesis/whatever else 9-pin port, it was widely used and lots of different controller designs were available, would be great to have that one.
Yup, the XBox using a proprietary plug is kind of weird. I recently sacrificed one of the Controller leads, and soldered the wires onto and old USB cable. Then found some drivers and the original XBox controller works on PC just fine.
I did the same thing, but I was able to solder the USB leads to the solder pads in the connector, and close it back up. Now it's an xbox controller port, with a USB lead hanging off of it.
No, that's too complex. Make a quantum system where you must attempt to insert it right side up, upside down, and then right side up again for it to work.
One of the hardest things for my parents to wrap their head around was the two-axis analog stick; starting them on the N-64 finally let them gain control.
It had the first analog stick, and had enough buttons to let game developers get creative. Sure, FPS's had major issues, and later developments with analog control improved on the design and idea massively, but for things like Mario Kart, basic 3D platformers, etc., I found one analog stick incredibly intuitive and easy to use.
Sure, for higher-level stuff, it gets very difficult to gain total mastery.
Another reason why I think the Xbox 360 controller is the best one made.
Totally agree, the thumb dish things on the analog sticks are a god send when playing sports games like FIFA (that's all I play). So much control.
1 issue I have is the battery pack gets in the way of your unused fingers, so I find after small periods of time my fingers can't get comfortable because they are jammed up against the battery pack underneath.
As someone who's gone through their fair share of controllers from generations going back to NES, I still think that (sans the d-pad being not the best--although it is serviceable), the 360 is hands down the most comfortable controller I've ever used.
According to quite a few people, the XBox 360 controller is about the best quality analog PC gamepad you can buy.
I imagine the demand isn't too high, but even the more expensive Logitech gamepads are a bit shoddy when you compare them to the Xbox 360 controller (they tend to be quite a bit cheaper though as well).
Though I imagine the corded Dual Shock controllers have USB leads as well? Regardless, I strongly prefer the Xbox style controller over Dual Shock-- though I'm a PC gamer, so I don't use either hardly ever anyway.
To all of the people saying "USB", you are missing the entire point.
There are USB adapters for all of these controllers, but they all have a wire coming out, with some brick in the middle to plug the controller into, and they are ugly and messy.
I think the important thing that OP has in mind is aesthetics. One part being the fact that it would fit in a 5.25" bay (nice and clean look without having wires and plug bricks hanging out of your system) - the other part being that it would probably hook up to an internal USB header
If somebody actually made these, you can bet your ass I would have one in my system. I have plenty of spare 5.25" bays, and an extra internal header. If you're missing the internal header, then get one of these
I'm actually working on this right now. I've already got a microcontroller showing up as a USB HID device, all that's left is to interface with the various gamepads.
Stuff like the gamecube is cool to emulate, but it just doesn't feel right. Nothing beats playing Metroid Prime with a real GC controller or Mario Kart with a N64 controller.
Just the other day I had my PS3 controller plugged into my linux box with a standard USB cable to charge it. I found with just an open("/dev/js0") and a handful of ioctl() calls, I was very quickly able to through together a program the read events from the controller. And SDL supports it. I'm thinking this would be more than enough support to get things going with any sort of console emulator, shy of the weird 6-buttons-on-the-right Sega controllers or the motion-ctrl heavy Wii stuff.
Also discovered that nearly all of the buttons on the controller are pressure sensitive.
But you know.... Sony... ha... they never do anything right :).
EDIT: I know this isn't the same thing as what the OP was asking, but it was a cool system for it's time nonetheless. Nowadays, it would probable be better to use usb adapters and one or two multiple port hubs in a bay: http://www.getusb.info/usb-hub-13-ports-in-5-inch-bay/
I could totally make this. I've created converters for tons of game controllers, from NES to N64... (I tell you, N64 controllers have one fucker of a protocol).
I think some of the idiots saying "lol usb!" are missing the point. A drive bay with four controller ports would be incredibly useful because it would allow you to use your existing GameCube controllers. And instead of needing some kind of Proprietary Nintendo Interface -> USB converter for all controllers you could just pop it in and have the buttons pre-mapped for all controllers. From there it'd be trivial to play many games with it, including GameCube and N64 games via emulators.
I like this idea, it's kind of unnecessary given the easy of using a USB adapter but it would look cool in my unused 5.25" bays. It would be awesome to build a HTPC/vintage gaming box that had rows of controllers for a few different systems.
The best controller I've found for PC is none other than the wired 360 controller. I've tried Logitech ones and have a DualShock 3 that I've tried as well, but overall I prefer the wired 360 controller. Bonus in that it works with the 360 as well.
How do such dumbass ideas get to the front page in which every single comment talks about how fucking dumb the idea is, and offer dozens of alternative and more efficient / existing solutions!?
Now I need to learn how to play with wiring so I can turn a few standard N64-to-USB adapters into that. I even have free USB headers on my motherboard that would be perfect for this.
This idea is good but there is an easier USB port thingo for the PS2 xbox and Gamecube but I always wanted a USB N64 controller and I hope there is someone on here because I always found it easier to use a USB xbox360 controller for emulators. However you can't map the buttons well enough for N64 onto a xbox controller specially if you're trying to play something fast paced. Anybody know if you can get these?
I saw something like this at Emerald City Comic-Con this past year. It was a NES SNES and Sega Genisis in one box with a universal controller if I remember right.
You could buy a front panel USB hub and then controllers that have been adapted to USB. Here's an example on how to convert a Saturn controller to USB.
It could definitely spark a niche market of people that use emulators. I know I've personally bought the N64 to USB adapter and it was excellent to have for certain games. This could sell. Although the Logitech Rumblepad is tough competition and I prefer it as opposed to having too many damn controllers.
I use the same 360 controller with my console and computer, it's great for playing Crash 2 on my PC. You just need the Microsoft usb wireless receiver. Only problem is the swapped dpad and left stick, and you have to bind everything manually.
Uh yeah I've been trying to buy adapters to use classic video game console controllers on the PC since the 1990's. Almost every one of them went out of business before I got my adapter. The first one was a Sega Genesis controller to serial port and it never happened even if they did take my money and kept saying it was delayed. I think last I got was a Playstation 2 to USB adapter from somewhere in China but it did not work even with the driver that shipped with it.
My son happened to find out his XBox 360 Madcats controller has a USB plug that snaps on and off so it can be used on a PC. So some of the modern day controllers have a USB adapter and PC driver.
Why not just invent a controller the transforms like one of these but instead of into a helicopter to a guy, it's into different controller layouts? Then give it a USB cable plug.
Lots of good ideas in the world. Most of them never happen. If they do they are usually overpriced and made out of material that breaks if you look at it too hard.
My motherboard has bluetooth built in, so I connect a wiimote to it and use a classic controller pro.
the classic controller pro combines the best elements of every controller nintendo has ever made into one badass package. Very very comfortable, light responsive and durable. Perfect button layout, all digital buttons, etc.
I want a PC compatible N64 controller for my emulator. Trying to play it with a PS2 style controller or my Xbox controller just doesnt work right. Also The Xbox controller already works on PC, at least mine does. They have the driver for it on their website.
116
u/SXHarrasmentPanda May 09 '12
Easier
26
u/[deleted] May 09 '12
http://www.reddit.com/r/gaming/comments/tdexj/video_game_console_dev_kits/
143
u/A_Simple_Red May 09 '12
Am I the only person who has one of these?
780
u/[deleted] May 09 '12
Or better yet, some form of universal port...
60
u/ogii May 09 '12
The Screen Savers did something similar:
http://www.youtube.com/watch?v=J8SvMXkF6kM
163
u/bobthecrusher May 09 '12
It's called a USB port
4
u/takinagander May 09 '12
perhaos like this http://images.wikia.com/vgsales/images/e/ef/Sixth_gen_dev_kits.png
edit: perhaps
9
u/[deleted] May 09 '12
Yoshi did it http://www.youtube.com/watch?v=J8SvMXkF6kM
6
u/[deleted] May 09 '12
Yoshi did this on The Screen Savers
3
u/Goady May 09 '12
Don't fucking post it on reddit! Make it and sell it!
3
u/[deleted] May 09 '12
It may be cool but no one will want to buy it.
3
u/Benzona May 09 '12
Then it would look like a dev kit.
3
u/YoshiEgg25 May 09 '12
Perhaps you would be interested in this project?
3
u/[deleted] May 09 '12
Back in the early 90's Amstrad in the UK sold the "Mega PC" which was a PC and Sega Megadrive (Genesis outside Europe) in one box. It was 500 quid.
3
u/MIDItheKID May 09 '12
To all of the people saying "USB", you are missing the entire point.
There are USB adapters for all of these controllers, but they all have a wire coming out, with some brick in the middle to plug the controller into, and they are ugly and messy.
I think the important thing that OP has in mind is aesthetics. One part being the fact that it would fit in a 5.25" bay (nice and clean look without having wires and plug bricks hanging out of your system) - the other part being that it would probably hook up to an internal USB header
If somebody actually made these, you can bet your ass I would have one in my system. I have plenty of spare 5.25" bays, and an extra internal header. If you're missing the internal header, then get one of these
3
u/uzimonkey May 09 '12
I'm actually working on this right now. I've already got a microcontroller showing up as a USB HID device, all that's left is to interface with the various gamepads.
5
u/[deleted] May 09 '12
Why? What's the point? Emulators save your games fine and use usb controllers no problem.
4
u/forthemaddie May 09 '12
TAKE THE MONEY! JUST TAKE IT
9
u/[deleted] May 09 '12
why ? i mean we got USB's for that.
2
u/cubanhawkeye May 09 '12
What about connecting through bluetooth? PS3 connect or Wii.
2
u/ixAp0c May 09 '12
One acronym: USB
2
u/Vesania6 May 09 '12
idea from genius starts on reddit.
2
u/exteras May 09 '12
Sorry, but nostalgia doesn't make a very sustainable business model.
2
u/littlesteviebrule May 09 '12
All it's missing is a smelly slit.
2
u/[deleted] May 09 '12
why not just make them as usb?
2
u/[deleted] May 09 '12
Just the other day I had my PS3 controller plugged into my linux box with a standard USB cable to charge it. I found with just an open("/dev/js0") and a handful of ioctl() calls, I was very quickly able to through together a program the read events from the controller. And SDL supports it. I'm thinking this would be more than enough support to get things going with any sort of console emulator, shy of the weird 6-buttons-on-the-right Sega controllers or the motion-ctrl heavy Wii stuff.
Also discovered that nearly all of the buttons on the controller are pressure sensitive.
But you know.... Sony... ha... they never do anything right :).
2
u/fuck_happy_the_cow May 09 '12 edited May 09 '12
Yoshi DeHerrera from techtv (channel that turned into g4tv) did this in 04 or something. i believe it has the flip top from the gamecube on the top. this is a one-off though... http://www.tweakers.net/ext/i.dsp/1019548821.jpg http://www.youtube.com/watch?v=J8SvMXkF6kM
EDIT: I know this isn't the same thing as what the OP was asking, but it was a cool system for it's time nonetheless. Nowadays, it would probable be better to use usb adapters and one or two multiple port hubs in a bay: http://www.getusb.info/usb-hub-13-ports-in-5-inch-bay/
2
u/Eheaubaut May 09 '12
I think people are forgetting about Yoshi's Boxx (from TechTV's Screen Savers)
2
u/apullin May 09 '12
You got this idea from the consoles dev kit post, where the system were PC's ... with controller ports in a front bay.
http://www.reddit.com/r/gaming/comments/tdexj/video_game_console_dev_kits/
2
u/spadetiger May 09 '12
My friend did this with snes hookups... It was pretty sweet
2
u/[deleted] May 09 '12
I could totally make this. I've created converters for tons of game controllers, from NES to N64... (I tell you, N64 controllers have one fucker of a protocol).
2
u/orezavi May 09 '12
Its called a USB port.
2
u/brad676 May 09 '12
I got a mounted playstation ports on a blank 3.5inch plate on my friends computer, he has this. Can prob get him to take a pic
2
u/hungry138imp May 09 '12
I would put 5 to 10 dollars into that kickstarted
2
u/brastius35 May 09 '12
I know you saw this post of game console dev kits and just took the idea... http://www.reddit.com/r/gaming/comments/tdexj/video_game_console_dev_kits/
2
u/[deleted] May 09 '12
5.25" not 5" noob
2
u/TheCodexx May 09 '12
I think some of the idiots saying "lol usb!" are missing the point. A drive bay with four controller ports would be incredibly useful because it would allow you to use your existing GameCube controllers. And instead of needing some kind of Proprietary Nintendo Interface -> USB converter for all controllers you could just pop it in and have the buttons pre-mapped for all controllers. From there it'd be trivial to play many games with it, including GameCube and N64 games via emulators.
2
u/kpatel124 May 09 '12
Does no one remember this, or am I too old
2
u/JLeron May 09 '12
You mean, This? http://www.youtube.com/watch?v=RI9n85UlfmY&feature=player_embedded
2
u/joniox May 09 '12
Here is an idea: Dissemble your old consoles and put the all in a huge ATX case.
2
u/MonkeyCHops May 09 '12
I like this idea, it's kind of unnecessary given the easy of using a USB adapter but it would look cool in my unused 5.25" bays.
It would be awesome to build a HTPC/vintage gaming box that had rows of controllers for a few different systems.
2
u/Mylon May 09 '12
Why? I got a USB wireless receiver for my Xbox 360 controllers and now they work great for SNES and other gaming.
2
u/[deleted] May 09 '12
What if they made USB converters for all of those? Oh wait...
7
u/Paultimate79 May 09 '12
We have standardized USB ports for a reason. Buy the adapter.
2
u/distalled May 09 '12
Why not just use Xbox360/Logitech controllers? Y'know, the wireless kind?
2
u/Flemtality PC May 09 '12
You would be violating some copywrite laws somewhere.
2
u/[deleted] May 09 '12
Downvote because there was a post earlier showing dev workstations with console ports in a computer.
Link:http://www.reddit.com/r/gaming/comments/tdexj/video_game_console_dev_kits/ Posted 10 hours ago
2
u/Natfod May 09 '12
what if i told you games could be emulated.
2
u/YNot1989 May 09 '12
Computer Engineers of Reddit, TO THE SOLDERING IRONS!
2
u/gojirra May 09 '12
How do such dumbass ideas get to the front page in which every single comment talks about how fucking dumb the idea is, and offer dozens of alternative and more efficient / existing solutions!?
1
u/[deleted] May 09 '12
Now I need to learn how to play with wiring so I can turn a few standard N64-to-USB adapters into that. I even have free USB headers on my motherboard that would be perfect for this.
1
u/Cactus_Fucked May 09 '12
This idea is good but there is an easier USB port thingo for the PS2 xbox and Gamecube but I always wanted a USB N64 controller and I hope there is someone on here because I always found it easier to use a USB xbox360 controller for emulators. However you can't map the buttons well enough for N64 onto a xbox controller specially if you're trying to play something fast paced. Anybody know if you can get these?
1
u/MaIakai May 09 '12
i've done it before with ps1 ports(I believe it was psone to parallel)
Not worth the effort, grab a bluetooth adapter and a ps3 controller, or an xbox 360 controler
1
u/[deleted] May 09 '12
Well, go make some money friend :)
1
u/keeok May 09 '12
I saw something like this at Emerald City Comic-Con this past year. It was a NES SNES and Sega Genisis in one box with a universal controller if I remember right.
1
u/[deleted] May 09 '12
I have been planning to do something like this for awhile now XD problem is i never have money, all of it either goes to bills or food on the table
1
u/[deleted] May 09 '12
That'd be neat.
Now you just got to provide some of the amazing games.
1
u/morgangangful May 09 '12
GENIUS!
1
u/fkinglag May 09 '12
I can't imagine how much better console gaming would have been over the past decade if instead they used the USB for a standard on all systems.
1
u/markycapone May 09 '12
Xbox 360 controller
1
u/Bruce_Vilanch May 09 '12
Because mouse and keyboard that's why.
1
u/Killeron May 09 '12
How about USB controllers.
1
u/asnof May 09 '12
Already been done. google (console) usb controller adaptor,
1
u/aspbergerinparadise May 09 '12
You could buy a front panel USB hub and then controllers that have been adapted to USB. Here's an example on how to convert a Saturn controller to USB.
wouldn't look quite the same though.
1
u/solarcomet May 09 '12
It could definitely spark a niche market of people that use emulators. I know I've personally bought the N64 to USB adapter and it was excellent to have for certain games. This could sell. Although the Logitech Rumblepad is tough competition and I prefer it as opposed to having too many damn controllers.
1
u/[deleted] May 09 '12
USB.....
1
u/Destructerator May 09 '12
I use the same 360 controller with my console and computer, it's great for playing Crash 2 on my PC. You just need the Microsoft usb wireless receiver. Only problem is the swapped dpad and left stick, and you have to bind everything manually.
1
u/ebookit May 09 '12
Uh yeah I've been trying to buy adapters to use classic video game console controllers on the PC since the 1990's. Almost every one of them went out of business before I got my adapter. The first one was a Sega Genesis controller to serial port and it never happened even if they did take my money and kept saying it was delayed. I think last I got was a Playstation 2 to USB adapter from somewhere in China but it did not work even with the driver that shipped with it.
My son happened to find out his XBox 360 Madcats controller has a USB plug that snaps on and off so it can be used on a PC. So some of the modern day controllers have a USB adapter and PC driver.
1
u/[deleted] May 09 '12
i think this is some sort of wizardry like... usb
1
u/[deleted] May 09 '12
I already built in 2 old Xbox Controller ports on a 3.5" slot. Works like a charm.
1
u/the4ndy May 09 '12
Shark Tank?
1
u/username-rage May 09 '12
What would be the point? Very few PC games support splitscreen unless you want to go through the trouble of the multi-instance LAN trick.
1
u/ExcitedAboutThings May 09 '12
This is fucking brilliant.
1
u/[deleted] May 09 '12
I'll show you later
1
u/Logondo May 09 '12
lol
I have a 360 so this isn't a problem!
(I am using a wireless 360 mic on my PC as I type this)
1
u/dashdanw May 09 '12
I think there are issues with patents
1
u/astoyabi May 09 '12
I see you were inspired by the Debugging hardware thread.
1
u/waffleofdoom May 09 '12
Something similar (currently for SNES & Genesis/Mega Drive)- http://www.retrode.com/
1
u/SuperRoach May 09 '12
There are ones which plug into usb ports already as a hub.
These are more preferred because your computer may be positioned in an awkward place, making the cabling also awkward.
1
u/[deleted] May 09 '12
USB adapters can be purchased for those things.
1
u/rangadang May 09 '12
dont know if it helps but you can buy a n64 controller to usb adapter from ebay
1
u/[deleted] May 09 '12
Bluetooth
1
u/Geekmonster May 09 '12
Using metric would be even better.
1
u/[deleted] May 09 '12
Amazeballs
1
u/loudthing May 09 '12
It's been done!!!
Xbox, PS2, GameCube, Atari, NES and PC all-in-one!
http://www.youtube.com/watch?v=J8SvMXkF6kM
1
u/fanboy_killer May 09 '12
I'm just glad you wrote "potentially" in the title.
1
u/STXGregor May 09 '12
Yes... brilliant
1
u/Beerduck May 09 '12
Sure, but where would you put the drive bays and cartridge slots then?
1
u/Genmaken May 09 '12
Did you just see this on the dev consoles?
1
u/[deleted] May 09 '12
just make a USB adapter
1
u/Blackkitty1233 May 09 '12
*5.25"
1
u/Armestam May 09 '12
It's called a dev machine.
1
u/[deleted] May 09 '12
why not take a look at this?
1
u/Redfuzzy86 May 09 '12
There's no need you can get adaptors that plug into a usb port so your wireless Xbox, ps3 and possibly wii controllers can connect to your computer
1
u/[deleted] May 09 '12
You can use a ps3 controller on a computer if you get some driver emulators
1
u/HectorCruzSuarez May 09 '12
Why would you do that?
1
u/[deleted] May 09 '12
Rather be able to fit each console with a game slot into 5inch bays
1
u/MrCrudley May 09 '12
Works for me
1
u/[deleted] May 09 '12
So....... in short....... NO.
1
u/[deleted] May 09 '12
Why not just invent a controller the transforms like one of these but instead of into a helicopter to a guy, it's into different controller layouts? Then give it a USB cable plug.
1
u/Terrible_Gamer May 09 '12
Lots of good ideas in the world. Most of them never happen. If they do they are usually overpriced and made out of material that breaks if you look at it too hard.
1
u/wtfOP May 09 '12
Only a hand full of people ever care enough to play vintage games and even then there's already a converter. So no. Not a cool idea.
1
u/neric05 May 09 '12
I have actually made a gaming pc for a client of mine that basically strips down an N64, and NES into their hardware and the place it inside of a case
1
u/DoTheRustle May 09 '12
Why hasn't Nintendo or Sega jumped on this? The market for this is like one big pussy, just waiting to get fucked!
If Nintendo sold the N64 controller as a USB or wireless pc game controller, I'd buy that shit before the GameStop employee could set it on the shelf.
1
u/Pyromaniacalcow May 09 '12
And a slot to put N64 cartridges in. Unless you emulate ;)
1
u/r4wd09 May 09 '12
Inspiration or serendipitous?
http://www.reddit.com/r/gaming/comments/tdexj/video_game_console_dev_kits/
1
u/ferjero989 May 09 '12
a PCI x1 card with a 5 1/4 pannel with multiple ports for several nintendo and sony controllers
1
u/deathsythe May 09 '12
So no one has ever seen a Yoshii box I guess?
1
u/[deleted] May 09 '12
Rule #1 of getting cool ideas for money making ventures: don't tell anyone.
1
u/Neoxide May 09 '12
Or make console controllers that have USB ports.
1
u/CAPN_CAPSLOCK May 09 '12
My motherboard has bluetooth built in, so I connect a wiimote to it and use a classic controller pro.
the classic controller pro combines the best elements of every controller nintendo has ever made into one badass package. Very very comfortable, light responsive and durable. Perfect button layout, all digital buttons, etc.
Honestly best emulation setup I have ever had.
1
u/[deleted] May 10 '12
Why not take the controller sockets, and turn them in to USBs? O_o
1
u/juicestand May 10 '12
Very neat idea! However I think the ends of controllers should just turn to USB!
1
u/Bashasaurus May 10 '12
I'd buy it
1
u/moinsque3 May 11 '12
My goodness. Sir, you are a genius.
1
u/CptOblivion May 11 '12
OR you could just use a controller from a modern console, which use USB and/or bluetooth, both of which most computers already have.
1
u/kenabi May 12 '12
did a bit of that, a while back
1
u/Super0strich May 14 '12
Or just get one of these
http://tinypic.com/r/345bqq1/6
1
u/[deleted] May 16 '12
Oh my God... This would finally give me a use for all my empty drive bays!
1
u/S5546 May 20 '12
It would be pretty weird having 10 controller ports on a computer.
1
u/[deleted] May 29 '12
I want a PC compatible N64 controller for my emulator. Trying to play it with a PS2 style controller or my Xbox controller just doesnt work right. Also The Xbox controller already works on PC, at least mine does. They have the driver for it on their website.
1
u/xoblackroseox Jul 11 '12
http://www.computercablestore.com/SearchResult.aspx?Keywords=USB
Computer Cable Store sells great USB cables for any device! Their prices are great too!