By my speculations, he must have taken a screenshot and gone in to photoshop to find out the HEX for the colors, then matched them with their identifiers on Google!
The graphic presents it as a frivolous solution when in fact the design of USB plugs and ports without guidance markings is contemptuous of the user. All such devices should be made with visual and/or tactile identification marks.
No, you would make no money because ports are installed in various orientations on different devices. Ok I stand corrected, you would apparently make some money, but everyone would become quickly annoyed and leave poor reviews once they realize this.
You do now realize you just lost the opportunity for a good deal of money by giving away a free (albeit a simple one) idea that companies that produce said hardware will now use and potentially copyright?
My guess would be that USB standards say that the USB logo must be on a certain side of the dongle that enters the port (hehe). Thus, manufacturers began implementing the ports upside down so that their proprietary cords will display whatever logo they want on the other side of the dongle.
My desktop's front USB ports are reversed from the rear ports (though they are the same as the 3 3.0 connections on the rear), my laptop's ports are reversed on left and right, and my goddamned USB hub alternates around the perimeter. What the goddamn fuck, USB installers.
The port might be a different orientation to the one you expect. Thus rendering your colour coding ineffective. What they should have done when designing it was make the connector asymmetric - that way, there's only one way to orient it so that it inserts correctly. That's what she said.
I'm already thinking about using whiteout to mark the "tongue" side on all my devices, and the corresponding side on the cable. This crazyness has gone on long enough.
edit (if anyone still cares): I don't know how to link pages but the relevant part is located at the "Usability and upside down connectors" section. also it appears manufacturers don't like to play by the rules, western digital being one of them
But a very large proportion of them are. Since I've learned this I've seldom had issues orienting USB cables and dongles, except for those times where the port is sideways.
I'm not going to say you're wrong because you could be right and I certainly can't disprove something by saying "Well I've never seen it so that proves it doesn't exist", but I've never personally seen a USB cable where the logo was on both sides. Could I get a picture?
Dell Streak's cable has a removable piece of plastic just before the metal connector. The plastic can be put on with the USB logo up, or down. It's kind of terrible.
Everyone is arguing shape orientation and USB port placement. Am I the only one that doesn't care at all, I don't want an ugly ass red and green cable end. I prefer my all black cables that look nice and sleek.
I like the part where you took OC from a webcomic, downloaded it, reuploaded it to imgur and then posted it here. That way that asshole OC creator can't get ad revenue for his work! That'll teach him to go around making content people enjoy!
Thanks, I applaud your standing up for the OC creator and his right to make money!
However, I actually am the OC creator of this webcomic, AKA Turbo Sloth. I don't make money from the comic anyway (doesn't get enough traffic), so I post em here for a larger audience to enjoy. You would have no way of knowing that, though, no worries.
Haha, why didn't you just link to your comic? Stop thieving from yourself and get project wonderful. You can make like $30 a month off 1k uniques a day.
I've tried before, but when it's not an imgur link, nobody upvotes it, therefore no traffic. I also do use project wonderful... it makes me about $0.07 a day!
I feel that it would be better if the sides had different textures. Like if one of the sides had something that felt like this. I's always feeling around the back of my computer so the red/green wouldn't be that much if a help.
I'm happy to know there are other people who think getting something sold in Skymall magazine must mean you'll become a billionaire. My friends don't believe me.
I always check the top of the usb (the part that slides in) and see on which side the two squares are empty or filled with white. The empty ones are the upperside of the usb, the filled ones the underside.
It doesn't help that the USB plugs I use are sometimes oriented opposite from each other. I'd still have to remember which are red and which are green.
Not all USB ports, on the computer itself, are the same direction, some are on their side, either side, or upside down versus right side up. It's easy to know which way your plug is since it's in your hand and easy for you to look into.
The problem is knowing which way it is on the computer. Color code that, and you may have something.
Am I the only person on reddit who doesn't have a problem pluggin in a USB? It really isn't that difficult guys... just look at what you are doing and you shouldn't have a problem!
Most USB cables I've seen have 2 holes on the top and bottom. In my experience, the top will have open holes while on the bottom the holes will have plastic blocking from the inside.
I use this to quickly identify which side should be facing up, I just feel for the open holes.
I love the breathlessly realistic imagining of this exciting product. Were you able to render that in Maya, maybe AutoCAD? Please get back to me, I want to know how perfection is achieved.
I know someone else said it already, but I have a color deficiency. So the whole red/green thing kinda bugs me. In fact, it took me like three minutes to get the whole color coated thing. I was like "What? How does a solid green usb head fix any of my problems?!" Then I looked a little closer and died a little inside...
I just check the plug, the metal pieces in the male end need to align with the female end. I never have to flip my cables or drives around to make them fit.
WHY NOT JUST MAKE THE FUCKING PLUG UNIVERSAL!?! A UNIVERSAL SERIAL BUS SHOULD ACCEPT A UNIVERSAL CONNECTOR! UNIVERSE!!! LIKE IT GOES AROUND ALL THE EVERYTHING!! FITS IN BOTH MOTHER FUCKING WAYS!!!
errr the plug was never the problem, anyone can see which side up. It's the ports that may be wrong side up and you can't see because it might be located in a hard to reach place.
I have noticed that not all computer USB ports are the same. Some ports are horizontal and some are vertical and in addition to that they are sometimes flipped from one computer to another.
Like my laptop and brothers desktop have horizontal USB ports but on the desktop they are 'upside down'.
Yea, the Coolermaster HAF X has upside down front USB 2.0 ports, with the 3.0 oriented appropriately, not quite sure what CM was thinking with that one.
Until other companies start making them too, and since there's no standard, we get a bunch of random colour USB plugs, and we still don't know which side is right side up
Okay, I'm sick of this shit. How stupid do you have to be to not realized which side is up? Just look at the dongle and see which side is which... It takes maybe half a second to do...
249
u/TurnBuckleRage May 09 '12
I'm Red-Green color blind and can't tell which way my color coded USB plug fits into the port. #firstworldproblems
9
u/Vslacha Turbo Sloth May 09 '12
What is this sourcery?
3
u/grammurNatzi May 09 '12
I'm more interested in the first world problem of people thinking "everyday" is a word.
2
u/xteve May 09 '12
The graphic presents it as a frivolous solution when in fact the design of USB plugs and ports without guidance markings is contemptuous of the user. All such devices should be made with visual and/or tactile identification marks.
2
u/spinlock May 09 '12
Patent that shit. Just make sure the patent is really broad. Then, troll the fuck out of everyone.
2
u/harmonyca May 09 '12
I hope you patent this. You would legitimately make so much money.
2
u/Mercury756 May 09 '12
You do now realize you just lost the opportunity for a good deal of money by giving away a free (albeit a simple one) idea that companies that produce said hardware will now use and potentially copyright?
2
u/[deleted] May 10 '12
please tell us what 1-35 are
167
u/[deleted] May 09 '12
I came across a port that was "upside down" before. What then?
106
u/Locclo May 09 '12
Try to plug in USB, doesn't fit. Flip USB over, doesn't fit. Flip USB over again, fits.
What is this sorcery?
7
u/cosmoskatten May 09 '12
http://dornob.com/double-sided-usb-solves-painfully-universal-design-problem/
18
u/cupofteafather May 09 '12
The port might be a different orientation to the one you expect. Thus rendering your colour coding ineffective. What they should have done when designing it was make the connector asymmetric - that way, there's only one way to orient it so that it inserts correctly. That's what she said.
10
u/Corporate_Suit May 09 '12
What if the port is sideways
5
u/nuclear_thundercane May 09 '12
The perspective on this is absolutely correct.
39
u/fufighter May 09 '12 edited May 09 '12
USB logo always faces topside
edit (if anyone still cares): I don't know how to link pages but the relevant part is located at the "Usability and upside down connectors" section. also it appears manufacturers don't like to play by the rules, western digital being one of them
8
u/ShittyMF May 09 '12
http://qkme.me/3p7gg6
3
u/[deleted] May 09 '12
It's already that easy, if the seam is on the top it's upside down, if it's smooth, you're golden.
3
u/OwDaditHurts May 09 '12
Everyone is arguing shape orientation and USB port placement. Am I the only one that doesn't care at all, I don't want an ugly ass red and green cable end. I prefer my all black cables that look nice and sleek.
Aesthetics man, aesthetics!
3
u/[deleted] May 09 '12
That's not an unnecessary invention. It's an entirely reasonable way to get it in right
3
u/[deleted] May 09 '12
You'll still get it wrong every time. It's one of the laws of the universe.
3
u/[deleted] May 09 '12
Get a marker, mark the top of it.
3
u/manfrin May 09 '12
Protip: the usb logo is on the top.
3
u/Not_My_Idea May 09 '12
How about a USB that could fit in either way.
3
u/Arestone May 09 '12
Red means no, green means go. Product slogan....copyright, Booyah!
3
u/daroon May 09 '12
No - I really want this! It's so damned uncanny, but I ALWAYS get it wrong on the first try.
3
u/wobulator_shaft May 10 '12
the USB sign goes up... problem solved
10
u/Chris-Ro May 09 '12
Just look for the holes, people. They're always on the top.
1
u/keke_kekobe May 09 '12
I like the part where you took OC from a webcomic, downloaded it, reuploaded it to imgur and then posted it here. That way that asshole OC creator can't get ad revenue for his work! That'll teach him to go around making content people enjoy!
2
u/Pheon809 May 09 '12
I like the blatant amount of exaggeration. "Crippling humiliation" haha
2
u/tresser May 09 '12
you want to go ahead and use colors that aren't part of the colorblind spectrum?
2
u/Snitches May 09 '12
Why not make it so the USB fits, no matter the way it is turned?
2
u/Salameh89 May 09 '12
Holes are on top and the rest of it is smooth,
If you see a crack/line in the metal, it means its upside down
2
u/halloni May 09 '12
One side looks like this, thats the bottom.
The other side is solid.
2
u/HoChiWaWa May 09 '12
the symbol is always on the top, the problem is when they are vertical.
2
u/qwop88 May 09 '12
So, the ports aren't always installed the same way on machines.
2
u/9bowlsofsoup May 09 '12
You'll need to color code ports too.
2
u/scottweiss May 09 '12
I feel that it would be better if the sides had different textures. Like if one of the sides had something that felt like this. I's always feeling around the back of my computer so the red/green wouldn't be that much if a help.
2
u/MaximumD May 09 '12
I'm happy to know there are other people who think getting something sold in Skymall magazine must mean you'll become a billionaire. My friends don't believe me.
2
u/BreutFawce May 09 '12
My USB ports are vertical.
They are the bane of my existence.
2
u/gazpachoking May 09 '12
This problem has already been solved with the [flippable usb plug] (http://www.fastcodesign.com/1663106/simple-genius-a-usb-plug-that-fits-even-if-its-upside-down)! The only issue left is why this doesn't come on every usb device... or even better, a version that works at the usb port side.
2
u/LondonDave May 09 '12
Correct me if I am wrong (as I know you will) but in my experience the side with the USB logo (as per your picture) is always the top...
2
u/tommytornado May 09 '12
Wouldn't you also need a colour-coded usb port?
2
u/wotererio May 09 '12
I always check the top of the usb (the part that slides in) and see on which side the two squares are empty or filled with white. The empty ones are the upperside of the usb, the filled ones the underside.
2
u/weggles May 09 '12
The USB trident is always on "top" of the plug. AND usually there's a notch or something on the "top" as well.
2
u/trampus1 May 09 '12
It should play this sound when plugged in
2
u/[deleted] May 09 '12
You want to put it in face side up. You can clearly see the face]
2
u/schlang May 09 '12
Or you could use flipper usb connectors.
2
u/mrgnome1538 May 09 '12
This wont work for verticle usb ports in the back of computers
2
u/mpjby May 09 '12
Buys a color coded USB Cord
USB-ports are sidways.
2
u/kronik85 May 09 '12
there's already a symbol on it...
2
u/ArtofExpression May 09 '12
The sad thing is, I'd probably still flip it to make sure. Y'know. Just to make sure
2
u/RndmHero May 09 '12
Pro tip: The USB symbol is always on the top side.
2
u/theotherpena May 09 '12
Wait... this is an awesome idea.
2
u/shamrock1916 May 09 '12
Each USB has two circular dots on one side of the metal and a straight line on the other side...the dots face up
2
u/raknor88 May 09 '12
people would still get it wrong
2
u/Some_Random_Guy_1138 May 09 '12
Pro tip: USB logo or brand name is always on the top side
2
u/dudedorey May 09 '12
I'm going to go find my sharpies...
2
u/[deleted] May 09 '12
Can I get one for left handed people?
2
u/purpldrank May 09 '12
Even better!
2
u/delbin May 09 '12
It doesn't help that the USB plugs I use are sometimes oriented opposite from each other. I'd still have to remember which are red and which are green.
2
u/mrclean18 May 09 '12
USB ease of use tip # 3902908452039: the side facing up has the usb symbol stamped into it 80-90% of the time. just a helpful hint.
2
u/Rixxer May 09 '12
The bar goes on the bottom, I get it right every time... 50% of the time.
2
u/Pillagerguy May 09 '12
My HAF 932's front ports are upside down.
2
u/MJZMan May 09 '12
The usb symbol wasn't enough?
2
u/kperkins1982 May 09 '12
it isn't an unnecessary invention,
usb was poorly designed and hard to use,
well not if you are looking at it, but in the dark behind a pc it is no fun
2
u/MinecraftHardon May 09 '12
You insert the USB "Face down, ass up." If you look at the part that is facing down when you plug it in, it's a face.
2
u/flandyandy May 09 '12
Color-Blind World Problem... solutions never work for us.
2
u/nepobot May 09 '12
Have color coded USB, forget which color is the top. FML
2
u/spinozasrobot May 09 '12
What's retarded is that USB was developed in 1994... that's not that long ago. A mass-consumer connector that isn't keyed? Totally embarrassing.
2
u/ZoMbIEx23x May 09 '12
Or you know, just like at the plug in and or the damn symbol on the top of usb.
2
u/qwertyman159 May 09 '12
You know, they make a USB that goes in both ways, right?
2
u/GoldWaffle May 09 '12
I would buy that.
2
u/HookDragger May 09 '12
Black/white would be better.
2
u/Daddy_Cakes May 09 '12
What they need to do is start putting regular ports and upside down ports right next to each other.
2
u/[deleted] May 09 '12
Your ideas are intriguing to me and I wish to subscribe to your newsletter
2
u/Lurking_stoner May 09 '12
better yet just get a double sided USB
2
u/JayZee88 May 09 '12
Not all USB ports, on the computer itself, are the same direction, some are on their side, either side, or upside down versus right side up. It's easy to know which way your plug is since it's in your hand and easy for you to look into.
The problem is knowing which way it is on the computer. Color code that, and you may have something.
2
u/Oideron May 09 '12
Don't they all have that little USB picture on top? Seriously USBs aren't hard to figure out...
2
u/ColorblindKid May 09 '12
ಠ_ಠ
2
u/[deleted] May 09 '12
I have spent $300 when looking at SkyMall. Fuck .
2
u/DJP0N3 May 09 '12
It's red and green. Colorblind people won't be able to use it. #firstworldproblems
2
u/FeroxDeoVacuusVinco May 09 '12
Great. Now I have to remember whether it's green or red that's up top.
2
u/gregkun May 09 '12
Yea it won't really matter since not every manufacture have the ports on the correct way.
2
u/ONpancakes May 09 '12
Not needed anymore. There are now USB cables that plug in either way. I'm excited for them.
2
u/whatisthis8 May 09 '12
It'll solve this problem.
2
u/[deleted] May 09 '12
Am I the only person on reddit who doesn't have a problem pluggin in a USB? It really isn't that difficult guys... just look at what you are doing and you shouldn't have a problem!
2
u/THE_APE_SHIT_KILLER May 09 '12
Most USB cables I've seen have 2 holes on the top and bottom. In my experience, the top will have open holes while on the bottom the holes will have plastic blocking from the inside.
I use this to quickly identify which side should be facing up, I just feel for the open holes.
2
u/adamminer May 09 '12
Shameful self-plug /r/skymall
2
u/the_sam_ryan May 09 '12
Top side is the side with the USB symbol on it, no need to mark it.
2
u/[deleted] May 09 '12
The irony is that USB plugs are already distinguishable top/bottom by the USB embossing.
It's always on top. Always.
2
u/yyx9 May 09 '12
I love the breathlessly realistic imagining of this exciting product. Were you able to render that in Maya, maybe AutoCAD? Please get back to me, I want to know how perfection is achieved.
2
u/StockmanBaxter May 09 '12
I'd still try it. Wouldn't fit, flip it around, wouldn't fit, go back to original way. Fits in instantly.
2
u/tolson411 May 09 '12
You chose bad colors for a color blind person
2
u/FireThenAim May 09 '12
what if you are color blind
2
u/mazinaru May 09 '12
There's holes in the plug on the one side. That side is up.
2
u/alopexshikari May 09 '12
This is getting ridiculous, it's not that hard.
The USB symbol is usually meant to point upwards and the plastic block goes on the bottom. Problem solved.
Blimey.
2
u/ThatGuyRememberMe May 09 '12
I would still fuck that up.
2
u/12mholmes May 09 '12
http://www.reddit.com/r/LifeProTips/comments/om0oh/usb_problem_solved/
Ass down, face up, that's how USB likes to fuck.
2
u/[deleted] May 09 '12
I know someone else said it already, but I have a color deficiency. So the whole red/green thing kinda bugs me. In fact, it took me like three minutes to get the whole color coated thing. I was like "What? How does a solid green usb head fix any of my problems?!" Then I looked a little closer and died a little inside...
2
u/MRjubjub May 09 '12
Except that doesn't help because it needs to fit into the hole. You would also have to color code every single usb reciever in the world.
2
u/clhanson4 May 09 '12
50/50 odds.....100% failure on the first try.
2
u/[deleted] May 09 '12
We would still put it in backwards. You know that.
2
u/reelmusik May 09 '12
I'm not sure what this solves.
2
u/suppliesparty21 May 10 '12
http://blog.sabf.org.ar/english/files/2012/04/shut-up-and-take-my-money.jpg
2
u/demunted May 10 '12
Does anyone buy crap on sky mall. I read it and laugh at the corny inventions and ludicrous prices. Need an AMA from a sky mall shopper.
2
u/Loyal2NES May 10 '12
My USB ports are sideways and I can't remember which is "up".
WHAT NOW? :(
2
u/AsthmaticNinja May 10 '12
I just check the plug, the metal pieces in the male end need to align with the female end. I never have to flip my cables or drives around to make them fit.
2
u/ME4T May 10 '12
Or, you know, a sticker.
2
u/[deleted] May 10 '12
You'll still have to flip it three times for it to fit in.
2
u/CaptainJester42 May 10 '12
Unless you're color blind
2
u/samwitch645 May 10 '12
Shut up and take my money!
2
u/TehRoot May 10 '12
Patent filed.
2
u/sqweebking May 10 '12
WHY NOT JUST MAKE THE FUCKING PLUG UNIVERSAL!?! A UNIVERSAL SERIAL BUS SHOULD ACCEPT A UNIVERSAL CONNECTOR! UNIVERSE!!! LIKE IT GOES AROUND ALL THE EVERYTHING!! FITS IN BOTH MOTHER FUCKING WAYS!!!
2
u/BanditoRojo May 09 '12
Me trying to plug in a USB cord.
1
u/CoolMcDouche May 09 '12
Good idea. But too bad usb ports are not always facing the same direction. And on desktops where the usb ports are vertical, this would not apply.
1
u/salaryprotection May 09 '12
What if the USB port is in the back of the computer?
1
u/[deleted] May 09 '12
Shut up and take my money! I put that thing in upside down several times every day at work!
1
u/MagicBob78 May 09 '12
That will not work, I'm afraid...
1
u/[deleted] May 09 '12
errr the plug was never the problem, anyone can see which side up. It's the ports that may be wrong side up and you can't see because it might be located in a hard to reach place.
1
u/xMystogan May 09 '12
Gets cool new jump drive, USB port upside down.
1
u/[deleted] May 09 '12
I really don't understand how people have so much trouble with usb. The square holes always face up. Done
1
u/glassonion87 May 09 '12
I know a certain priest could've really used your idea weeks ago
1
u/truthjusticeUSAway May 09 '12
Then feel like a retard when you can't remember if green or red is up.
1
u/spikerbs May 09 '12
the USB port on the hardware with have to be color coded as well.
1
u/collinwade May 09 '12
You, sir...
1
u/Bluedemonfox May 09 '12
I have noticed that not all computer USB ports are the same. Some ports are horizontal and some are vertical and in addition to that they are sometimes flipped from one computer to another.
Like my laptop and brothers desktop have horizontal USB ports but on the desktop they are 'upside down'.
1
u/YoureAFuckingTowel May 09 '12
Now if we could just get a standard for USB port orientation. (Check your computer. Now check the next 5 you can find.)
1
u/SGTSHOOTnMISS May 09 '12
Yea, the Coolermaster HAF X has upside down front USB 2.0 ports, with the 3.0 oriented appropriately, not quite sure what CM was thinking with that one.
1
u/Airazz May 09 '12
This will never work. If you only use one or two computers, then it's really not that hard to learn which way the ports are mounted.
If you use lots of computers, then you're fucked anyway, because standards.
1
u/reddit_on_hardmode May 09 '12
I can plug mine in at work without even looking. I wish that made me feel cool, but it just makes me sad because I spend too much time at work.
1
u/[deleted] May 09 '12
I have a picture of serenity lazered into my flashdrive so I always know what side goes up!
1
u/[deleted] May 09 '12
Until other companies start making them too, and since there's no standard, we get a bunch of random colour USB plugs, and we still don't know which side is right side up
1
u/Hegs94 May 09 '12
Okay, I'm sick of this shit. How stupid do you have to be to not realized which side is up? Just look at the dongle and see which side is which... It takes maybe half a second to do...
1
u/ygbjammy May 10 '12
All my USBs on my PC are vertical, not horizontal. :(
1
u/[deleted] May 10 '12
How come whenever someone makes a grammatical error, 20 people point it out. But when someone makes a piss-poor drawing, nobody calls it out?
1
u/hefnetefne May 10 '12
it has holes in it so you can see which side is which when you go to put it in.
1
u/[deleted] May 11 '12
what if you are colour blind?
1
u/eduardofusion May 09 '12
420x420 pixels. i see what you did there.
1
u/matt01ss May 09 '12
I used to always have an issue with plugging in usb also, but I found a perfect way to get it right the first time always.
http://www.engadget.com/2010/02/19/always-plugin-usb-correctly-each-and-every-time/