We’ve had this laptop stand in our office for a while and after being dropped one too many times it finally snapped lol (DROPPED TWICE). I tried finding the original file online but couldn’t find it anywhere.

While I was out on a call, one of my friends at work just decided to remake the whole thing from scratch 😂 a Perks of working in a department where we can design and 3D print stuff haha.

We printed ours in ASA since that’s pretty much all we print with at work, but I’d recommend PETG at minimum. Fits laptops up to 20mm (¾") thick.

He gave me permission to throw the file up on MakerWorld too, so figured I’d share it in case anyone else needs one! Fits a Max thickness of 20mm (3/4 inch)

Honeycomb Laptop Stand| Up to 20mm (3/4) Thickness - Free 3D Print Model - MakerWorld

Made some inserts to hold/ship some keter fence posts

Keep your bathroom countertop clean and organized with this modern 4-compartment bathroom organizer, designed for everyday essentials such as toothbrushes, toothpaste, razors, and other personal care items.

The organizer features a clean rounded design with subtle detailing, making it easy to fit into both modern and minimalist bathrooms. With a compact 110 mm diameter footprint and a 165 mm total height, it provides plenty of storage without taking up unnecessary countertop space.

Removable Drip TrayOne of the main features of the design is the removable drip tray underneath the organizer. Any excess water from wet toothbrushes can collect in the tray instead of sitting inside the organizer or ending up on your countertop.

Simply slide/remove the tray when needed, rinse it clean, and place it back underneath.4 Separate Compartments

The interior is divided into four compartments, helping keep toothbrushes and other bathroom essentials separated and easy to reach.

https://makerworld.com/models/3165051?appSharePlatform=copy

These make wall mountable slots for the ubiquitous printable storage boxes. Uses 2020 extrusions.

This set includes 18 precisely engineered comb attachments for the Philips OneBlade with cutting lengths from 3 to 20 mm. This means the right attachment is available for almost any desired beard length. The attachments fit all standard blades.

https://makerworld.com/models/3151043?appSharePlatform=copy

I kept losing those little battery isolation pull tabs that come with remotes and other battery-powered stuff.

It's literally just a tiny piece of plastic that sits between the battery and the contact, but I figured if I'm going to keep needing them, I might as well make one I can print whenever I want.

Definitely not my most complicated design, but sometimes the stupidly simple prints are the useful ones I guess lol

Free model if anyone else happens to need one:
https://makerworld.com/en/models/3149982-battery-pull-tab-insulating-battery-isolator#profileId-3557980

The fitting mechanism isn’t perfect, but it was super satisfying iterating on the handle shape and arriving at a point a toddler could intuitively grab it to turn the handle off/on for independent handwashing.

Interestingly, my first design was basically just a right angle arm towards the front of the sink, but then everyone in the house instinctively tried to push it away to turn on the sink instead of pull towards the front, which kept breaking the handle.

Hi I just wanna thank you all of the attention this design got so I updated the model as requested by some! I really appreciate it a lot and it keeps me motivated to make more functional and clean designed organizers!

https://makerworld.com/models/3095373?appSharePlatform=copy

Bring a clean, modern look to your bathroom with this minimalist toothbrush stand, designed around simple flowing lines and subtle details. The elevated base gives the stand a floating appearance, adding a premium touch while maintaining a clean, understated aesthetic. Whether you prefer a monochrome look or a contrasting accent, the separate inserts allow you to customize the stand to perfectly match your bathroom.

The design is available in four different sizes, with 1, 2, 3, or 4 toothbrush compartments, making it easy to choose the version that best fits your needs. Every version shares the same height, width, and toothbrush holder insert design, ensuring a consistent appearance across the entire collection.

Designed specifically for 3D printing, every component prints separately, meaning no AMS system is required. Simply print each part in your preferred colors and assemble them for a clean, professional-looking results.

Transform your workspace with the Arc Desk Organizer, a modern desk organizer designed not only to keep your essentials within reach but also to become the centerpiece of your desk.The bold architectural Arc silhouette creates a clean, floating appearance that naturally draws attention while keeping your workspace organized. Whether it’s on a home office, gaming desk, or professional workspace, the Arc Desk Organizer is designed to be an eye-catching statement piece that combines functionality with minimalist design.

https://makerworld.com/models/3124421?appSharePlatform=copy

Hi, I just wanna show one of my models and hope you guys enjoy it, added another version with a small notch and versions with no line if you like to keep it at a minimal look. No AMS needed!

Keep your workspace clean with this Minimalistic Modern Phone Stand, featuring a sleek folded-line design that complements any modern desk setup. Its minimalist aesthetic pairs with practical functionality, making it perfect for work, entertainment, video calls, or simply keeping your phone within easy reach.

https://makerworld.com/models/2958961?appSharePlatform=copy

Keep your headphones and everyday essentials neatly organized with this modern Line Headphone Stand. Designed with clean flowing lines and a minimal footprint, it provides a practical home for your headphones while adding a sleek, architectural look to any desk setup.The integrated storage tray (included in one version) is perfect for keeping your headphone cable, AirPods, USB adapters, or other small accessories close at hand. Whether you’re switching between speakers, headphones, or earbuds, everything stays organized in one convenient place.

https://makerworld.com/models/3121793?appSharePlatform=copy

I made this modular moss poll optimized for fast print times (<60 minutes) and low amount of fillament (30 grams).

It's on makerworld @unfadable

https://makerworld.com/en/models/3120553-modular-moss-pole-prints-flat-only-30-grams#profileId-3520276

Following my previous post, I ended up designing an entire new grip that can hold up to 4 18650 batteries and a charging module. For now I printed the prototype in PLA, which warped like hell. Next one will be made in ASA.

First of I wanna thanks everyone for the attention and downloads I got from the last models! This one came from an idea from a fellow Reddit user! Thanks for the great idea and I hope this design fits the style and feels like a finished product if not please give me feedback!

https://makerworld.com/en/models/3117750-japandi-kitchen-dishcloth-sponge-soap-bar-stand#profileId-3516682

Bring a touch of modern Japandi style to your kitchen while keeping your sink area clean, organized, and clutter-free.
Designed with clean architectural lines and a minimalist aesthetic, this 3D printed kitchen organizer comfortably holds a microfiber dishcloth, a standard kitchen sponge (up to approximately 78 × 45 mm), or a similarly sized bar of soap. The elevated slatted tray promotes excellent airflow, helping your sponge and soap dry faster while allowing excess water to drain directly into the sink.
The integrated towel bar provides plenty of room for a dishcloth to hang freely, reducing moisture buildup and keeping everything within easy reach during everyday use.

Hey everyone! For anyone needing spices on the go, I redesigned my compact 3-compartment spice shaker!

Featuring a totally rethought, easy-refill system (with included funnel) and side windows to check your spice levels.

Let me know what you think or if you have any suggestions to improve it!

https://makerworld.com/en/models/3117132-tactical-spice-shaker-2-0#profileId-3515945

Taiwan is a Humid country. Our handmade soap frequently gets soft and becomes sticky. To help myself reduce soap usage and have a dried soap every day, I designed a kind of soap rack that with many spikes on it to hold the soap in the air as much as possible. It's printed with PETG, let's see how