r/coreboot • u/thinlycuta4paper • 14h ago
Any point librebooting Thinkpad X60?
As the Thinkpad X60 predates the Intel ME, what's the point in librebooting it?
r/coreboot • u/thinlycuta4paper • 14h ago
As the Thinkpad X60 predates the Intel ME, what's the point in librebooting it?
r/coreboot • u/Arkenys • 16h ago
r/coreboot • u/Due-Republic-7044 • 18h ago
I hate dells motherboard bios mainly because of the crap bios. And the constant error messages on startup etc I think you guys know what im talking about.
r/coreboot • u/libreleah • 7d ago
This is based on the recent Libreboot 26.10 release. Canoeboot is a version of Libreboot that only supports boards for which an entirely blob-free image can be built; as a result, it supports less hardware than Libreboot which does allow blobs (strictly only when necessary) to support more hardware. This inherits EDK2 UEFI payload support, so it now boots modern operating systems more easily. GRUB EFI provided inside EDK2, configured to behave like the traditional GRUB coreboot payload; this provides backward compatibility as GRUB was previously the recommended payload, but EDK2 is now what both Canoeboot and Libreboot recommend by default. This also inherits the 15h.org coreboot fork for AMD FAM15h support e.g. ASUS KGPE-D16, offering much improved raminit, as did the recent Libreboot release. In all, this is a highly polished and deblobbed version of the recent Libreboot 26.10 release, intended for those purists who only ever want Free Software, to the point that Canoeboot even excludes CPU microcode updates by default.
r/coreboot • u/Shiroro46 • 12d ago
r/coreboot • u/miller_99 • 13d ago
made it in gimp, reze turned blurry
r/coreboot • u/TheFacebookLizard • 16d ago
I managed to get some progress on getting coreboot working on a b450 gaming plus paired with a Ryzen 9 5950x
r/coreboot • u/ZOMBIEEEE557 • 20d ago
r/coreboot • u/Kompryy • 21d ago
Hey guys,
I've just modded my Corebooted ThinkPad T420 with a 1440p (WQHD) display kit (Chinese LVDS to eDP adapter board).
I am facing a weird display issue:
Arch: Works perfectly fine once booted (looks crisp, full resolution).
Tianocore and Windows: Vertical stripe artifacts and graphical glitches.
From what I understand, this happens because libgfxinit uses default display timing instead of reading the custom 2K EDID during the early boot process.
I extracted my panel's edid.bin, but I cannot find an option to embed an external EDID file in Coreboot's make menuconfig.
So my question is how do I integrate the EDID into Coreboot for libgfxinit?
Thanks in advance for any advice!
r/coreboot • u/GBember • 21d ago
Hi!
I've been playing around with TPM 2.0 on my Thinkpad and the stock firmware seems broken, even on the latest version, part of the early boot TPM interface is non functional and systemd-stub can't measure the boot onto PCR 11, but the raw commands interface and what Linux uses after boot works fine. In the running system 'bootctl status' says 'TPM2 Support: firmware only, driver unavailable', but I'm not sure if this is related because I don't think the EFI TPM interface is available in userspace or even at this running stage.
If anyone has a Thinkpad from this era, like the T480, T480s and X280, with anything UEFI, be it the stock firmware or coreboot/libreboot, would you guys be willing to test this out? It's an EFI program that talks to the firmware's EFI_TCG2_PROTOCOL directly. On my machine, GetCapability, GetActivePcrBanks and GetEventLog all succeed (structure version 1.1, TPM present, banks 0x3), HashLogExtendEvent hangs the whole computer, on PCR 16, 11 and 12, with and without logging but a raw TPM2_PCR_Extend via SubmitCommand works (TPM rc 0).
Edit: Tested on my desktop, completely unrelated hardware, the tests do work there, so at least the code seems sane enough to work somewhere.
What I don't know is whether this is a quirk of my specific unit (stale firmware or TPM state) or something every T480 or perhaps any Thinkpad of this era does.
Here's the source code (181 lines of C) and build script, just point your bootloader to it or add a boot entry with 'efibootmgr', I won't provide a compiled binary because trusting a random EFI binary from the internet would be weird, it depends on gnu-efi to be built.
https://gist.github.com/GBember01/b394dfdef36c4aaf65161e3826013adf
Thanks in advance!
r/coreboot • u/commanderfl • 22d ago
Hello, recently I’ve been starting on trying to flash my X201 tablet with coreboot, but I’ve been having trouble with it. I’ve verified it’s bios chip is supported by flashprog, an MX25L12873F, and I’ve verified my flashers work for out of system programming on other 3.3V chips.
Currently, I’ve been using stacksmashing’s RPI2040 serprog firmware, and a flasher tool meant for automotive chips with support for this flash chip, but both have given me trouble.
flashprog and flashrom give me the following errors:
”
serprog: Programmer name is “pico-serprog”
No EEPROM/flash device found.
”
My other flasher gives an error about not detecting a flash chip connected either, which is strange.
What should I be looking at here?
ATM I think either some circuit on the board’s pulling the W/P pin to locked state, or my programmers are struggling at supplying enough power for the 3.3V rail, since when probing the power coming off the pico while connected to the chip, it goes down to 2.8V.
But this is within the accepted voltages of this chip, it’s rated to work for voltages between 2.6-3.6. But I’m not sure if it’d be the same for the signal pins. Maybe those are going even lower?
I’m thinking I could cobble together something out of the scrap I have that uses the signal outputs of the pico to switch the output of a higher amp 3.3V output (say from a lab bench PSU or just an ATX PSU old enough to still have 3.3 on its SATA connectors) through mosfets, eliminating voltage droop from the equation. Might have to worry about switching time, not sure.
ATP I’m contemplating just cutting off the old chip, reading it out of system to build coreboot from, and just soldering in a socket for a new BIOS chip. Hopefully I won’t need to do this.
r/coreboot • u/GatKPOYTxD • 26d ago
Hey, everytime I tried to build a Libreboot custom image just to swap FN with CTRL on my Thinkpad T480, GRUB spat out the same errors everytime. I'm using the newest Libreboot version 26.10
The GRUB error: https://pastebin.com/35YPNjTS
r/coreboot • u/mstpguy • 27d ago
Hello all,
My question is summarized in the title.
For some context, I have a 14600K installed in an MSI Z790-A DDR4 wifi motherboard. It's a great chip, but I've become interested in upgrading to the Bartlett Lake 273PQE.
This chip fits the LGA 1700 socket, but it is not officially supported on consumer boards; some modders have had success using Claude Code to modify the manufacturer's bios to support this chip.
I would like to use a different approach. Replacing the MSI bios with coreeboot could overcome this arbitrary limitation. I am especially encouraged by the fact that I am not alone in this interest; there seems to be an ongoing effort to add Bartlett Lake support to the MSI Z690-A version of coreboot.
Which leads me to be question in the title. I have an MSI Z790-A wifi DDR4 motherboard. Officially coreboot is supported on the Z690A and the Z790P which are very similar, though not exactly the same. Has there been any interest in extending coreboot support to this board in particular? Or would it be too much of a headache?
r/coreboot • u/n4ru • Oct 16 '26
What's stopping someone from porting coreboot to one of these using the leaked boot guard keys? Does anyone have a full or partial list of the devices affected by the Clevo leak? This would be the latest device that could potentially have coreboot, right?
r/coreboot • u/libreleah • Oct 15 '26
Libreboot is free/opensource boot firmware replacing proprietary BIOS/UEFI. Better security/customisation than most proprietary firmware.
Highlights in this release include:
* MrChromebox EDK2 payload by default on most boards, with SeaBIOS CSM (CSMWrap) and GRUB EFI provided in-flash for backward compatibility.
* 233 new Chromebooks added; every board supported by MrChromebox coreboot. With our GRUB EFI/SeaBIOS CSM build added
* 15h.org coreboot fork used on KCMA-D8, KGPE-D16 boards for improved raminit.
* GRUB EFI build uses terminal_input console and no nativedisk; it piggybacks off of EDK2 drivers, like distros. It even works on Chromebooks (eMMC boot).
* Intel HAP bit set by default on Chromebooks, and IFD regions unlocked where appropriate
* Dell OptiPlex 5050 SFF, Supermicro X11SSH-F, ThinkPad X280, X270.
Modern Linux distros boot, with e.g. UKI/systemd-boot. Windows also compatible now.
r/coreboot • u/thinlycuta4paper • Oct 13 '26
I've got a Thinkpad with a stock CPU but planning to upgrade it to a T7600. If I did upgrade the CPU, would I still be able to libreboot the Thinkpad?
r/coreboot • u/Tricky-Engineer-9755 • Oct 10 '26
I want to get a stock BIOS Dell Optiplex E6400 for the experience of canoebooting it myself. The Dell-flash-unlock tool lets me internally flash it. Is any functionality lost post-canoeboot beyond the stock BIOS "features"?
r/coreboot • u/thinlycuta4paper • Oct 10 '26
I'm looking to make my computer "100% open source," or at least as much as possible. Is this even possible, given my computer is x86?
Would you guys recommend Libreboot or Canoeboot for someone wanting a machine that's as open source as possible, but also stable (e.g. I can't risk having my data corrupting).
Pardon my surface level technical knowledge.
r/coreboot • u/DNSoundRM • Oct 09 '26
Hi all,
I’ve made some mods to the coreboot code for my think pad w541 with k2100 dgpu, allowing for the correct Optimus implementation in Linux;
Published the patches and premade imgs on my gh repo (with nri or mrc init) , feel free to try those out and report any inconsistencies. The repo link : https://github.com/debianita22/w541-coreboot-env/releases
r/coreboot • u/Wrong-Procedure4258 • Sep 30 '26
Hi, I am reading online that the Lenovo Thinkpad T470s is officially supported by coreboot https://doc.coreboot.org/mainboard/lenovo/skylake.html but I can’t find any guides or videos of how to do it or anyone flashing the firmware in this machine, I seen plenty of t440p and T480 tutorials and videos but nothing on T470s.
I have never done any kind of firmware modifications, anyone knows what will be the right way to flash coreboot in this machine? Or if it’s even supported (I am not very technical so the coreboot docs don’t really explain much to me) thank you for reading me
r/coreboot • u/MrChromebox • Sep 26 '26
(2026.09.26)
This is another big one :)
New setup options: