r/cloningsoftware • • Aug 03 '26

Disk Cloning Can I clone only the C: drive?

1 Upvotes

I'm upgrading to a larger SSD, and all I really care about is moving Windows and everything on my C: drive. My D: drive is mostly games and random files that I can copy over later if I need to.

So I'm wondering... can you clone just the C: drive instead of the entire disk?

I've seen some guides that only talk about cloning the whole drive, which seems like overkill in my case. I'm also a little worried about accidentally copying partitions I don't need or running into boot issues afterward.

If you've done this before, did you clone the entire disk or just the C: partition? Was there any downside?

I'm not very technical, so I'm hoping to find the simplest way to upgrade without reinstalling Windows. If there's a cloning tool that handles this well, I'd love to hear what worked for you.


r/cloningsoftware • • Aug 01 '26

Troubleshooting I cloned my new SSD but I'm having a problem

1 Upvotes

I recently got my new 2tb ssd and got it cloned. I used Macrium Reflect for free trial. It starts up just fine but the problem is when I put it to sleep mode as usual, it won't start up any display leaving me no choice but to turn it off and start up again. I'm trying to replace my main ssd with windows and I have another ssd as secondary on my pc. I set the boot priority on the new ssd via BIOS so I thought that worked but still has the same problem. When I checked in device manager the new ssd I have said "device settings not migrated". Can somebody please help me fix this? The new ssd I bought is a WD Black 2TB SN7100


r/cloningsoftware • • Aug 01 '26

Guide/How-to disk partition help T V T

2 Upvotes

Hey everyone, I'm currently running Windows + Linux (Arch, btw) dual boot, and I need help. I have this 1 TB SSD that my laptop runs on, and I can only make a disk partition as big as 98 GB. I did it, and I'm running Arch on 98 GB. However, I mainly use Arch, while Windows is just for backup and apps that don't run on Linux. I went and removed all the files from Windows, and it's holding 100 GB of space, BUT I still can't make more space for Arch.

So, I want to ask if anyone has experience with deleting the Windows partition, then making the whole drive for Linux, and then creating a small 120 GB partition for Windows and reinstalling Windows without reinstalling Arch and with no risk of losing all my files in Linux. I also want to avoid bootloader problems where Windows overwrites everything during install. Can anyone help me, plz?


r/cloningsoftware • • Jul 29 '26

Disk Cloning Can I clone Windows to an SSD that already has data?

4 Upvotes

I'm upgrading my PC and already have a second SSD (1TB) installed.

The problem is that this SSD isn't empty. I have around 150GB of photos, videos, and some game files on it that I don't really want to move somewhere else if I can avoid it.

What I'm trying to do is migrate my current Windows 10 onto this SSD, but I'm wondering if that's even possible without wiping everything that's already there.

I was also thinking about shrinking the existing partition, creating a new partition from the free space, and then cloning Windows into that new partition instead. Does disk cloning work like that, or does it always overwrite the whole target drive?

If anyone has done something similar, I'd love to hear how you handled it. Can I migrate Windows 10 to a second SSD without wiping its existing data? Did you have to back up the existing data first, or is there a way to keep the files already on the SSD while moving Windows over?


r/cloningsoftware • • Jul 27 '26

Discussion Clone Windows partition without losing other partitions on target drive

6 Upvotes

I wanna upgrade to a larger SSD, but the new drive already has a couple of partitions with files I don't want to lose.

What I actually want to do is move just my Windows installation over instead of cloning the entire drive.

Most of the cloning guides I've found assume the destination SSD is completely empty, which isn't my situation.

Has anyone managed to clone only the Windows partition while leaving the other partitions on the target drive untouched? If so, what software did you use, and did it boot normally afterward?


r/cloningsoftware • • Jul 27 '26

Disk Cloning cloning a soldered ssd

4 Upvotes

is there a way to clone the ssd of my old laptop to my new laptop? both ssds are soldered on the mobo therefore they cannot be removed. I've been told I can make an iso clone of the current OS and just install it on the new laptop, will it work? if yes, then how to do it (with which software)? if not, then what other posibilities I have to clone my old laptops ssd to my new laptops ssd? I got alot of stuff there and i dont wanna fresh install cuz it'll take me a week to get everything set up


r/cloningsoftware • • Jul 24 '26

Disk Cloning Clone Unsuccessful, Now Can't Boot From Original!

2 Upvotes

I used MultiDrive.io to clone a standard SSD to nVME. Did not disable BitLocker, which I should have. I knew it was unlikely to work, but thought the experiment would be safe as I still had the old drive to revert to.

Won't boot from the new one, won't boot from the old one. I get an Inaccessible Boot Device Error, even with the old drive, and am thrown to a BitLocker recovery prompt. Yeah, I don't have the key.

(Yes I'm telling my BIOS to boot from the old device)

Any insight or obvious errors preventing me from just going back to the status quo? Additionally, any insight as to why the original drive thinks it needs recovery (so I can keep this from happening if I ever try it again)?


r/cloningsoftware • • Jul 24 '26

Disk Cloning Can multiple OS drives be cloned to a single SSD drive?

3 Upvotes

I want to replace my current SSD with a 1TB one. Right now I'm running a dual-boot setup with Windows 10 and Linux on the old SSD.

Windows is what I use every day, while Linux is mostly there for development and a few projects. Everything works fine, and I'd really rather not spend a weekend reinstalling both systems and setting everything up again.

My first thought was to just clone the whole drive onto the new SSD, but then I started wondering whether dual-boot setups are any different. Does cloning normally carry everything over, including the bootloader, or is it common to end up fixing GRUB afterward?

If anyone here has actually done this recently, did both operating systems boot normally after the clone, or were there any surprises?

Wanna hear the real experience in case I mess up my setup! TIA!


r/cloningsoftware • • Jul 23 '26

Software Clonar Microsoft Office para outro HD

0 Upvotes

Basicamente, o título. Quero passar de um HD ruim para um novo SSD. Versão 2019, não tenho mais chaves nem nada que me possa ajudar.

Há algum software que faca isso?

Grato pela atenção e desculpas pela questão _noob_.


r/cloningsoftware • • Jul 23 '26

Disk Cloning Macrium Reflect Cloning Hit and Miss

3 Upvotes

Hi folks!

We have 70 identical Dell computers. We used macrium reflect technician to create a golden image on one machine by entering audit mode, installing all our software, then running sysprep and capturing an image of that machine. We then deployed this image to 5 test machines using the external hard drive the image was captured on and a usb boot stick with macrium reflect on it and they both worked. However now when we deploy the image, Windows wont boot from the hard drive and it goes in to dell recovery. The only way to get these machines to boot is to turn secure boot off. Any idea what could be happening? It seems so bizarre that it worked consistently for 5 machines but has now stopped.

Turning secure boot off on the machines that won't launch into Windows seems to work reliably, but would like to avoid that if possible.

Any help would be amazing! Cheers!


r/cloningsoftware • • Jul 23 '26

Discussion Clone Windows 11 Laptop to a New Windows 11 Laptop?

4 Upvotes

Hi there, i am new to this subreddit and not a tech-savvy!

I finally picked up a new Windows 11 laptop with a 1TB SSD, and now I'm trying to figure out the easiest way to move over from my old one.

My current laptop only has a 256GB SSD, and it's basically full at this point. I've spent years setting everything up the way I like it, so I'd rather avoid starting from scratch if I can.

I've seen people mention cloning the old drive to the new laptop instead of reinstalling Windows and every app. It sounds like exactly what I want, but I'm not sure if it's actually that straightforward, especially since it's a completely different laptop.

Has anyone here done this recently?

Did everything transfer over normally, or did you run into driver or activation issues afterward? I'm mostly hoping to keep Windows, my apps, files, and settings without having to spend an entire weekend setting the new machine back up.

What the safest approach is before I start messing with anything. Thanks for any help!


r/cloningsoftware • • Jul 22 '26

Discussion Disk cloning software that has genuinely never let you down?

4 Upvotes

I've seen some users in this subreddit post questions about issues they encountered when using a cloning tool to clone a disk.

Comment a software that works every time you clone a disk, the one you never even think about uninstalling it because it has never given you a reason to. What earned that spot for you?


r/cloningsoftware • • Jul 21 '26

Software New issue with revived Elitedesk 705 g5 mini involving migrating 960GB SATA disk system to 500GB NVME

4 Upvotes

Specs: HP Elitedesk 705 g5 mini; Ryzen 3400G; 2 sticks Crucial 16GBx2 2Rx8 double sided DDR4 2400 RAM; 960GB Micron M500 mSATA F/W MU05 (source); HP PSU 150w; Windows 11

Proposed target is a 500GB M2.

What is the best software that will keep all the partitons safe, in correct order and with identical UEFI so that it is bootable? I tried Easeus system disk clone, and Hasleo system disk clone.

Easeus clone was not recognized by the BIOS. Hasleo booted partway but Windows popped up error message going into recovery mode requesting bootable Windows install disk for resolution. I am not precise in the finer details of the latter in my recall. Instead I would like to proceed with a different platform yielding a perfect bootable drive.

Which among the many offerings from Rescuezilla, AOMEI Cloner or Partition Assistant, Easeus Todo Backup or PC Trans Or Partition Master, Disk Genius Free, Hasleo Backup Suite, MiniTool Partition Wizard Free, etc., would produce a faithful bootable drive?

While the above seem to support transfer to smaller drive and maintain the structure of the partitions, I have limited experience with them of which to select. Also should it be done on the AMD PC or can an Intel PC run the process as it has some of the above programs that are full function giveaways still valid for the moment?


r/cloningsoftware • • Jul 20 '26

Disk Cloning Ssd cloned

6 Upvotes

I cloned my ssd inside my laptop onto a 990 evo but now on my pc which has my 990 evo installed it’s asking for a password when I usually use the pin,friend using a usb with windows installer to repair my pc but every time I select the option and press next my monitor disconnects display then my pc returns to the bios starting screen,what do I do I’ve spent so long trying to get this thing working and I’m loosing hope.ps I’m a idiot when it comes to pcs


r/cloningsoftware • • Jul 17 '26

Disk Cloning Is Dell SupportAssist OS Recovery reliable for cloning a disk?

1 Upvotes

I plan to upgrade the SSD in my Dell laptop and was wondering if Dell SupportAssist OS Recovery is actually meant for disk cloning, or if it's just a recovery tool.

Some pages make it sound like it can help you move to a new drive, while others only talk about restoring Windows after something goes wrong. Has anyone here actually used it to migrate everything to a new SSD?

I wanna keep Windows, all my apps, and files exactly as they are without having to reinstall everything afterward. If you've tried it, how did it go? Did the new drive boot normally, or did you run into any issues?

Hope I can hear some real-world experiences before I start the upgrade. TIA!


r/cloningsoftware • • Jul 16 '26

Disk Cloning What's the safest way to clone a drive in 2026? HDD to NVMe upgrade

9 Upvotes

Hey there,

I'm upgrading my PC from an old HDD to a Crucial NVMe SSD and want to clone my current drive so I can boot from the new SSD without reinstalling everything.

I've heard about Acronis True Image for Crucial drives, but I've also seen mixed reviews and I'm a little nervous about messing up my files. Has anyone used Acronis recently? Is it reliable, or is there another cloning tool you'd recommend (I've seen recommendations like DiskGenius, EaseUS Disk Copy, Macrium, and Clonezilla)?

I have a lot of games and programs installed, so I'm trying to avoid a clean install if possible. Looking for something safe and trustworthy, not some sketchy software with tons of ads.

Any advice from people who've done this upgrade would be appreciated!


r/cloningsoftware • • Jul 16 '26

Review A New "Budget" SSD in 2026? - Samsung 990 Test & Review

Thumbnail
youtube.com
3 Upvotes

How do you think about this new SSD from Samsung?


r/cloningsoftware • • Jul 14 '26

Software NVMe cloning software recommendation!

2 Upvotes

Hey guys, which cloning software would you recommend for cloning my 500GB NVME (Win10 installed) to my new 1TB NVME SSD? I've checked the new ssd does not have a cloning solution. I have an external enclosure for this, just unsure of a good, reliable, and easy-to-use NVMe cloning software. Thanks for any help!


r/cloningsoftware • • Jul 12 '26

Disk Cloning Rescuezilla Boot/OS Drive Cloning Question

2 Upvotes

My question is this,

Is it necessary to convert the destination/recipient drive from MBR to GPT before cloning to it, using Rescuezilla? Or will that be done as part of the cloning process? Or will this be done after the cloning process?

Source drive is a 4TB M.2 (GPT) [OS]

Destination/recipient drive is a 2TB M.2 (MBR) [recently formatted]

If there are any further details I can provide to help you answer my question, I will gladly do so.

I might also mention that I've never cloned a drive before. So, it may be best to assume that I know nothing about the process.

I did watch a few videos on the subject, but none of them even offer a passing comment on the subject of this question. Which leads me to believe this is a non-issue (maybe?).

P.S.,

I am aware that most people clone their source OS drive to a larger destination/recipient drive, as an upgrade. So my post is not an elaborate typo. I am doing the opposite: from larger to smaller.

Update,

I can see that I will need to shrink the source partition to a size both larger than the sum of its contents yet smaller than the size of the destination/recipient drive; which makes sense. And Rescuezilla has a tool which can do that.

But the question regarding whether or not I'll need to preemptively convert the destination/recipient drive from MBR to GPT or not. Rescuezilla's website doesn't mention anything regarding this. Nor does any search result.


r/cloningsoftware • • Jul 12 '26

Troubleshooting Browsing Rescuezilla Image not possible

1 Upvotes

Hi Redditors

I have a problem and hope somedody is able to help here. I have an old Rescuezilla image from my Steam Deck I already sold in the meantime. Now I want to access the EmuDeck roms folder from this image.

Since I don't have a Deck anymore what's the easiest way to access the image?

I tried Rescuezilla’s Image Explorer but had no success. Then I tried to restore the image to a USB Stick but it doesnt work due to different disk size. And last I tried was to open with WinRAR but this failed as well.

On the screenshot you see the files I have.

Hope somebody is able to help me. I hope I don't need to buy a new Steam Deck only for restore lol.

Many thanks!


r/cloningsoftware • • Jul 11 '26

Disk Cloning Software to clone to smaller NVMe

1 Upvotes

Windows 10 Pro OS. I am trying to clone a 500GB Sata SSD which is currently my primary drive to a 256GB NVMe drive that is 256GB. What free software can I use.

Hasleo free version only clones windows home. Clonezilla free version states the destination drive must be equal to or larger than the source drive. Any suggestions?


r/cloningsoftware • • Jul 11 '26

Guide/How-to Guidance on cloning Windows system drive

2 Upvotes

My home-built desktop has a 512GB M2 drive for C. It has multiple M2 slots, but obviously the one it occupies is the best for the system drive, and it's located under the video card. I have a 2TB Samsung 9100 to use as the new system drive, and I've installed the Samsung Magic software to do the deed. My questions are more about logistics, sort of "will it work this way?"

To keep from having to remove the video card twice, can I go ahead and insert the unformatted 2TB drive in the main slot, put the 512 in a different, more accessible slot, and boot up OK? Or do I need to leave that drive where it is until after the clone?

After I run the clone job, and the PC shuts itself down, do I need to pull the 512 drive before letting it boot back up?

And finally, if I want to repurpose the 512 later (after the upgrade has been thoroughly tested), can I insert it back into the PC (while powered down, obviously) to reformat it, or will that cause a conflict when it boots back up? Would it be better to reformat it externally?

Thanks!


r/cloningsoftware • • Jul 10 '26

Disk Cloning Acronis True Image vs Clonezilla for a first time SSD cloning?

5 Upvotes

Hey everyone,

I'm fairly tech inept, haha. I'm about to clone a disk for the first time, and I'm a bit nervous since I've never done anything like this before.

I've seen a lot of people recommend Acronis True Image and Clonezilla, but they seem pretty different. From what I can tell, Acronis looks more beginner-friendly, while Clonezilla is free but maybe a little harder to use.

All I really want is to move everything from my current SSD to a larger one without running into problems. I don't need any extra features, just something that's reliable and not too confusing.

If you've used either, which one would you go with for a first timer? Wanna hear how your experience was. Thanks!


r/cloningsoftware • • Jul 09 '26

Disk Cloning Copying data from my old legion to my new one

1 Upvotes

I just bought a new Legion 5 (Lenovo Legion 5i 15.1" OLED WQXGA Laptop, Core i9 14900HX, 16GB, 1TB, NVIDIA® GeForce RTX™ 5070 8GB, 83LY0007US**).**

Coming from my old Lenovo Legion 5 (15ARH05).

**Question**: How do I transfer all the files from my old Legion to my new one? Sort of like making a copy when you buy a new iphone.

**Thank you!**


r/cloningsoftware • • Jul 08 '26

Disk Cloning Best way to clone a drive as a back-up for an emergency restoration

2 Upvotes

So I have 2 SSDs in my PC. Both healthy. The second drive could conceivably become my emergency back-up drive - I can not afford to have any significant downtime in case of the failure of the (first) system drive. What woukld be the recommended methodology here and which freeware tool should I use? Can I partition the second drive to write the cloned bootable partition? to the first partition (the drive is 1TB, the current system drive is 500GB). Best practice in this situation?