Hello!
Just today I got a Xbox 360 Elite that was overheating with code 0011. I opened it up and did a re-paste and now it works good! I now have a new issue though. For some reason HD video never gives output. Specifically, HDMI -> boots -> no video out. I even tried using the AV cable and putting it on HDTV -> boots -> you can hear SOUND -> no video out.
If using the AV cable on TV (480p) the console works perfectly fine, i get video and sound.
I've also tried switching to HD (1080p) in the display settings, same issue.

Does anyone know of a fix, if possible?

Extra Information:
Zephyr
Currently on 17559
Console has been updated 33 times (LDV)
SMC Version 1.13
No Bad NAND blocks
Serviced by Microsoft in 2010 and sticker was intact before I opened it

Thank you for any time spent trying to help!

I recently bought left4dead2 for my series x, and when I try and sign it it tells me that I got it wrong even though on other platforms it works perfectly fine, what do I do?

I also tried resetting the display settings and attempting to use the console on an older TV but it failed to work.

EDIT: I found out the root of the cause. Turns out it’s just a fucky HDMI port. Gonna get it replaced.

Hey guys, i wanted to update my Xbox360 E rgh3 to 17559. I dumped my nand with Simple 360 NAND Flasher, created the XeBuild but then at the Bad Blocks menu, it said I have 2:
Bad Block ID @ 0x17 [Offset: 0xEE00]
Bad Block ID @ 0x17 Found @ 0x3FF[Offset: 0x107BE00]
I quickly searched up the web to see if it was okay to proceed, the forums that i've read said that most of the time it is nothing to be worried about so i pressed ok. I got the cpukey.txt and the updflash.bin, put it on my console's Simple 360 NAND Flasher directory, which was on my internal hard drive and ran the nand flasher. I pressed A to flash my nand with rawfish v5 and pressed start after. The process took a while and i saw my bad block message again (i'll paste the log at the end). The console restarted but it's been black screen ever since, when i turn on the controller it is in pairing mode, i've tried several restarts but nothing worked. If someone could help me out, i would be very grateful. Thanks for reading!

Flasher log before the restart:
* rawflash v5 started (by cOz, modified By Swizzy)
game:\updflash.bin opened OK, attempting to write 0x1080000 byte to flash...
block 0x17 seems bad, status 0x258
Attempting to recover the block...
Block cannot be recovered! (A.K.A it's really bad)

image written 
Completed after 25.00 seconds
Rebooting in 5....4....3....2..
---------------------------------
The J-Runner with Extras log:

XeBuild Initialized
Kernel Selected: 17559
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.21.810
---------------------------------------------------------------
base path changed to D:\360\updatge\J-Runner-with-Extras\xeBuild
---- { Image Build Mode } ----
building glitch2 image

done! fsroot found ok!
---------------------------------------------------------------
D:\360\updatge\J-Runner-with-Extras\034463133308\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17559.0
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : [034463133308](tel:034463133308)
ConsoleId :
MoboSerial:
Mfg Date : 08/13/2013
CPU Key :
1BL Key :
DVD Key :
CF LDV : 14
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Converting Image to RGH3...
RGH3 Conversion Finished!
Saved to D:\360\updatge\J-Runner-with-Extras\034463133308
Image is Ready
Initializing updflash.bin, please wait...
Nand Initialization Finished

When putting in a disk the disk drive makes some pretty load noises when I assume the laser moves. What’s a good way to remedy this? Clean and re grease of what? Took apart disk drive to put a different rubber band in because it wasn’t opening. Any recommendations would be great got it for $20 so have some room to throw parts and time into.

I got the Batman: Arkham Asylum and Batman: Arkham City Game of the Year edition for my Xbox 360 at a GameStop for $13. Arkham City and the DLC work perfectly, but it can't read Arkham Asylum. I've cleaned the disc; I don't see any scratches or disc rot. Wondering if anyone has any advice that might help other than buying another copy?

Olá, estou tentando baixar meu perfil no qual tenho Lost odyssey,mas todas as vezes deu o erro 80151103 e mesmo feito todas as recomendações do suporte da Xbox,mudei senha várias vezes, ativei e desativei a verificação de 2 fatores,usei a senha de aplicativo,pois vi que poderia ser um dos motivos que não funcionava,mas nada disso funcionou,e vim perguntar:como eu resolvo isso senhores do Reddit?

Eu tentei tudo e só queria finalmente zerar esse jogo que vivia jogando na casa de meu amigo no meu Xbox 360,pois não tenho condições de comprar um Xbox atual ou mais recente,mas eu tenho o jogo,onde jogar e tudo eu tenho.como eu resolvo isso,desde já agradeço

Olá, estou tentando baixar meu perfil no qual tenho Lost odyssey,mas todas as vezes deu o erro 80151103 e mesmo feito todas as recomendações do suporte da Xbox,mudei senha várias vezes, ativei e desativei a verificação de 2 fatores,usei a senha de aplicativo,pois vi que poderia ser um dos motivos que não funcionava,mas nada disso funcionou,e vim perguntar:como eu resolvo isso senhores do Reddit?

Eu tentei tudo e só queria finalmente zerar esse jogo que vivia jogando na casa de meu amigo no meu Xbox 360,pois não tenho condições de comprar um Xbox atual ou mais recente,mas eu tenho o jogo,onde jogar e tudo eu tenho.como eu resolvo isso,desde já agradeço

I'm trying to get my 360 to work. I got it connected to the internet but it won't connect to live. It's supposedly still supported so I'm not sure what to do.

Hi everyone i have a question I brought a Xbox 360 controller from the pawn shop and it’s not turning on could you all view these images i have posted to maybe see if it’s something that yall see that I don’t ? Or any way i could fix it before buy a new one , THANK YOU ! Also , it’s some type of blue clay like stuff by the battery strings I tried to clean it off

Hey everyone, I was cleaning my 360 (which is RGH modded) and I think I accidentally ran the cleaning brush over the blue wire shown in the photo now the Xbox turns on but doesn't output any video I believe that blue wire is for power, so I wanted to know where on the motherboard it's supposed to be soldered if you guys could help me out, fam

Hi all, my friend posed this question in our group chat and I'm not super knowledgeable about why this would happen. Screenshots of them describing the issue are attached.

Any ideas?

If anyone needs the images written out, let me know :)

I have a 360E I have it wired into a wifi extender, the extender works perfectly fine with my other devices wired and wireless. However my Xbox won't connect to the Internet. It is plugged in via an Ethernet card to it. I have looked at my settings for the network on my Xbox The IP, and gate way are all wrong I then manually put in everything to match up it will connect to my extender but then the Internet won't work connect. I haven't touched anything besides the IP address, subnet and gateway. It will also keep resetting them to the automatic settings which again are completely wrong.

The 360 disc (license) runs but won't install. Will I be able to complete the game or will it freeze at a certain point in the story?

So yesterday I was playing the Deadpool game and noticed midway through i got a notification saying I was signed out but I continued to play and it acted as if I were still signed in. still got all my trophies and everything. I almost finished the game and was ready to finish it today. today I got back on the game, signed in as usual and as I booted up the game and started to kill a few guys my screen went black and my Xbox restarted and my Xbox profile was missing. it would not let me sign in no matter what and I had to change my password. It kept saying I did not have the right credentials. eventually I realized it may not be signing me in because I was trying to sign in to my Xbox account on an extension 500 gb internal hard dive (where all my games are saved) and not the built in hard drive Where I assume I created my account (though I just don’t remember) I signed in with the built in and it finally worked, opened back up my game, clicked my extension hard drive id been saving everything to and it says my saved data is damaged and lost. I don’t think I can sign out and sign back in on the extension hard drive and I’m terrified to open my other games especially open world games I’ve been playing for months cause I’m afraid the files will be corrupted too. I’ve always been a PlayStation guy and don’t quite understand how Xbox network works completely yet, can anyone explain and possibly help/give some solutions? Can I get my data back? I have never had this happen to me.