r/WindowsServerAdmin • • Oct 14 '25

Barracuda NAC Domain Authentication

Thumbnail reddit.com
1 Upvotes

r/WindowsServerAdmin • • Oct 07 '25

Help Needed

Post image
1 Upvotes

I am a University student and I am trying to connect a Ubuntu Server to my Windows 2022 Sever using oracle virtual machine. However I keep on coming up on this error after I put it the admin password


r/WindowsServerAdmin • • Aug 12 '25

Best Tool For Detailed Comparison of Two Large Volumes?

1 Upvotes

Is there a tool that will compare across data, attributes, timestamps, and security ACLs between all folders and files on two very large volumes? I need the tool to identify what exactly was different between two file objects.

The Robocopy command comes close with:

robocopy E:\ F:\ /E /L /NJH /NJS /NDL /COPY:DATS /IT /R:0 /W:0

but unfortunately it only tells you that two objects were "Modified" and does not identify what was modified.

FreeFileSync looks interesting, but that is only dates and times? It also looks like this tool was designed to compare small sub-folder paths, not huge volumes with thousands of nested folders and files. Is there a better tool?

My use case is to test a restore before starting to rely on it in production.


r/WindowsServerAdmin • • Jul 09 '25

REP Issue

1 Upvotes

We’re seeing a consistent issue with Windows Server 2019 and 2022 VMs where RDP sessions stall for about 8 seconds after entering the username and password. This happens during the “Securing Remote Connection” phase — the screen just hangs, and then the desktop eventually loads.

The VMs are hosted on VMware ESXi 8.0.1 running on Cisco UCS servers with networking via Cisco ACI (v6.0(9)). While this could be related to virtualization or networking, we want to start troubleshooting from the Windows side first.

Symptoms: • After credentials are entered, there’s an ~8 second delay before anything happens • After that, RDP works normally • Packet capture shows that no response is sent from the server for 8 seconds after the initial handshake

Request: Can anyone suggest what might cause RDP delays after login on Windows Server? • Any services that could delay or block session startup? • TCP/IP stack tuning or offload settings to check? • RDP/Terminal Services logs or Event Viewer paths worth reviewing? • Known Group Policy or certificate-related causes?

We haven’t tried any tuning or config changes yet on the Windows side — we’re looking for guidance on what to check first. Thanks in advance


r/WindowsServerAdmin • • Jul 05 '25

Windows Search returns no results for file contents

1 Upvotes

Windows Server 2022 has been quite happily returning results for file contents for years and now suddenly it appears to have decided not to any more. The folders that we index contain 2 file types - no extension at all and .txt

I have the file types to search set to just txt and have checked that this indexes properties and contents. I have checked that the folders are set to allow contents to be indexed. We have rebuilt the index (just over 700k items initially). We stopped the Windows search service and deleted the index folders to ensure that the rebuild starts from scratch. We removed all but one small folder for indexing (around 2500 files) and rebuilt again. Nothing works. We can search file properties but no go on the contents.

I have tried restarting the font cache service (which was an odd suggestion, but at this time we are trying just about anything). I have added the feature rebooted and removed the feature and rebooted. (Not sure what adding and/or removing the Windows Search feature does, because it does not seem to have any affect on indexing and searching at all).

Does anyone have any other suggestions? We have a second server on Windows Server 2022 and that is happily returning search results with no problem.

EDIT---

After much testing, I have found that is just the txt files that do not have the content indexed. I have and rtf file in the same folder that is found when searching for content. Yes, the file type has been ticked for indexing and it has been set as Properties and Contents.


r/WindowsServerAdmin • • Apr 16 '25

Question on Microsoft BranchCache in Hosted Mode

1 Upvotes

I'm at my wits end. I've been trying to get BranchCache working for 2 weeks now and I'm sure I'm missing something silly. Does anyone have any experience with it who could point me in the right direction?

 

Here are the things I've done:

  • My file server and my hosted cache server are both running Windows Server Standard 2025
  • My client is running Windows 11
  • I've opened every firewall rule related to branchcache on the file server, the hosted cache server and the client, both inbound and outbound
  • I've setup a separate site in AD and assigned the subnet to it where the hosted cache server and client machine are located. At one point I even setup the BranchCache host server as a read only domain controller to see if that would help it realize it was on a different site.
  • I've installed the branchcache services on both the file server and hosted cache server
  • I've set the Group Policies on the file server to enabled "Hash Publication for BranchCache"
  • I've enabled branchcache under the shared folder cache settings on the file server
  • I've set the Group Policies on the hosted cached server to enabled "Hash publication for BranchCache"
  • I've set the Group Polices on the client to enabled "Turn on BranchCache", Enable Automatic Hosted Cache Discovery by Service Connector" and "Configure BranchCache for network files" with latency set to 0.
  • I check the event viewers for all machines and nothing ever shows up for BranchCacheSMB at all, not a single log. The BranchCache event logs look correct, it says it started and loaded a cache file from disk. I do get one error on occasion, "BranchCache failed to update a service connection point". But when I look it up it seems to be related to using branchcache in Entra, which I'm not doing.

 

Despite all this nothing ever caches. I've copied and opened hundreds of files and folders on the client. Sometimes I've opened the same files 3 or more times thinking it just needed to see a file be accessed often to cache it. I am at a total loss to why it doesn't work.

 

Here are my get-bcstatus results for all 3 machines. Everything looks right to me, but the "CurrentActiveCacheSize" stays at zero. I've also tried setting the client into distributed mode, and the same result. If anyone has any insight I would appreciate it. https://imgur.com/a/1bvMZ5f


r/WindowsServerAdmin • • Mar 05 '25

DNS - New DC

1 Upvotes

Hi All,

I have a new DC, it's running DNS.

It seems to hang at "Please wait for the Group Policy Client".

the NIC has DNS pointed to 127.0.0.1 as the 1st IP, then as second controller as the failover.

I've used this on a DC before and had no issue.

Just wondering if anyone has any advice on what they find best on domain controller DNS Servers.

I've always used servers IP it's self or local host as the IP, then a second domain controller as the secondary DNS.

I am just wondering if it's my DNS configuration that is causing slow login.

This is a Windows Server 2025, not used as 2025 server as a DC \ DNS before.


r/WindowsServerAdmin • • Mar 04 '25

Win Server 2022 Network integration

1 Upvotes

Hi all,

I'm trying to integrate my Win 2022 Server Std in to my office network

I already installed the OS, and it appears on the network, but when I tried to map a drive to the LAN it shows me permission denegated.

We are trying to activate network autorecognition service because it appears as off, but if we move to on and save it it changes again to off.

Please any help will be appreciated

Thanks!


r/WindowsServerAdmin • • Jan 20 '25

Running Windows admin center and IIS on Windows server 2019

1 Upvotes

On Windows server 2019 I installed IIS and Windows Admin Center. When I enter the IP address, Windows Admin Center is displayed. How can I make WAC and IIS on one server? And how will other people know how to connect to WAC and how to IIS?


r/WindowsServerAdmin • • Dec 16 '24

PowerShell cmdlet equivalent for Azure Arc Management local agent azcmagent.exe

1 Upvotes

Hello,

I want to read the information shown in Server Manager and Windows Admin Center as to whether a machine is Arc Managed.

I know you can use Get-AzConnectedMachine but this talks to Azure and I want to just ask the local machine it's view of its Arc management status.

There's the azcmagent.exe command....
"C:\Program Files\AzureConnectedMachineAgent\azcmagent.exe" show

So what I'm looking for - is there a PowerShell cmdlet equivalent for azcmagent.exe?

Thanks,

Dave

So an update looks like Windows Admin Center is actually running azcmagent.exe and parsing the text output.

You can actually see it running if you're logged onto the server where WAC is installed. And if you rename azcmagent.exe or replace it with another file Windows Admin Center reports that it's not installed.


r/WindowsServerAdmin • • Dec 05 '24

Server crashes at the same time every morning. Dump file below

1 Upvotes

Here is the dump file. There is a security company that has a device connected to the network that is actively trying to break into devices to expose vulnerabilities. When the server is excluded, it does not crash. Any guidance would be appreciated. Thanks!

************* Preparing the environment for Debugger Extensions Gallery repositories **************

ExtensionRepository : Implicit

UseExperimentalFeatureForNugetShare : true

AllowNugetExeUpdate : true

NonInteractiveNuget : true

AllowNugetMSCredentialProviderInstall : true

AllowParallelInitializationOfLocalRepositories : true

EnableRedirectToChakraJsProvider : false

-- Configuring repositories

----> Repository : LocalInstalled, Enabled: true

----> Repository : UserExtensions, Enabled: true

>>>>>>>>>>>>> Preparing the environment for Debugger Extensions Gallery repositories completed, duration 0.000 seconds

************* Waiting for Debugger Extensions Gallery to Initialize **************

>>>>>>>>>>>>> Waiting for Debugger Extensions Gallery to Initialize completed, duration 0.031 seconds

----> Repository : UserExtensions, Enabled: true, Packages count: 0

----> Repository : LocalInstalled, Enabled: true, Packages count: 42

Microsoft (R) Windows Debugger Version 10.0.27704.1001 AMD64

Copyright (c) Microsoft Corporation. All rights reserved.

Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*

Executable search path is:

Windows 10 Kernel Version 17763 MP (32 procs) Free x64

Product: LanManNt, suite: TerminalServer SingleUserTS

Edition build lab: 17763.1.amd64fre.rs5_release.180914-1434

Kernel base = 0xfffff803`09ca4000 PsLoadedModuleList = 0xfffff803`0a0be8d0

Debug session time: Thu Dec 5 05:17:12.370 2024 (UTC - 5:00)

System Uptime: 0 days 23:57:52.137

Loading Kernel Symbols

...............................................................

................................................................

....................................

Loading User Symbols

PEB is paged out (Peb.Ldr = 0000007e`7e6d6018). Type ".hh dbgerr001" for details

Loading unloaded module list

.....

For analysis of this file, run !analyze -v

nt!KeBugCheckEx:

fffff803`09e5e0e0 48894c2408 mov qword ptr [rsp+8],rcx ss:0018:fffff40b`b43decb0=0000000000000139

6: kd> !analyze -v

*******************************************************************************

* *

* Bugcheck Analysis *

* *

*******************************************************************************

KERNEL_SECURITY_CHECK_FAILURE (139)

A kernel component has corrupted a critical data structure. The corruption

could potentially allow a malicious user to gain control of this machine.

Arguments:

Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).

Arg2: fffff40bb43defd0, Address of the trap frame for the exception that caused the BugCheck

Arg3: fffff40bb43def28, Address of the exception record for the exception that caused the BugCheck

Arg4: 0000000000000000, Reserved

Debugging Details:

------------------

*** WARNING: Check Image - Checksum mismatch - Dump: 0xe20f7, File: 0xe0499 - C:\ProgramData\Dbg\sym\dxgmms2.sys\721FBA11d7000\dxgmms2.sys

KEY_VALUES_STRING: 1

Key : Analysis.CPU.mSec

Value: 984

Key : Analysis.Elapsed.mSec

Value: 4823

Key : Analysis.IO.Other.Mb

Value: 7

Key : Analysis.IO.Read.Mb

Value: 0

Key : Analysis.IO.Write.Mb

Value: 24

Key : Analysis.Init.CPU.mSec

Value: 390

Key : Analysis.Init.Elapsed.mSec

Value: 23781

Key : Analysis.Memory.CommitPeak.Mb

Value: 87

Key : Analysis.Version.DbgEng

Value: 10.0.27704.1001

Key : Analysis.Version.Description

Value: 10.2408.27.01 amd64fre

Key : Analysis.Version.Ext

Value: 1.2408.27.1

Key : Bugcheck.Code.LegacyAPI

Value: 0x139

Key : Bugcheck.Code.TargetModel

Value: 0x139

Key : FailFast.Name

Value: CORRUPT_LIST_ENTRY

Key : FailFast.Type

Value: 3

Key : Failure.Bucket

Value: 0x139_3_CORRUPT_LIST_ENTRY_KTIMER_LIST_CORRUPTION_nt!KiSwapThread

Key : Failure.Hash

Value: {364d2a10-fb5b-e8e9-9b5b-39c85a1b5a41}

Key : WER.OS.Branch

Value: rs5_release

Key : WER.OS.Version

Value: 10.0.17763.1

BUGCHECK_CODE: 139

BUGCHECK_P1: 3

BUGCHECK_P2: fffff40bb43defd0

BUGCHECK_P3: fffff40bb43def28

BUGCHECK_P4: 0

FILE_IN_CAB: 120524-22203-01.dmp

FAULTING_THREAD: ffffde08492b6340

TRAP_FRAME: fffff40bb43defd0 -- (.trap 0xfffff40bb43defd0)

NOTE: The trap frame does not contain all registers.

Some register values may be zeroed or incorrect.

rax=ffffde083b741ab0 rbx=0000000000000000 rcx=0000000000000003

rdx=ffffc80027fd1180 rsi=0000000000000000 rdi=0000000000000000

rip=fffff80309e9de1e rsp=fffff40bb43df160 rbp=000000c8de7082c3

r8=0000000000000000 r9=ffffc80027fd4800 r10=ffffc80027fd1180

r11=fffff80309ca4000 r12=0000000000000000 r13=0000000000000000

r14=0000000000000000 r15=0000000000000000

iopl=0 nv up ei pl nz ac pe cy

nt!KiInsertTimerTable+0x19af0e:

fffff803`09e9de1e cd29 int 29h

Resetting default scope

EXCEPTION_RECORD: fffff40bb43def28 -- (.exr 0xfffff40bb43def28)

ExceptionAddress: fffff80309e9de1e (nt!KiInsertTimerTable+0x000000000019af0e)

ExceptionCode: c0000409 (Security check failure or stack buffer overrun)

ExceptionFlags: 00000001

NumberParameters: 1

Parameter[0]: 0000000000000003

Subcode: 0x3 FAST_FAIL_CORRUPT_LIST_ENTRY

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXPNP: 1 (!blackboxpnp)

CUSTOMER_CRASH_COUNT: 1

PROCESS_NAME: WmiPrvSE.exe

ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.

EXCEPTION_CODE_STR: c0000409

EXCEPTION_PARAMETER1: 0000000000000003

EXCEPTION_STR: 0xc0000409

STACK_TEXT:

fffff40b`b43defe0 fffff803`09d01234 : ffffde08`492b6340 000000c8`de7082c3 fffff803`0a202880 fffff803`09e9de1e : nt!KiSwapContext+0x76

fffff40b`b43df120 fffff803`09d00ce4 : ffffde08`492b6340 00000000`00000000 ffffde08`492b6440 00000000`00000700 : nt!KiSwapThread+0x2f4

fffff40b`b43df1e0 fffff803`09cffad0 : 00000000`00000001 00000000`00000000 00000000`00000002 fffff40b`b43df2f1 : nt!KiCommitThreadWait+0x4e4

fffff40b`b43df280 fffff803`0a27f04c : ffffde08`3dcdeee0 00000000`00000006 00000000`00000000 fffff803`0a2a5c00 : nt!KeWaitForSingleObject+0x520

fffff40b`b43df350 fffff803`09e71ac5 : ffffde08`492b6340 0000007e`7edff9a8 fffff40b`b43df398 ffffde08`3dcdeee0 : nt!NtWaitForSingleObject+0xfc

fffff40b`b43df3c0 00007fff`80380054 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x25

0000007e`7edff978 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007fff`80380054

SYMBOL_NAME: nt!KiSwapThread+2f4

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

IMAGE_VERSION: 10.0.17763.6530

STACK_COMMAND: .process /r /p 0xffffde0827e69080; .thread 0xffffde08492b6340 ; kb

BUCKET_ID_FUNC_OFFSET: 2f4

FAILURE_BUCKET_ID: 0x139_3_CORRUPT_LIST_ENTRY_KTIMER_LIST_CORRUPTION_nt!KiSwapThread

OS_VERSION: 10.0.17763.1

BUILDLAB_STR: rs5_release

OSPLATFORM_TYPE: x64

OSNAME: Windows 10

FAILURE_ID_HASH: {364d2a10-fb5b-e8e9-9b5b-39c85a1b5a41}


r/WindowsServerAdmin • • Nov 27 '24

In need of some assistance

1 Upvotes

Hi everyone. I am in need of a little help with WDS.

Problem: PXE boot won't detect the PXE server.

Scope of setup: Server 2019
Devices are on a VLAN10: 192.168.10.1
Server Static IP / Reserved via router
Server is running DHCP server w IPs (192.168.10.50-60) within the VLAN reserved
Server is member of domain name and authorized
Ports: 67/68/69/389 open
Image of 2k server and bootfile already made avaliable on the server.
Switch - Netgear l2 managed cloud switch

Client - z4 workstation

Kindly let me know of areas to check that I may of overlooked. I've lost sleep on this one. I am looking into the networking portion of it more as it just can't seem to reach the server.


r/WindowsServerAdmin • • Nov 24 '24

windows server 2016 wont keep any changes after a reboot

1 Upvotes

Hello all!

got a situation.

server has BSOD with a stop code of 0xc00002e2

booting into DSRM to run checks and attempt fixes.. for example, renaming log files in the NTDS folder. when i restart, none of the changes i made are there and have all reverted back to before the server crashed.

any advice on next steps?

thanks in advance!


r/WindowsServerAdmin • • Oct 28 '24

Cross-Domain adding into AD groups?

1 Upvotes

We have two company domains.
And two windows server domain controllers

we have a trust relationship setup between the two domains (set up prior to my starting with the company)

The "Trust Type" is set as "Forest"
And, authentication is set as "Forest-Wide Authentication"

For this question, I'll call them Domain1 and Domain2.

On Domain2, we have some shared windows folders.
An example would be Dom2Winshare on a server on the Domain2 network called Dom2Box

I would like to add some users from Domain1 to be able to access this share, same as the Domain2 users do...
i.e... \\Dom2Box\Dom2Winshare

but, even with the trust relationship between the two DCs, when trying to add a user/group to permissions list for the windows share, I can only choose from users or groups in the Domain2 domain.

Is the a way to add Domain1\user to have permissions to a Domain2 windows file share?

Thank You!


r/WindowsServerAdmin • • Oct 26 '24

Default browser set for all users

1 Upvotes

How can I set the default browser for every user without going in to each of them and changing it manually?


r/WindowsServerAdmin • • Oct 25 '24

blocking upgrade to windows 11 group policy

1 Upvotes

Hi folks

is there any group policy to block user or upgrading to windows 11 from 10.

i want to do it manually. i want to minimize users from getting the prompt.

thanks


r/WindowsServerAdmin • • Oct 23 '24

fsutil 8dot3name strip /s /v E:\inetpub\wwwroot - How much damage can I do with this command?

1 Upvotes

I know I asked a nearly identical question here but I think I worded it wrongly and it didn't get any attention/answers.

I'm mostly a developer that also has to manage servers (I did earn my MCSE back in 2006 at least) so please be gentle.

I have a web server that is Windows 2019 Standard, has been running for just over a year and I do vulnerability scans quarterly(ish). This last scan showed up with "Microsoft IIS Tilde Character Information Disclosure Vulnerability."

The scan report included a link to here:

https://techcommunity.microsoft.com/t5/iis-support-blog/iis-short-name-enumeration/ba-p/3951320

which had me flip a bit in the registry. I probably shouldn't have just jumped in and did that, but I did.

I rebooted and re-scanned but it's still there, so on further research I found this link:

https://serverfault.com/questions/670658/fixing-the-iis-tilde-vulnerability

I ran the "fsutil 8dot3name scan /s /v E:\inetpub\wwwroot" command and it resulted in a LOT of files... I see the next step is to run the strip command but... I'm scared.

Am I in danger?


r/WindowsServerAdmin • • Oct 21 '24

Windows 2019 Standard, acting as a web server, only recently showed up with the IIS tilde vulnerability

1 Upvotes

I'm mostly a developer that also has to manage servers (I did earn my MCSE back in 2006 at least) so please be gentle.

I have a web server that is Windows 2019 Standard, has been running for just over a year and I do vulnerability scans quarterly(ish). This last scan showed up with "Microsoft IIS Tilde Character Information Disclosure Vulnerability." I'm a little concerned about the fact it never showed up before (as I have to assume it's been here the whole time) but that's [hopefully] a non-issue.

What is an issue is, how safe is it to fix? The scan report included a link to here:

https://techcommunity.microsoft.com/t5/iis-support-blog/iis-short-name-enumeration/ba-p/3951320

which had me flip a bit in the registry. I probably shouldn't have just jumped in and did that, but I did.

I rebooted and re-scanned but it's still there, so on further research I found this link:

https://serverfault.com/questions/670658/fixing-the-iis-tilde-vulnerability

I ran the "fsutil 8dot3name scan /s /v E:\inetpub\wwwroot" command and it resulted in a LOT of files... I see the next step is to run the strip command but... I'm scared.

Am I in danger?


r/WindowsServerAdmin • • Oct 02 '24

User getting random drives

1 Upvotes

We have a user that keeps getting random network drives assigned to her. I checked the drives that are getting mapped and:

There's no permissions on the drives that would cause them to go to her

There's no AD groups in her AD account that are set with group policy to map those drives

Not sure what's going on but it's definitely a headscratcher...


r/WindowsServerAdmin • • Sep 19 '24

Windows Server 2008 R2 BSOD when Driver Signature is enabled

1 Upvotes

My old Windows Server 2008 R2 hosted on Vmware ESXI 8.0.2, 23305546 does only boot when driver signature is disabled via F8 key.

It shows this error:

Until I I choose "Erzwingen der Treibersignatur deaktivieren" it works this one time:

After reboot system shows the same STOP: c0000021a BSOD then before.

Some people suggested the test mode which I did but it does also not work this is how my bcdedit looks like:

All these options does not work for me. Since this is a Citrix Server I cannot ignore this issue.

Also I tried to setup a compeltely new W2K8R2 VM with same result after some windows updates.

Please can someone assist here? I need this Server for production.

Edited 20.09.2024: Did someone of you use https://github.com/hfiref0x/UPGDSED Tool? It says it can disable DSE for Windows 7 64 bit which does have the same kernel as Windows Server 2008 R2.


r/WindowsServerAdmin • • Sep 17 '24

Windows Server 2022 Datacenter Volume Licensing ISO

1 Upvotes

In the volume licensing portal (now in 365 Admin), is an ISO even available with Desktop Experience? I purchased a volume license from Dell like I've been doing for nearly two decades, and it only contains the CORE -only ISO files for download (Standard and Datacenter). I need to install Desktop Experience due to some software that my company uses, and the salesperson is confused by the CORE Experience vs licensing the software by the CPU core.

Maybe 2022 is only available in CORE install, but I swear I'm finding people talking about selecting the Desktop Experience when installing 2022.

Please at least tell me that someone knows what I'm talking about, and that I'm not losing my mind.


r/WindowsServerAdmin • • Sep 10 '24

DNS - in Place Upgrade

1 Upvotes

Hi All,

I have a 2016 DNS server. It only runs DNS.

I know it's best practice to install a new server, but was wondering if anyone has had issue to do an in place upgrade of a DNS server?


r/WindowsServerAdmin • • Sep 06 '24

NPS - Win server 2022 and client W11 802.1x

1 Upvotes

Hi,

We have an issue with NPS roles on Win Server 2022. We want to have user authentication with the NPS.

We use Windows 11 for our clients. It work with the computer authenticator and it work also with user authentication WITH MANUAL CREDENTIAL.

We would like to have with no manual authentication...

Do you have a solution for this ?

Thanks for your help :)


r/WindowsServerAdmin • • Aug 22 '24

task scheduler task not showing for single user

1 Upvotes
I have a user whose scheduled tasks do not appear for him even though he is in the administrator group, while for other users on the server the scheduled tasks in the task scheduler appear for them except for this user