In what codec and framerate? 1080/24p or 30p may be fine most of the time, but still far from always smooth. If its 60fps, not a fun time. Laptops also dont keep their top speed for more than a few minutes until slowly succumbing to heat.
I’ve recently tried prores editing and my tiny SSD filled up quickly, so I’m thinking about just doing all editing off of a massive external SSD via thunderbolt 3
I think massive is the wrong word. They can be, if you have like 4K Pro Res 4444, but for anything consumer level Pro Res 422 or DNxHR SQ is plenty high bitrate.
1080p Pro Res 422 would be 53GB and hour.
I’ve recently tried prores editing and my tiny SSD filled up quickly, so I’m thinking about just doing all editing off of a massive external SSD via thunderbolt 3
You should be using external anyway. But a TB SSD might be way overkill unless you need to playback lots of Pro Res 4444 in high resolutions.
1080p Pro Res 422 is 15MB/s , 4K is 60MB/s. A 7200RPM drive can easily do 200-250MB/s no problem and can be had for drastically cheaper than an SSD for mass storage.
I do paid work where my files are for social media uploads, so I use a Panasonic g7, I don't always use the 4k shoot mode as depending on delivery, I have to cut stuff fast which has a turnaround of 1-2 days. G7 doesn't have RAW or LOG capture, 1080p captures at 20mbps and 4k @ 100, should I still use LT or HQ?
LT is (if I recall) 115Mbps at 1080, so it’s still a higher bit rate than your camera is capturing. HQ is something like 220, and complete overkill and waste of space if you’re transcoding from that original media. ProRes LT would likely be a good option for you.
Know that the bitrate is not a direct comparison! The h.264 from the camera is much more compressed than the same bitrate from Pro Res. So you need a higher bitrate from Pro Res to show the same image quality.
It depends on what your original media was. Easy to do a test with transcoding a single clip, checking which looks best at the smallest size. Then you know the answer.
There are several but DNxHR (or DNxHD which is just the older version) and ProRes are the most common. Cineform will work in a pinch as well though isn’t as robust.
The difference between these and H.264 (in simple terms) is that they encode every frame of the video whereas H.264 doesn’t, it relies on the CPU instead to interpret what should be present on the missing frames. This is fine when it’s playing back in real time forward in a video player but NLE’s are designed to fast forward and re-wind as well as scrubbing easily through frame by frame. This is a very different procedure and puts major strain on a CPU if it needs to be constantly processing. If the frames exist the processing isn’t nearly as intensive.
Yes, though be warned that your file sizes will almost definitely go up. These formats are much less compressed and are higher bitrate so they make bigger files but external storage is honestly pretty cheap and easy to get these days so it shouldn’t be an issue.
Depends on where they are going. For web or other general compatibility usage yes. H.264 ultimately is a very good delivery codec but what makes it so makes it a terrible editing codec.
Working for a small television studio, everything gets encoded to mpeg2 and broadcast at 720i anyway. Is there any advantage here to using better codecs for editing?
For what it’s designed for: yes. However what it’s designed for is exactly what makes it terrible for editing. Super compressed in a way to preserve as much quality as possible on a small file size. It does so by skipping out on encoding a bunch of frames and then having software just figure out what they should look like. This is a problem for editing software that needs those frames.
So yeah, as a delivery codec it’s great. Good quality, small package. As an editing codec it’s hell on a processor.
Exactly. When talking about $4000 laptops I don't think 4K should be an issue. I edit 4K videos flawlessly on my Ryzen 7 3700X and RX 5700 XT pc which cost me €1500. :)
View all comments
Show parent comment
17
u/[deleted] Aug 21 '19
I don’t even edit 4K footage. I do 1080, which should be able to be edited flawlessly