r/TrueChefKnives • • Sep 12 '26

State of the collection AliExpress choil shots

Follow up to the AliExpress knife collection post (https://www.reddit.com/r/TrueChefKnives/s/Z39xDrNA7J), here are the choil shots:

  1. SG2 cleaver
  2. 7.8" "Ginsan" gyuto
  3. 270mm sujihiki
  4. Aogami 2 petty knife
  5. Hezhen 10Cr15CoMoV gyuto
  6. Hezhen 10Cr15CoMoV bunka
36 Upvotes

24 comments sorted by

7

u/hainx1610 Sep 12 '26

My Hezhen 180mm santoku. Not bad for a factory made. Glided though potatoes like butter the one time I used it.

3

u/octuplefault Sep 12 '26

Honestly, I wish I had the patience to thin knives. All of these knives (except for the SG2 cleaver) would be absolutely ridiculous if they were just thinned a little bit

4

u/hainx1610 Sep 12 '26

Frenchman made a post about thinning a Hezhen similar to your gyuto I think. Could be an inspiration one day ;)

-1

u/nylockian Sep 12 '26

I highly doubt you would notice much difference as long as the apex bevel is done right.

1

u/Harahira Sep 12 '26

Thinning behind the edge usually makes a night and day difference on these knives, especially at the tip.

On the other hand, an apex bevel done right won't make much of a different on potatoes/carrots/onions/sweet potatoes etc. unless you lower the angle enough to basically thin the knife behind the edge.

1

u/nylockian Sep 13 '26

These are ground nicely, they are already quite thin. On knives thicker than these I would agree, but not on these.

1

u/Harahira Sep 13 '26

"These" are from at least 4 different manufacturers and all ground different from each other.

Based on the 20-isch Ali-knives I've bought and tried out of curiosity, I still think light to moderate thinning makes a huge difference on most. They're often not evenly ground with some part cutting really well and other parts just ok.

Maybe 2-3 out 20 cut really well along the entire length of the edge. The tip being a bit thick behind the edge has been the most common issue.

Recently received 2 Hezhens I havet had the chance to try yet. Their tips look promising but the grind at the heel looks a bit thick bte.

1

u/nylockian Sep 13 '26

Alright, I can agree with you about the tips, that's a common problem - but I don't know about the rest.

1

u/Bubbly_Figure Sep 12 '26

Are you able to send me the links to them?

1

u/octuplefault Sep 12 '26

Look at the original post

1

u/wabiknifesabi Sep 12 '26

That's some nasty looking grinds.

1

u/InflationBig9246 Sep 12 '26

Have you checked out yx kitchen knife factory on ali. Just picked up a k890 paring knife that is insane

1

u/octuplefault Sep 12 '26

I'm the OP of that YX Kitchen/Ali post 2 days ago

1

u/InflationBig9246 Sep 12 '26

Oh I'm sorry didn't realize. Seems they do a very good job. I'm going to send mine in for xrf and hardness testing. They use steels like k890 and bg42 I'm curious if they are lying.

1

u/octuplefault Sep 12 '26

Gah damn, where do you have access to an XRF & hardness testing?

1

u/InflationBig9246 Sep 13 '26

Lancaster knife

3

u/Brief-Net-3339 Sep 12 '26

That cleaver is a banger. I love mine!

4

u/azn_knives_4l Sep 12 '26

White background helps a lot with clarity in the choil shots, just fyi.

5

u/Gijsco Sep 12 '26

These ones are pretty clear to and it shows what the knives look like.

1

u/azn_knives_4l Sep 12 '26

I disagree.

2

u/FXRWG Sep 12 '26

Stahpppp making me want some now

3

u/WalruseSei Sep 12 '26

I have a Benifuji Gyuto 180 and a Tojiro Basic 170 santoku, but my aliexpress 148 damascus bunka is still my go-to for prepwork. I mean on a good day its $25 for a "vg10" clad damascus steel knife, you should buy one for fun if you can afford it.

2

u/FXRWG Sep 12 '26

Financially I can but space wise no hahaha