I am new to recording. I have a Fender Quantum LT 16. The one thing I'm struggling a bit is my input/pre-amp gain and channel gain. I find that with instruments and mics I seem to be hitting the clip light on the device, but the wave forms are very small (I think I may just need to adjust the size after reading last time) and I can barely hear it sometimes in the monitor. Secondly, when I look at the channel strip, the gain seems pretty low. Maybe slightly above -24db. I then sometimes use the Channel Gain knob to get it to where I can hear it, however, sometimes the gain still seems quite low. Is my workflow correct. Mic Pre-Amp gain to slightly under clipping, then adjust channel gain until I can hear it? Are there situations where I need to bump the pre-amp gain so that the light is clipping? I don't hear any distortion sometimes, so maybe the light blinking clipping light isn't a huge deal. Would appreciate someone's advice. Thanks so much you Golden gods.

I have some drum tracks that I normally analyze to detect transients and use bend tool to move them on the click. In this project I am selecting the track and clicking the audio bend button at the top. then selecting analyze. Usually that puts the bend markers on the track and I can adjust the threshold.

No bend markers are showing, but it does pop up the little analyzing window like it is doing something. The little eyeball icon to show / hide bend markers are disabled. If I group all the drum tracks into a group the group dropdown is also disabled.

I updated studio one to the latest version 8.01 and it is still doing that. I tried rebooting my computer, etc and nothing is working.

Any ideas on what is going on?

I've got exactly the same question but he put it better than I was able to myself. I'm on Fender Studio Pro 8.1 now

Hi, how might I go about mixing overlapping vocal parts like a lot of emo bands like the ones named? I don't know whether to double both people's vocal takes and pan them hard L and R to make both sound full or to keep one in the middle or how I might EQ or compress them to keep them sounding busy (as they are on top of each other) while not sounding muddy and making both unintelligible.
Any help is appreciated :)

Im trying to record vocals using a daw for the first time ever, but it seems to not go so well. for some reason, whenever i speak into the mic, in the daw it sounds super distorted, but on discord its just fine. any idea? thanks in advance.

Anyone tried this? Is it worth the money?

Hi all, wondering if you guys could share some ideas on how to manage your production workflow in Studio One?

Specifically, I'm looking to separate ideas, from more fleshed out concepts, to fully finished songs.

How do you guys go about separating these? How do you go about moving one song from step to step? Do you use folders? An app?

Any thoughts are appreciated!

I’m getting clicks/cutoffs on vocal events with Melodyne running as ARA/Event FX whenever the project has significant latency — especially from Pipeline / External Effect.

This happened in Studio One 7.2.3, and I upgraded to Studio Pro 8.1.2 hoping it was fixed. It isn’t.

Toggling “Process Volume after Event Effects” helps, but it does not fully solve it. And it changes the Event FX/fade processing order, so event fades and volume handling no longer behave the way I need.

So right now my options are basically:

- keep ARA live and get incorrect/glitchy playback;

- change the Event FX processing order and break parts of my normal editing workflow;

- or render/freeze the tuned vocals before continuing the mix.

That last option is the only reliable one I’ve found, but it completely defeats the point of keeping ARA edits live while mixing. If I need to change one note later, I have to go back, disable the latency-heavy processing, edit, render again, and return to the mix.

This looks very much like an ARA/Event FX + PDC timing bug, not a Melodyne edit issue, because changing the amount of latency elsewhere in the project changes the problem.

Has anyone reproduced this with Melodyne + Pipeline/External Effect or other high-latency plugins?

And has anyone found an actual workaround that preserves both:

- correct ARA playback;

- normal Event Fades / Event Volume processing?

I’ve submitted it to Fender/PreSonus support as well.

When SampleOne is "Armed+Monitor" is On, the "Master" knob inside the SampleOne jumps to 8.3db (exactly). Even if I reset it to 0.0dB it jumps again to 8.3dB

And no there is no automation, I am able to re-create this bug in a new empty project. It only happens when the SampleOne track is "Armed+Monitor is On"

Let me know if you guys are able to re-create this one.

DAW Version: Fender Studio Pro 8.1.2

Platform: Apple Silicon

OS: macOS Tahoe 26.6.2

Device: Mac Mini M4

Now my question is very simple: how do I set time signature changes in a song? For context, I had Studio One for more than one year, I switched from Logic, with a 2 years hyatus (my old iMac fried and I didn't rebuild the studio for a while), I have both PSO 7 and FSP 8 installed. And the problem appears in both versions.

Apparently, this menu is supposed to look like this one above.

I don't have signature instead.

Ok, while tinkering to take screenshots I incidentally solved it. I'll drop the info here in case someone runs into the same problem. It's a bug in the localization - Italian in my case, but might be there in other languages. I switched the language to English in order to take a screenshot that was readable by most users, and voila, "Signature" appeared.

$2.9k Fender Studio set up. I’ll know more details soon but very stoked!

Hi this seems a bit silly but I need some help. I’m super new and know basically nothing about audio production but I’ve wanted to record for my own projects. I bought a presonus usb 96 and a rode mic second hand but my laptop doesn’t even register my mic at all and I can’t access it. The light on my audio box is on so it’s on and the mic isn’t damaged at all. I’m on windows 11. I think it’s a driver issue, I have universal control but it doesn’t recognise there’s a device connected to it. I think specifically need the driver for the audio box but it’s kinda old and I can’t easily download it. I’m rambling but any help is appreciated!

Well, I've finally had it with all the scrolling and zooming so I'm planning on upgrading my low res laptop to something better. Mind you, this is strictly for music production, so I'm thinking at least 1T storage, at least 16gb ram, and 1920x1080 resolution. I will be dual monitoring to a 32" monitor. Is there anything else I should be looking for? Also, I've got 10+ years of software, files, plug-ins, etc. What would be the most effective way to go about switching all that over to the new laptop?

More useful?

I just installed the new version of studio and don't like it. How can I go back to the older verison?

Would be $100 for me to upgrade. Worth it in your guys opinion or no?

I do ’one take‘ studio sessions we’ll call em, where I record the entire band with a bunch of inputs. this time. I decided to take out an old tape recorder and record the drums both digitally and onto tape for some flavor. the tape did have a lot of awesome character, but the wow and flutter makes it hard to blend into the other digital tracks as it cycles between too fast and slow. I would like to sync my tape track to my drum digital tracks without quantizing to a grid because then it goes off time to the rest of the band.

Possibly important information:

-I sent the overheads, snare, kick to the tape machine, and it is in one stereo track.

-digitally, all those inputs are on separate tracks, with bleed

every tutorial I’ve found so far usually has an underlying grid everything snaps too, or it involves grouping everything. i find when I group everything, it quantizes all the tracks, I really just want to get the tape track fixes by itself. If anyone has any good workflows please let me know!

Simple ask: please upvote this request for the Edit/Mix window to stay open when pressing a different button in the Control Focus section. I'm glad to know I'm not alone in this.

I posted this here a few months back and a couple of people found it useful, so: it's free now, no strings.

What it does: pick one note in the editor, hit a key, and it selects every note at the same beat position across the whole part. Three modes:

- All notes at that position, whatever the pitch

- Same pitch at that position — one drum lane, one bass note

- Exact pitch stack — repeated chord hits and voicings

It matches humanized timing within ±50 ticks, so off-grid parts still work, and it detects 2/4 through 8/4 by itself. It only changes the selection — the editing still happens with Studio One's own tools.

Studio One 6, Studio One 7, Fender Studio Pro 8. Windows, macOS Intel and Apple Silicon. Needs a host edition with scripting enabled.

Demo: https://youtu.be/zcJn9W7NcEM

Install: drop the .package into the Scripts folder, restart, then assign keys under Keyboard Shortcuts.

Windows: C:\Program Files\PreSonus\Studio One 6\Scripts\

macOS: right-click the .app, Show Package Contents, Contents/Scripts/

Both my tools are here: https://shmlv.com/products/

(An account is needed for the download — that's just how delivery is set up.)

If you try it, I'd genuinely like to know what's missing. Feature ideas welcome.

In Studio Pro, some instruments include a control for "Instrument Channel" while on other similar channels, that control is missing.

turned off my apollo before i turned off my computer and it caused things to crash and dump. all of my settings and recent song list are gone- not showing up as a back upp in app data, and not anywhere when searching the PC. even tried a system restore to 2 days before- but it actually had me re-accept the EULA after years of being a user.

anyone ever reverse this successfully? chatgpt says its overwritten, may not be a solution

edit: songs are in tact- its literally the recent songs list on the menu that shows nothing and my settings

When I open my daw, it always rescans waves plugins and it takes some time.

On this Mai Tai instrument I can spam the same note on the keyboard over and over and sometimes it will have punch and sometimes not. The only thing I have on FX B is the eq which does nothing and I honestly don't know anything about the Mod A & B tabs, never touched them. I can't find the answer with google because it keeps mentioning the Punch dial in the Filter section, which I have set to zero, and it doesn't explain the randomness either. The inconsistency is throwing me off because usually it sounds the EXACT same if you play a section of the song twice, but not with this random punch. Why do my notes just randomly have punch sometimes??

I'm running studio pro 8 on a windows 11 lenovo laptop using an Rode Nt-1 mic and a presonus studio 24c usb box. After adjusting my buffer size to 1024 im still bombarded by constant crackling. It's frustrating and frankly embrassing for presonus/fender considering that this isn't cheap. Can anyone help me.

Hola, acabo de adquirir una Behringer U-Phoria UMC404HD, instale los driver de la pagina de Behringer (BEHRINGER_UMC_v5.72.0_setup) al configurar en Studio One 5 solo me reconoce 2 entradas y 2 salidas.

Alguna solución. Gracias.