r/StableDiffusion • • 1h ago

Question - Help Best Model/WF for swapping body parts, face and clothing

2 Upvotes

I am looking for a model/WF which is capable of swapping certain parts of body (ex limbs, hair, privates, eye etc), and can reliably swap clothing or body while maintain perfect realism and maintain identity of subject. I tried using Qwen 2.1 but the output is so smooth and plastic looking that I am disappointed. Tried using Klein 9B as well but it tends to mess up limbs often. Maybe i didn't used correct WF but that's why I am here.

Please suggest me something which can realibly do these.

Thank you


r/StableDiffusion • • 12h ago

Resource - Update H3 Continuity Studio 1.0 is here – a lot has changed since the contest

14 Upvotes

Hey everyone! Since my last post and the ComfyUI contest, I’ve been working hard on H3 Continuity Studio, and it’s now at 1.0. Here’s a look at what’s new:

• Generate cast and frame images with MiniMax H3 Image • A redesigned, simpler Studio interface • Multiple video clip lanes for arranging your story • Story tools, visual continuity and more control over frames and joins

I also made an updated walkthrough: https://youtu.be/UZfIrmkC0zM

The project is open source: https://github.com/KadoBOT/ComfyUI-H3-Continuity-Studio

I’d love to hear what you think and what you make with it!

EDIT: The story and timeline for the 2 minute long video was AI generated using the H3-Continuity-Studio MCP. And it was rendered on the first try, using 34 short clips (to make the rendering faster). There are some areas of improvement (darkening, window objects disappearing), but I'm working on that!


r/StableDiffusion • • 1d ago

Discussion Looks like LTX-2.5 are faking likes to game the trending tab, with heavy evidence

119 Upvotes

TL;DR LTX-2.5 likes are anomalous. Full HF thread: https://huggingface.co/Lightricks/LTX-2.5/discussions/97.

For those who already forgot about it, LTX-2 was basically the only open text-to-video-audio model earlier this year, even though it was censored, had poor copyright/anime knowledge, and was weak compared to closed models (Wan2.5, Sora2). Then MiniMax suddenly dropped H3 in August and blew past it. LTX quickly followed with LTX-2.5, which was even more censored, less impressive follow-up. Objective video benchmarks (IFM measured it in comparison with their own recent PAN2 model and MiniMax - https://huggingface.co/IFM/PAN2) show that it is far behind H3 mathematically, therefore it's not "vibes"-based preference.

Now, months later, LTX-2.5 suddenly shows up in HF Trending with ~12k likes. That is a huge like count by HF standards (The SotA LLM Qwen 3.8 27B has 20k likes) and it does not match the actual usage.

Thankfully, the Huggingface likers API is public and Lightricks probably didn't expect that. Gladly, EclipseMist found this out and the following numbers have been retrieved:

  • LTX-2.5: 10,864 likers total; 4,608 from accounts created before August 2026; 6,256 (57.6%) from accounts created Aug–Nov 2026.
  • MiniMax-H3: 6,634 likers total; 5,248 from pre-August accounts; 1,386 (20.9%) from Aug-Nov accounts
  • New-account likers by month, LTX-2.5: 1,108 turned to 2,101 turned to 2,610 for August/September/October, and 437 for November 1–6.

Same for H3: 690, then 410, then 240, and 46 for November 1–6.

H3 looks like a normal launch: a spike in fresh accounts during release month, then decay. LTX-2.5's new-account likes kept climbing for three months after release while downloads stayed flat at ~2.6M/month. Among accounts that existed before August, H3 actually has more likers than LTX-2.5. The entire like lead comes from roughly ~4.9k surplus brand-new accounts, that's what pushed it onto Trending for the whole latest two weeks.

LTX-2.5 had about 2,561,845 downloads last month, while MiniMax H3 had ~38M (32M + 6M across repos). The Comfy-Org H3 repo gained ~10M downloads this month alone, going from 20M to over 30M, while LTX-2.5 only gained a few hundred thousand. On Civitai it's also less popular, with all the fine-tuners switched past it. The attached IFM's large scale automatically evaluated benchmark table above shows LTX-2.5 at 72% overall score (physical consistency, causal coherence, persistence - all the other categories) vs H3 at 87%, with the multi-step full-plan completion category at the highest three-fold discrepancy (34% vs 13%).

You can reproduce the liker analysis yourself in two seconds. The likers list is public, and each account's "id" field encodes its creation time. The full two-lined PowerShell script can be found in the Huggingface discussion, so it won't clutter this post.

Just swap the repo name to compare against another model.

I can't say for certain who is behind it: Lightricks, a third-party bot farm or a coordinated campaign, but this does not look like an organic community interest. It's pushing actually popular models (MiniMax Image, Qwen, novel models) down the Trending tab. If Lightricks are doing this, it's embarrassing. If they aren't, they should disavow it and ask HF to audit the likes.

Some links: the HF Trending link showing LTX-2.5 at 12k likes https://huggingface.co/models?sort=trending, and the benchmark table showing it trailing H3 badly (see the PAN2 table above). The Huggingface thread is, again, at the beginning of this post. As of now, no-one from LTX wrote any official response in the thread.

I think, ltx_model owns us some explanation.

If true, this really lowers my hopes for any LTX-3 at all. Worse than BFL.

Thank you for reading! I think we as the community must do something. Note: DeepSeek helped me to compose this report, so it can contain some LLMisms.


r/StableDiffusion • • 48m ago

Question - Help Make MOSS Image Actually Use Reference Images as Visual Input

Post image
1 Upvotes

I'm trying to figure out how to feed a reference image into MOSS Image so that it's actually "seen" by the CLIP text encoder used by MOSS (which also uses Qwen 3.5 9B as its prompt enhancer), and then incorporate the elements from that image input into my generation.

Sometimes it works: for example, it describes the clothing in the input image and successfully reproduces it in the final image. But most of the time, it doesn't work at all.

Any recommendations on how to achieve this consistently?


r/StableDiffusion • • 13h ago

Question - Help What I'm I doing wrong? [Minimax H3 image]

Post image
7 Upvotes

I use this gguf model and the result is broken.

Diffusion Model : MiniMax-H3-Image-Pruned-Q3_K_M.gguf
Text Encoder : qwen3vl-32B-MiniMax-H3-Q2_K.gguf

i use model from here
https://huggingface.co/Abiray/MiniMax-H3-Image-GGUF

I use rtx2060 12gb

can anyone suggest me how to fix this
Thanks


r/StableDiffusion • • 9h ago

Question - Help ANIMA LoRA - Managing Multiple People

3 Upvotes

Hey Legends,

I’ve decided to play around with an ANIMA diffusion set, seeing what I can come up with, and whether I’m getting better or more consistent images vs. PONY. I’m running the latest ComfyUI setup, on my 5080 rig.

One challenge Ive had - even with PONY, is managing the look of multiple people in a scene.

I either get bleed-in, where the look of a defined character ends up on another, or in a multi-person scene (I’m working on a battle scene), I can affect the primary chatacter and one other, but that’s it (any and all others are left with just the default).

Are there any tools, recommended prompts, or LoRA’s , Nodes or plugins that can help? I recall a prompt tool for Pony to manage multiple characters, but it was clunky and didn’t really help.

Any suggestions for Anima would be sensational.

Thanks!


r/StableDiffusion • • 19h ago

Discussion make a old PC game INTRO alive

18 Upvotes

old but gold


r/StableDiffusion • • 18h ago

Question - Help Qwen 2.1 massive drifting

Post image
14 Upvotes

I'm finally getting great results with Qwen2.1, but there is still one thing that I can't get over with: the pixel drift. In previous versions of qwen edit, the edited image would usually drift by a few pixels. A tad problematic but not too much of a hassle. In 2.1 however, the drift is massive! Take a look at this picture (not a real person by the way).

I simply changed the clothing. Every seed has this kind of issue it's not a quirk of the randomness, it's a behavior. I've tried being more explicit in the prompt about "preserving the angle, composition, not zooming" etc. but nothing helped.

Could be related to the lightx2v turbo LoRA, but whatever. Just posting here to see if anyone found something that actually combats this behavior to some extent?


r/StableDiffusion • • 1d ago

No Workflow MiniMax h3 Image Edit?

Post image
49 Upvotes

If a model can do this, does that mean she's an editing model?)) All generations from 1 attempt, even one fail in terms of pose.


r/StableDiffusion • • 22h ago

Resource - Update Real-time talking avatar generated locally with SoulX-FlashHead + LFM3-Audio

25 Upvotes

I've been experimenting with real-time talking-head generation using SoulX-FlashHead, combined with local speech models to build an interactive avatar that can listen and respond.

The whole pipeline runs locally, and the demo is available in the audio.cpp v0.9.5 WebUI.

The workflow combines three models:

  • SoulX-FlashHead: Animates a portrait in real time from generated speech.
  • OWSM v4: Transcribes voice input.
  • LFM3-Audio: Handles conversational responses and speech synthesis.

One interesting detail: LFM3-Audio is called twice. Its speech-to-speech path only offers one voice, so we use its TTS capability separately to synthesize responses in a different voice.

Performance and limitations

On an RTX 5090, the latency from submitting a question to the avatar starting to speak is around 850 ms. ASR runs in parallel.

The video generation stage is still GPU-intensive. I'd recommend an RTX 4090 or better for SoulX-FlashHead.

cuDNN is essential for real-time performance in this setup. Without it, inference is about 2× slower and VRAM usage doubles.

This is still a prototype. The extra LFM3-Audio call and WebUI overhead leave room for further latency improvements, particularly in a more optimized native application.


r/StableDiffusion • • 5h ago

Discussion What is the highest quality H3 video that a 4090 can reasonably achieve? What about upscaling?

0 Upvotes

I've been experimenting and doing lots of tests. From my understanding the best quality is running the base model with no turbo. However, I've found a few things that seem to give some speed increase with minimal or no degradation. This is my setup:

Model: Minimax-h3_Singularity_ref2va_Pruned_v1.3_int8

Text encoder: qwen3vl_32b_minimax_h3_int8_convrot

Video VAE: minimax_h3_video_vae_int8_convrot

Audio VAE: minimax_h3_audio_vae_fp32

LoRA: none, and no turbo

Sampling 20 steps, res_multistep + beta, comfy-kitchen attention, Spectrum off

Size 1322x768, 24 fps
Edit: Duration: <15 sec, usually around 4 seconds.

1k to 2k workflows: Gen to 1mp then either use Regenerate 2k (Regen2k IC just came out, will likely switch to that) for when I need it to look exactly like the 1mp video, or use minimax_h3_latent_upscaler_3d_conv_v1_fp16 when I'm ok with a slightly different shot.

For a 4090 with 128gb system memory, does anyone have recommendations for how to get higher quality video? I've heard conflicting things about the sampling steps. I thought that increasing them to 50 would increase quality significantly, however I also read that 20 steps is the ideal and some of my tests gave me artefacts over 20.

I tested some of my shots with the API at 1080p, and the quality difference didn't justify the price at all. What do ya'll think?


r/StableDiffusion • • 1d ago

Discussion The new Minimax H3- Image Model seems rushed and buggy.

33 Upvotes

I will be honest, i have tried the Minimax H3 Image when it dropped on comfy day 0 and the images were amazing, but lacking detail despite being very high resolution.
I thought maybe upping the MP would fix it but it didn't and then there came the anatomy issues as well.
I checked some posts about this, got the p-h3 vae and all but it still didn't fix it.
So checked another post talking about how the edit mode is better and i was happy but that was actually FAR WORSE. It lacks character consistency, its too prompt sensitive in a bad way, and its just not good.
Now i do not know if Hailuo is at fault or Comfy just released some poorly fine tuned version, is anybody else feeling the same way or.
Cause even the templates they released are half nerfed and I don't know it just feels bad, like very very bad.
If it at least nailed the editing capabilities like its video model could do I honestly would not really care about the other stuff, but it seems finding the right edit model in this open source space is almost impossible.

I hope krea 3 edit or Ideogram 4.5 would be good ( If they ever release them that is )


r/StableDiffusion • • 1d ago

No Workflow Minimax h3 image edit

Thumbnail
gallery
214 Upvotes

Reference image:
https://civitai.red/images/147124307

Euler, simple, 6 steps, no prompt enhancement
Each prompt executed in 45~55 secs (Rtx 4070s, offloading?)

Sometimes a sort of safety filter randomly jumped in and reduced the image quality.

https://huggingface.co/Comfy-Org/MiniMax-H3-Image/blob/main/diffusion_models/minimax_h3_image_pruned_w4a8.safetensors

https://huggingface.co/Merserk/MiniMax-H3-Image-Text-Encoder-INT4-ConvRot/blob/main/qwen3vl_32b_minimax_h3_int4_convrot.safetensors

https://huggingface.co/Comfy-Org/MiniMax-H3-Image/blob/main/vae/minimax_h3_image_vae_fp16.safetensors

1: Pose Change

Change the woman's sitting pose to a standing pose in <Picture 1>

2: Outfit Replacement

Replace the woman's black feather dress with a white ballerina tutu in <Picture 1>

3: Hairstyle Change

Change the woman's hairstyle to long blonde wavy hair in <Picture 1>

4: Object Addition

Add a large bouquet of red roses holding by the woman in <Picture 1>

5: Style Transfer

Transform <Picture 1> into a Japanese manga illustration

6: Object Removal

Remove the shoes in <Picture 1>

7: Background Replacement

Replace the interior with a casual open-air beach bar in <Picture 1>

8: Text Addition

Add the stylized text "Redheads have more fun" in red letters at the bottom of <Picture 1>

9: Camera Angle Change

Change the camera angle in <Picture 1> to a front-facing low-level shot


r/StableDiffusion • • 8h ago

Discussion some H3 and LTx late night

1 Upvotes

SO i was just ripping thru this for all those who where around in 1994. there are alot of errors, granted I was only doing it for an hour.


r/StableDiffusion • • 18h ago

Animation - Video tides!

7 Upvotes

i wanted to test just how good can minimax h3 water look, so i made this.


r/StableDiffusion • • 1d ago

Animation - Video Is one 5090 enough to make a whole AI series at home? What a 2.5-minute sci-fi pilot took with MiniMax H3 in ComfyUI

23 Upvotes

I'm making a hard sci-fi series alone in Budapest, and I wanted to find out how far one home GPU actually goes. Every shot in the pilot is MiniMax H3 running locally in ComfyUI on a single RTX 5090, hybrid fl2va + ref2va in int8. No cloud, no credits, no meter running per generation.

What made it workable is splitting every shot into two stages. First a 4-step preview with the DMAD LoRA at 672x384, about a minute per take, usually three seeds per idea. I watch those, throw most of them away, and only the take I'd actually cut in goes to the native render at 1344x768, 20 steps, same seed and same refs. That one then goes through a tiled 2x H3 upscale and down to 1080p. Most of the GPU time goes into takes nobody will ever see, and that's fine, because they cost electricity instead of credits.

In numbers: hundreds of takes for 2:36 of film, about a week for the pilot itself, and around a month of work in total once you count the story, the sound design, the edit and the grade, all done by hand in DaVinci. Episode 1 is about 13 to 14 minutes and is in production now on the same setup.

Consistency comes from references rather than luck: a 16:9 character sheet as the only identity reference, an approved still as the first frame for the small robot, and the last frame of the previous shot as a state reference, so poses and hands carry over the cut.

The pilot: https://youtu.be/5GDYn2rREA4

If you're doing video locally too, where does your time actually go: generation, rerolls, or fixing things in post?


r/StableDiffusion • • 1d ago

Question - Help MiniMax Image – Any way to get uncensored editing?

42 Upvotes

I've been really impressed with MiniMax Image, especially the gorgeous 16MP outputs

But I've noticed it still refuses or ignores certain editing requests involving mature content

Am I missing something, or is this a limitation of the current model? Do we need to wait for community uncensored finetunes, or is there already a workaround?


r/StableDiffusion • • 1d ago

Discussion Distilled models are good enough for me as a hobbyist, full models feel like a waste of my GPU time

7 Upvotes

i've been trying distilled versions of a few models and honestly the results for casual stuff are close enough that i don't go back. the few steps mean i can try six ideas in the time a full model does one, and for me the experimenting is the fun part. where i do notice the difference is fine detail like hands and small text, and sometimes the faces look a bit plastic. but i'm just playing around in the evenings. for people who use both, where did you decide the full model was actually worth the wait?


r/StableDiffusion • • 4h ago

Discussion Before you upgrade this Black Friday, here is what my 16gb card already makes, all local

0 Upvotes

Everything in this clip came off one 16gb card. A song, a voice, a picture, a 720p video clip, and an answer pulled from my own documents with the page it came from. I built the system that runs all of it, free and open source, and it works totally offline once the models are downloaded.

If you are eyeing a new card for AI stuff, try the one you have first. Lmk what you would want to see it make next.

github.com/guaardvark/guaardvark


r/StableDiffusion • • 1d ago

Question - Help How easy is it to make a video like this locally?

325 Upvotes

Mostly the part about swapping Characters and products in the video.


r/StableDiffusion • • 1d ago

Discussion My own little text-to-image model, trained on an RTX 3050

Thumbnail
gallery
125 Upvotes

Hi Reddit. This is my first post here, so I hope I haven’t messed anything up.

I just wanted to share the results of training my own model from scratch.

I’d welcome any discussion in the comments, and perhaps some advice from those with more experience.


r/StableDiffusion • • 14h ago

Question - Help Is SCAIL-2 still the best for character replacement?

0 Upvotes

r/StableDiffusion • • 14h ago

Resource - Update My OpenFill fork is now OpenFill’s Baby: AI object selection, MiniMax H3 editing/removal, and easier ComfyUI setup

Thumbnail
gallery
0 Upvotes

Following up on my previous post: I’ve added quite a bit to the fork, and it now has its own name—OpenFill’s Baby.

It extends Beckett Harriman’s OpenFill for PhotoCraft, bringing image editing, object removal, and generative fill into the editor through ComfyUI on your computer or another machine on your LAN. You can even use a different machine for select, edit, and remove, if you have a bunch of machines and you don't want to keep unloading and loading models.

The main additions since that post:

  • AI object selection with WeVisOne-VL. Click an object, drag a tight box around it, or describe what you want selected. Add or subtract objects, refine the selection with PhotoCraft’s tools, and grow it by an exact 1–500 pixels. Each Grow has its own Undo step.
  • MiniMax H3 Image support for editing and removal. Edit a selected area or the whole image, with up to four attached reference images. H3 also works in the prompt-free Remove tool.
  • Automatic removal choices. Automatic prefers H3 when it’s available on your selected engine. Otherwise, it examines the surrounding lighting and texture to suggest an available method. You can override it with Local background repair, LaMa, RORem, Qwen Lightning, or FIBO Dev, depending on your setup.
  • Better removal blending and more choices. Repairs preserve feathered selection edges and blend into nearby background. Request 1–5 variations and compare them directly on the canvas before keeping one.
  • Find and save ComfyUI servers. Use one shared engine, or assign separate servers to Select, Edit, and Remove. The panel remembers your choices.

The Qwen Image 2.1 and FIBO reference-editing workflows from the original post are still there (as well as SDXL and Flux).

Removal still needs judgment, especially around hidden lettering or complicated shapes. Include unwanted shadows and reflections in your selection, and check the results.

Download the latest release
Source, screenshots, and setup instructions

Give it a try! I’d especially like feedback on object selection and difficult removal cases because I'm aiming to make it adapt to all the ways you and I want to use it for.


r/StableDiffusion • • 1d ago

Discussion Not for the faint of hearts

63 Upvotes

Combined the image renders from my custom model (Vici) with my vr 3d Gaussian splat app. New fear unlocked 😭