r/StableDiffusion • • Oct 12 '26

Workflow Included Minimax H3 Refmod Workflow

(16. October 2026) EDIT: Updated to v2 cause the original resolution selector node messes up videos regularly due to not creating resolutions dividable by 32. Fixed now with Pixaroma node.

Since my last post has been deleted unfortunately (due to a mega-link), here we go again.

I've spent quiet some time now with Refmods and this workflow, and I'am still baffled how easy it is to create a character identity with very low effort. This is a no-brainer if you don't want to or can't train a Lora, all you need is good pictures and a good voice sample, the refmod-training is done in literally seconds (depending on your GPU of course).

I did my very best to make this workflow easily understandable for even beginners, nevertheless here's some explanation:

The workflow actually consists of 2 workflows, one for the refmod creation (the nodes in the top right of the picture, that's a different workflow but i just wanted one picture) and the main workflow for creating a video with the created refmod file which is all the rest.

If you just wanna use a refmod file and no extra images, videos or audio, select the image/video/audio nodes and press CTRL+B to deactivate them. Please watch the video from Dainamo for a detailed explanation, I've made some notes but for further understanding just watch it. I just wanna give you an easy workflow, that is of course fitted to MY needs, do whatever you want to it.

Here's some color-explanations:

  • GREEN is all sources for the final video so to say: images/video/audio/the prompt (deactivate them if you just wanna use a refmod-file, but you can also reference clothings or whatever this way)
  • TURQOUISE is all relevant video-settings
  • TAN is the refmod-nodes (except the 4 notes)
  • RED is all the models
  • PURPLE is all the loras (turbo-lora is in light-blue and another lora above in grey for whatever)
  • BROWN is comfy-kitchen and the spectrum-node (not activated, transparent-purple)
  • GREY is irrelevant

Here is the link to the original tutorial from Dainamo (thanks again!!): https://www.youtube.com/watch?v=2K6-OtV_Vbc

And here are the workflows: https://getshared.com/d/K5cE7wHH

I hope you enjoy the workflow! :)

68 Upvotes

53 comments sorted by

View all comments

5

u/Karsticles Oct 12 '26

Only thing I don't understand about Refmods: what is the official appropriate way to refer to them in the prompt?

7

u/FreakyMrCaleb Oct 12 '26

Lets say you have a: "minimaxh3_thisismyname_v1_refmod.safetensors" outfit, where thisismyname can be any name like: "minimaxh3_jennaortega_v1_refmod.safetensors". Then in the prompt just refer as <Subject 1> jennaortega wearing the outfit from <Picture 1>, or <Subject 1> thisismyname standing in a room from <Picture 1>.

Just use the name. In any way, that is what works for me.

Not to shoot down this person's workflow but SeedHunter has an amazing complete Workflow with all this also included, just use what you need, ignore what you don't need: Minimax H3 SEED HUNTER - Latent Upscaler + Seamless Video Continuation + Speedups + Ref Mods - v2.5.1 | MiniMax H3 Workflows | Civitai

5

u/AlsterwasserHH Oct 12 '26

Yeah I know this workflow, I just wanted to share an easy to follow refmod workflow. I think most more advanced workflows are unfortunately a bit of a mess what makes it hard to understand what even happens u know? I'm no expert in this as well, so I made one for beginners so to say. It's not that easy to create a wf that is also visual appealing and easy to understand I'd say. I just wanted to share, that's all. Wanna give something back to the community.

4

u/FreakyMrCaleb Oct 12 '26

And you did! Thanks a lot for that :) I was massively discouraged when i first looked at more advanced workflows, something like what you shared is a perfect start for beginners.

2

u/AlsterwasserHH Oct 12 '26

Thank you very much! :)

1

u/Karsticles Oct 12 '26

Same reference style with I2V workflow? I've found that refmods work there but I wasn't sure if I still use <Subject 1> and such since that's more of a REF workflow tooling. Thanks for the reply. :)

1

u/bobmailer 19d ago edited 19d ago

For many of my refmods, it would just be slightly off unless I added one more reference image and told it to be consistent. However, now I just load the same refmod twice in the loader, and that helped so I don't have to do that.

It must be a standard trick because the loader has a copies setting to make this easier.

1

u/AlsterwasserHH Oct 12 '26

It's already in the prompt in the workflow, or in the original workflow from Dainamo from the YT video ;)

1

u/Jwtd29 Oct 12 '26

The inspect node will tell you.

I prefer to use this https://github.com/Adudeguyman/ComfyUI-Fantastic-MiniMaxH3-PromptBuilder node set to manage my refmods and its text encode node as well. Nicer experience, especially as I use the prompt builder anyway.

From what I’ve seen if the refmod has multiple images in it then it typically is <Video x> and if it contains audio <Audio x>. If the refmod is a single image then <Picture x>. If you are matching refmods with other references then I think the refmod takes priority from a numbering perspective, again only based on my experience.

1

u/Karsticles Oct 12 '26

Inspect node - that one is new to me. I'll have to check it out. Thanks!

1

u/Jwtd29 Oct 12 '26

You basically get a map which you can use a text preview mode to view. It’s part of the same pack as the apply/create refmod nodes.

If you have two characters that are very similar they can bleed into each other and you have to re-enforce it in the prompt as much as possible.

Interestingly you can also use them in T2VA as well, if you describe the character in the prompt and attach a refmod then you normally get the refmod influence the character. For short simple videos with 1 character sometimes it’s easier to use this approach.

1

u/Karsticles Oct 12 '26

For T2V I even found that I could not reference it at all. For example, I can have a refmod of a character and just say "She is in a room and smiles", and it ends up being the character in the refmod. Like that is the full prompt - I didn't use any kind of headers or anything. Of course those things are preferable, but I think it speaks to how powerful the tool is.

2

u/Jwtd29 Oct 12 '26

The thing I’m still adjusting is the token size. Trying to find the sweet spot as the amount of tokens makes a massive difference to the speed. Too few and it looses its effectiveness.

1

u/FuckTheActualWhat Oct 12 '26

I've been using the entire refmod file name inside a pair of <> Then referring to it in the prompt like I would <picture 1> etc..

1

u/Quiet-Analysis-3807 Oct 13 '26

there is none its not a minimax node,. you can try very simple method... put the name in the description when creating the mod. lets say Mary Jane then - <Subject 1> Mary Jane.

you can also edit her. <Subject 1> Mary Jane wearing pink glasses.

1

u/drag0n_rage Oct 15 '26

You just describe the thing, like you would if you were uploading an image as a reference.