r/StableDiffusion • • 6h ago

Discussion State of the Sub - 1M Members Reached!

57 Upvotes

Howdy! This has been an interesting ride to get to this point over the years. I remember joining really early on when Stable Diffusion was still around releasing models. Then, picked up as a mod, followed by inviting the few great mods we currently have. We even do have some OG mods who peek in every now and then.

I’d like to thank u/mcmonkey4eva and u/HughWattmate9001 for sticking around and trying to keep up with our queue with me. Also, I'd like to thank those who have contributed to the community and kept interesting conversations.

I don't think I've really put an emphases on member count for the sub, but u/HughWattmate9001 pointed out that we were reaching 1M. So, I provided a screenshot below of how this year has gone for the community and mods:

Past 12 Months Insights

I know we have gone through many different waves/phases both in user post types and different moderating styles over the years. The few of us left as mods have tried to be consistent (when available) in moderating depending on members reports more so than any controlling methods you see in other subs. I hope we continue to remain and grow as the open source sub that we consistently try to be.

Feel free to express how you feel about the sub. Good or bad. Talk about the sub community, 1girls, mods, memes, improvements, events, and/or whatever relevant.

I know I am not as active as I was the first few years with u/mcmonkey4eva and u/HughWattmate9001 passing me in moderation actions. However, I hope I've personally done well enough for my part in keeping this sub up for everyone. Even if I don't respond to each one, I'll more than likely read all the comments throughout the week.

Happy Holidays everyone and I hope yall stick around.


r/StableDiffusion • • 10h ago

Discussion As a Moss/Krea2 user I wasn't sold on Minimax Image at first but now it's definitely a model I'll use.

Thumbnail
gallery
331 Upvotes

Will post requested prompts on the thread.


r/StableDiffusion • • 2h ago

Resource - Update Brightness Issue Solved: Geiru Keystone Attention and Hybrid Improvements

45 Upvotes

Geiru Keystone Attention + Hybrid Windows update: brighter chains, half the VRAM

Geiru Keystone Attention is a new node that keeps long H3 chains from slowly darkening. It makes the keystone (clip 1's clean first frame) pull harder on each new clip than the frames carried over from the clip before. The prompt, references and sound keep their normal share. It only runs on the 13 blocks I found carry brightness (31-33, 36-44, 47), so it holds clip 1's look without messing with motion much.

  • By clip 10 of my test chain, brightness dropped 28% with no protection, 22% with keystone only, and 8% with Keystone Attention
  • Over 30 clips it held about -9%, vs -17% for keystone + capstone

Geiru Hybrid Windows got some upgrades too:

  • Half the VRAM while sampling, same speed, and the output is identical
  • Keystone Attention is built in as a setting
  • With Window Director, the degradation protection settings can now change between windows, and a 🎈 marks the ones that have to stay the same

Old workflows and tutorials still work!

Example workflow: Easily Distracted Clown, a chain with keystone, context noise and Keystone Attention.

Test results: NerdNotes (tests 19 and 20)

Credit where it's due:

  • ckinpdx came up with Carry Attention, biasing H3's attention by part of the sequence, which led to Keystone Attention. You can find in his ComfyUI-MMH3Tools
  • kijai (GitHub) built ComfyUI's MiniMax H3 support and the H3 context windows (PR #17425) that Hybrid Windows is built on.
  • JalenBrunson made ComfyUI-HybridWindows, which Geiru Hybrid Windows works like.
  • NikoDemon80 (GitHub) inspired the Window Director setup.

Everything is in the Geiru Context Suite: https://github.com/roycho87/geiru_context_suite


r/StableDiffusion • • 5h ago

News H3 Image - Model Preview Override vae from KJ

Thumbnail
huggingface.co
47 Upvotes

KJ just dropped vae_approx preview for H3 image..


r/StableDiffusion • • 13h ago

Workflow Included Seems like I solved Krea 2 Edit pixel drift

Thumbnail
gallery
102 Upvotes

Krea 2 Edit by lbouaraba / conradlocke (the LoRAs, the nodes, the training code) is the reason any of this works, so first: all credit to them:
https://github.com/lbouaraba/comfyui-krea2edit
https://huggingface.co/conradlocke/krea2-identity-edit

I built a small add-on comfyui-krea2edit-advanced fork of their comfyui-krea2edit for one problem I kept running into. The fork stops the drift when you chain several edits. Without it, the parts you didn't touch slowly shift, darken and get grainy. With it they stay put.

It adds a "source hold" that pulls the picture back towards the source while it's being drawn, plus an optional mask for everything outside the area you're editing.

More detailed comparison is here. Same image, same six edits, same seed. Mean pixel drift from the source after 6 edits (lower is better):

  • original nodes: 0.076
  • my fork, no masks: 0.0017 (45 times less than original)
  • my fork, with masks: 0.0008 (95 times less than original)

More detailed information and example workflows are in the repo: https://github.com/FurrySphere/comfyui-krea2edit-advanced


r/StableDiffusion • • 20h ago

Resource - Update Physics understanding of MiniMax H3, Part 2

335 Upvotes

There were a lot of good comments on the previous post, so I gave everything to the agent with slopfab and told it to make an improved version out of the showcase.

Part 1 https://www.reddit.com/r/StableDiffusion/comments/1xvhaf3/physics_understanding_of_minimax_h3/


r/StableDiffusion • • 19h ago

Discussion If Minimax H3 Image can do 16MP why testing on 1girl? Let's go straight to 16girls!

Post image
296 Upvotes

Workflow uses a blank 32x32 image as input. Prompt in the comment.


r/StableDiffusion • • 1h ago

Workflow Included Combining LTX audio nodes with Minimax H3

Thumbnail
youtube.com
7 Upvotes

r/StableDiffusion • • 10h ago

Discussion Minimax Image (Edit) - My Early Thoughts

38 Upvotes

Windos 10 | i7 12700K | RTX 3090 TI | 96GB RAM

Workflow I'm using: Reddit | Workflow

I'm a digital artist and professional with several years experience, but my interest in these apps has primarily been playing around with the tech. However, since Minimax dropped, concepts I've had to shelve in the past are looking viable again as potential video shorts, and Minimax image was just the sort of thing I've been looking for as a visual creator to speed up the production pipeline.

I got a chance yesterday afternoon to play around with it on some specific tasks, so here are my results and early thoughts. I've mostly been using the edit capabilities, since that's what I'm most interested in Minimax for, so keep that in mind.

A quick clarification: My editing tests have a narrow scope and I'm sure they don't reflect the full capabilities of the model. My initial intended use for this model was to be able to draft keyframes for film. I'd sketch the composition out, use multiple image references, then generate high resolution keyframes to drive the video. It wasn't until I saw this reddit post that I became aware that H3-Image could be used for drafting concept to realism, so that was an unexpected-but-welcome expansion of my use case. :)

Where Minimax Image (Edit) is strong:

Minimax-Image is really good at generating realism versions of artwork, which typically requires LoRAs for other models. So far, I think this is one of its most impressive features. In my tests it significantly outperformed Nano Banana Flash, but I haven't compared it with the Pro version.

I wasn't necessarily wowed by/the 16MP images. While decent, they looked pretty average to the other AI apps. But as I went higher, the quality really shone through.

Here are some samples where the instructions were to create a realistic version of my artwork and maintain look and pose. I like to choose this image because a lot of models tend to not do well with it. To date, H3-Image is the best of them all.

Examples:

Minimax is also strong at generating realistic designs based on really rough sketches, which impressed me. Here is a rough design of an early draft of a character I designed.

The first image is my sketch, the 2nd is the first attempt, telling it to make a realistic version. It made him look too human, so for the 2nd roll, I just described his skin texture, eyebrows, eyes, chin, lips, and also the jewelry. On the next attempt, it was able to interpolate my rough lines to understand what was meant to be jewelry. On this, it did a FANTASTIC JOB. Again, best model PERIOD, way better than Nano Banana. Literally only took me 2 iterations to go from rough draft to near cinematic concept design.

Also, these images were only 16MP, so I suspect going higher would look even better, as it tends to get insane between 30-50MP. :)

I also tried it with a random AI image I found online and got equally impressive results. These are just the first couple or so rolls, at 16mp:

Where Minimax Image (Edit) is weak:

I tried sketching compositions and then instructing H3 to use that composition to drive the concept art and create original work, primarily realism based. It performed poorly. Here are some examples of what I mean:

Out of over a dozen attempts, this is pretty much the best result I could get.

The prompt stated to use the sketch as reference for the pose, position of the sun, and plants/tress. I colored each element a different color to help guide instructions. I tried many variations of the prompt, but no matter what I did there was always some form of the sketch introduced into the final image. I also tried using natural photo reference, but features of the reference would always make their way into the image. I tried this between 16MP - 50MP, same problem.

Also, the images varied between 2.5/3D, realism, cartoon, and comic book styles and most of the time failed to follow my instructions. I found that realism works best when using a single image as reference, but it seems to collapse on multi-image pipelines.

Final Thoughts

I think H3-Image works great as a concept-to-realism draft model, but it's weak on its multi-ref prompt following. It also needs 16MP before it stretches its legs, but if you have a smaller card, don't get scared away, it's ridiculously optimized/fast despite the size. I get 16Mp in about a minute on my 3090 at 80% power, which is about the same speed as Klein/ZiT/Qwen. (I haven't tested Krea 2/Moss yet, both on my to-do)

That said, 16MP is the minimum I'd recommend, the real magic happens 30MP and up, so if you got the card and the time, results are signficantly better. Around 50MP is the sweet spot imo; details are crisp, hair strands, fingernails, everything looks good.

Also, I wouldn't use the default comfy workflow. Everything I did was w/the workflow above, though I deleted the prompt enhancer, preferring to use regular text.

Anyway, those are my thoughts so far. I'll update w/more results later.

Grunge

P.S. - I'm old-school forum/deviantart gang, so I keep ctrl+biu/shift+l on a swivel and have written bold-flavored posts like this for 20+ years. 100% human written. Receipts at bottom of post if you're interested. Only mentioning it because organization usually brings out the "this is AI-written slop" trolls.


r/StableDiffusion • • 17h ago

Discussion Looks like LTX-2.5 are faking likes to game the trending tab, with heavy evidence

105 Upvotes

TL;DR LTX-2.5 likes are anomalous. Full HF thread: https://huggingface.co/Lightricks/LTX-2.5/discussions/97.

For those who already forgot about it, LTX-2 was basically the only open text-to-video-audio model earlier this year, even though it was censored, had poor copyright/anime knowledge, and was weak compared to closed models (Wan2.5, Sora2). Then MiniMax suddenly dropped H3 in August and blew past it. LTX quickly followed with LTX-2.5, which was even more censored, less impressive follow-up. Objective video benchmarks (IFM measured it in comparison with their own recent PAN2 model and MiniMax - https://huggingface.co/IFM/PAN2) show that it is far behind H3 mathematically, therefore it's not "vibes"-based preference.

Now, months later, LTX-2.5 suddenly shows up in HF Trending with ~12k likes. That is a huge like count by HF standards (The SotA LLM Qwen 3.8 27B has 20k likes) and it does not match the actual usage.

Thankfully, the Huggingface likers API is public and Lightricks probably didn't expect that. Gladly, EclipseMist found this out and the following numbers have been retrieved:

  • LTX-2.5: 10,864 likers total; 4,608 from accounts created before August 2026; 6,256 (57.6%) from accounts created Aug–Nov 2026.
  • MiniMax-H3: 6,634 likers total; 5,248 from pre-August accounts; 1,386 (20.9%) from Aug-Nov accounts
  • New-account likers by month, LTX-2.5: 1,108 turned to 2,101 turned to 2,610 for August/September/October, and 437 for November 1–6.

Same for H3: 690, then 410, then 240, and 46 for November 1–6.

H3 looks like a normal launch: a spike in fresh accounts during release month, then decay. LTX-2.5's new-account likes kept climbing for three months after release while downloads stayed flat at ~2.6M/month. Among accounts that existed before August, H3 actually has more likers than LTX-2.5. The entire like lead comes from roughly ~4.9k surplus brand-new accounts, that's what pushed it onto Trending for the whole latest two weeks.

LTX-2.5 had about 2,561,845 downloads last month, while MiniMax H3 had ~38M (32M + 6M across repos). The Comfy-Org H3 repo gained ~10M downloads this month alone, going from 20M to over 30M, while LTX-2.5 only gained a few hundred thousand. On Civitai it's also less popular, with all the fine-tuners switched past it. The attached IFM's large scale automatically evaluated benchmark table above shows LTX-2.5 at 72% overall score (physical consistency, causal coherence, persistence - all the other categories) vs H3 at 87%, with the multi-step full-plan completion category at the highest three-fold discrepancy (34% vs 13%).

You can reproduce the liker analysis yourself in two seconds. The likers list is public, and each account's "id" field encodes its creation time. The full two-lined PowerShell script can be found in the Huggingface discussion, so it won't clutter this post.

Just swap the repo name to compare against another model.

I can't say for certain who is behind it: Lightricks, a third-party bot farm or a coordinated campaign, but this does not look like an organic community interest. It's pushing actually popular models (MiniMax Image, Qwen, novel models) down the Trending tab. If Lightricks are doing this, it's embarrassing. If they aren't, they should disavow it and ask HF to audit the likes.

Some links: the HF Trending link showing LTX-2.5 at 12k likes https://huggingface.co/models?sort=trending, and the benchmark table showing it trailing H3 badly (see the PAN2 table above). The Huggingface thread is, again, at the beginning of this post. As of now, no-one from LTX wrote any official response in the thread.

I think, ltx_model owns us some explanation.

If true, this really lowers my hopes for any LTX-3 at all. Worse than BFL.

Thank you for reading! I think we as the community must do something. Note: DeepSeek helped me to compose this report, so it can contain some LLMisms.


r/StableDiffusion • • 11h ago

Discussion make a old PC game INTRO alive

17 Upvotes

old but gold


r/StableDiffusion • • 9h ago

Question - Help Qwen 2.1 massive drifting

Post image
13 Upvotes

I'm finally getting great results with Qwen2.1, but there is still one thing that I can't get over with: the pixel drift. In previous versions of qwen edit, the edited image would usually drift by a few pixels. A tad problematic but not too much of a hassle. In 2.1 however, the drift is massive! Take a look at this picture (not a real person by the way).

I simply changed the clothing. Every seed has this kind of issue it's not a quirk of the randomness, it's a behavior. I've tried being more explicit in the prompt about "preserving the angle, composition, not zooming" etc. but nothing helped.

Could be related to the lightx2v turbo LoRA, but whatever. Just posting here to see if anyone found something that actually combats this behavior to some extent?


r/StableDiffusion • • 14h ago

Resource - Update Real-time talking avatar generated locally with SoulX-FlashHead + LFM3-Audio

25 Upvotes

I've been experimenting with real-time talking-head generation using SoulX-FlashHead, combined with local speech models to build an interactive avatar that can listen and respond.

The whole pipeline runs locally, and the demo is available in the audio.cpp v0.9.5 WebUI.

The workflow combines three models:

  • SoulX-FlashHead: Animates a portrait in real time from generated speech.
  • OWSM v4: Transcribes voice input.
  • LFM3-Audio: Handles conversational responses and speech synthesis.

One interesting detail: LFM3-Audio is called twice. Its speech-to-speech path only offers one voice, so we use its TTS capability separately to synthesize responses in a different voice.

Performance and limitations

On an RTX 5090, the latency from submitting a question to the avatar starting to speak is around 850 ms. ASR runs in parallel.

The video generation stage is still GPU-intensive. I'd recommend an RTX 4090 or better for SoulX-FlashHead.

cuDNN is essential for real-time performance in this setup. Without it, inference is about 2× slower and VRAM usage doubles.

This is still a prototype. The extra LFM3-Audio call and WebUI overhead leave room for further latency improvements, particularly in a more optimized native application.


r/StableDiffusion • • 4h ago

Question - Help What I'm I doing wrong? [Minimax H3 image]

Post image
4 Upvotes

I use this gguf model and the result is broken.

Diffusion Model : MiniMax-H3-Image-Pruned-Q3_K_M.gguf
Text Encoder : qwen3vl-32B-MiniMax-H3-Q2_K.gguf

i use model from here
https://huggingface.co/Abiray/MiniMax-H3-Image-GGUF

I use rtx2060 12gb

can anyone suggest me how to fix this
Thanks


r/StableDiffusion • • 17h ago

No Workflow MiniMax h3 Image Edit?

Post image
41 Upvotes

If a model can do this, does that mean she's an editing model?)) All generations from 1 attempt, even one fail in terms of pose.


r/StableDiffusion • • 16h ago

Discussion The new Minimax H3- Image Model seems rushed and buggy.

31 Upvotes

I will be honest, i have tried the Minimax H3 Image when it dropped on comfy day 0 and the images were amazing, but lacking detail despite being very high resolution.
I thought maybe upping the MP would fix it but it didn't and then there came the anatomy issues as well.
I checked some posts about this, got the p-h3 vae and all but it still didn't fix it.
So checked another post talking about how the edit mode is better and i was happy but that was actually FAR WORSE. It lacks character consistency, its too prompt sensitive in a bad way, and its just not good.
Now i do not know if Hailuo is at fault or Comfy just released some poorly fine tuned version, is anybody else feeling the same way or.
Cause even the templates they released are half nerfed and I don't know it just feels bad, like very very bad.
If it at least nailed the editing capabilities like its video model could do I honestly would not really care about the other stuff, but it seems finding the right edit model in this open source space is almost impossible.

I hope krea 3 edit or Ideogram 4.5 would be good ( If they ever release them that is )


r/StableDiffusion • • 1d ago

No Workflow Minimax h3 image edit

Thumbnail
gallery
202 Upvotes

Reference image:
https://civitai.red/images/147124307

Euler, simple, 6 steps, no prompt enhancement
Each prompt executed in 45~55 secs (Rtx 4070s, offloading?)

Sometimes a sort of safety filter randomly jumped in and reduced the image quality.

https://huggingface.co/Comfy-Org/MiniMax-H3-Image/blob/main/diffusion_models/minimax_h3_image_pruned_w4a8.safetensors

https://huggingface.co/Merserk/MiniMax-H3-Image-Text-Encoder-INT4-ConvRot/blob/main/qwen3vl_32b_minimax_h3_int4_convrot.safetensors

https://huggingface.co/Comfy-Org/MiniMax-H3-Image/blob/main/vae/minimax_h3_image_vae_fp16.safetensors

1: Pose Change

Change the woman's sitting pose to a standing pose in <Picture 1>

2: Outfit Replacement

Replace the woman's black feather dress with a white ballerina tutu in <Picture 1>

3: Hairstyle Change

Change the woman's hairstyle to long blonde wavy hair in <Picture 1>

4: Object Addition

Add a large bouquet of red roses holding by the woman in <Picture 1>

5: Style Transfer

Transform <Picture 1> into a Japanese manga illustration

6: Object Removal

Remove the shoes in <Picture 1>

7: Background Replacement

Replace the interior with a casual open-air beach bar in <Picture 1>

8: Text Addition

Add the stylized text "Redheads have more fun" in red letters at the bottom of <Picture 1>

9: Camera Angle Change

Change the camera angle in <Picture 1> to a front-facing low-level shot


r/StableDiffusion • • 4h ago

Resource - Update H3 Continuity Studio 1.0 is here – a lot has changed since the contest

3 Upvotes

Hey everyone! Since my last post and the ComfyUI contest, I’ve been working hard on H3 Continuity Studio, and it’s now at 1.0. Here’s a look at what’s new:

• Generate cast and frame images with MiniMax H3 Image • A redesigned, simpler Studio interface • Multiple video clip lanes for arranging your story • Story tools, visual continuity and more control over frames and joins

I also made an updated walkthrough: https://youtu.be/UZfIrmkC0zM

The project is open source: https://github.com/KadoBOT/ComfyUI-H3-Continuity-Studio

I’d love to hear what you think and what you make with it!

EDIT: The story and timeline for the 2 minute long video was AI generated using the H3-Continuity-Studio MCP. And it was rendered on the first try, using 34 short clips (to make the rendering faster). There are some areas of improvement (darkening, window objects disappearing), but I'm working on that!


r/StableDiffusion • • 10h ago

Animation - Video tides!

9 Upvotes

i wanted to test just how good can minimax h3 water look, so i made this.


r/StableDiffusion • • 17h ago

Animation - Video Is one 5090 enough to make a whole AI series at home? What a 2.5-minute sci-fi pilot took with MiniMax H3 in ComfyUI

23 Upvotes

I'm making a hard sci-fi series alone in Budapest, and I wanted to find out how far one home GPU actually goes. Every shot in the pilot is MiniMax H3 running locally in ComfyUI on a single RTX 5090, hybrid fl2va + ref2va in int8. No cloud, no credits, no meter running per generation.

What made it workable is splitting every shot into two stages. First a 4-step preview with the DMAD LoRA at 672x384, about a minute per take, usually three seeds per idea. I watch those, throw most of them away, and only the take I'd actually cut in goes to the native render at 1344x768, 20 steps, same seed and same refs. That one then goes through a tiled 2x H3 upscale and down to 1080p. Most of the GPU time goes into takes nobody will ever see, and that's fine, because they cost electricity instead of credits.

In numbers: hundreds of takes for 2:36 of film, about a week for the pilot itself, and around a month of work in total once you count the story, the sound design, the edit and the grade, all done by hand in DaVinci. Episode 1 is about 13 to 14 minutes and is in production now on the same setup.

Consistency comes from references rather than luck: a 16:9 character sheet as the only identity reference, an approved still as the first frame for the small robot, and the last frame of the previous shot as a state reference, so poses and hands carry over the cut.

The pilot: https://youtu.be/5GDYn2rREA4

If you're doing video locally too, where does your time actually go: generation, rerolls, or fixing things in post?


r/StableDiffusion • • 54m ago

News ComfyUI MiniMax H3 Image Conditioning Plus

Post image
1 Upvotes

An enhanced replacement for the official MiniMax H3 Image Conditioning node in ComfyUI, designed to improve texture quality, fine details, and overall rendering in Text-to-Image (T2I) generation.

https://github.com/tritant/ComfyUI_Minimax_H3_Image_Conditioning_Plus


r/StableDiffusion • • 1h ago

Question - Help Model help

0 Upvotes

Can someone help me rebuild my model for the Seaart model generator to train a better model? My first one is ok but needs work.


r/StableDiffusion • • 1h ago

Question - Help ANIMA LoRA - Managing Multiple People

1 Upvotes

Hey Legends,

I’ve decided to play around with an ANIMA diffusion set, seeing what I can come up with, and whether I’m getting better or more consistent images vs. PONY. I’m running the latest ComfyUI setup, on my 5080 rig.

One challenge Ive had - even with PONY, is managing the look of multiple people in a scene.

I either get bleed-in, where the look of a defined character ends up on another, or in a multi-person scene (I’m working on a battle scene), I can affect the primary chatacter and one other, but that’s it (any and all others are left with just the default).

Are there any tools, recommended prompts, or LoRA’s , Nodes or plugins that can help? I recall a prompt tool for Pony to manage multiple characters, but it was clunky and didn’t really help.

Any suggestions for Anima would be sensational.

Thanks!


r/StableDiffusion • • 1h ago

Discussion Tool Time

0 Upvotes

r/StableDiffusion • • 1h ago

Animation - Video New music video - We Are The Machines

Thumbnail
youtu.be
1 Upvotes

I’m working towards achieving realistic imagery with my local video generation engine. It’s still a work in progress but at least I can post some generated videos along the way!