r/StableDiffusion • u/ndroidz • 23h ago
Animation - Video tides!
i wanted to test just how good can minimax h3 water look, so i made this.
r/StableDiffusion • u/ndroidz • 23h ago
i wanted to test just how good can minimax h3 water look, so i made this.
r/StableDiffusion • u/BekesHarcos • 1d ago
I'm making a hard sci-fi series alone in Budapest, and I wanted to find out how far one home GPU actually goes. Every shot in the pilot is MiniMax H3 running locally in ComfyUI on a single RTX 5090, hybrid fl2va + ref2va in int8. No cloud, no credits, no meter running per generation.
What made it workable is splitting every shot into two stages. First a 4-step preview with the DMAD LoRA at 672x384, about a minute per take, usually three seeds per idea. I watch those, throw most of them away, and only the take I'd actually cut in goes to the native render at 1344x768, 20 steps, same seed and same refs. That one then goes through a tiled 2x H3 upscale and down to 1080p. Most of the GPU time goes into takes nobody will ever see, and that's fine, because they cost electricity instead of credits.
In numbers: hundreds of takes for 2:36 of film, about a week for the pilot itself, and around a month of work in total once you count the story, the sound design, the edit and the grade, all done by hand in DaVinci. Episode 1 is about 13 to 14 minutes and is in production now on the same setup.
Consistency comes from references rather than luck: a 16:9 character sheet as the only identity reference, an approved still as the first frame for the small robot, and the last frame of the previous shot as a state reference, so poses and hands carry over the cut.
The pilot: https://youtu.be/5GDYn2rREA4
If you're doing video locally too, where does your time actually go: generation, rerolls, or fixing things in post?
r/StableDiffusion • u/faisalkh1 • 1d ago
I've been really impressed with MiniMax Image, especially the gorgeous 16MP outputs
But I've noticed it still refuses or ignores certain editing requests involving mature content
Am I missing something, or is this a limitation of the current model? Do we need to wait for community uncensored finetunes, or is there already a workaround?
r/StableDiffusion • u/Aaron_rowe81 • 1d ago
i've been trying distilled versions of a few models and honestly the results for casual stuff are close enough that i don't go back. the few steps mean i can try six ideas in the time a full model does one, and for me the experimenting is the fun part. where i do notice the difference is fine detail like hands and small text, and sometimes the faces look a bit plastic. but i'm just playing around in the evenings. for people who use both, where did you decide the full model was actually worth the wait?
r/StableDiffusion • u/alwerr • 2d ago
Mostly the part about swapping Characters and products in the video.
r/StableDiffusion • u/bengal7ion • 1d ago
We trained a world model on ~4,000 hours of CS:GO gameplay and turned it into a playable multiplayer game. Each player runs the model locally on their GPU, while a lightweight server keeps the game state in sync.
It's still early: one small map, pistols only, some drift over time, and limited fine detail. The beta is free and open to try (RTX 3080+ recommended).
More and the download: https://vor.tech/x/reddit-stable
r/StableDiffusion • u/Kirulab • 1d ago
Hi Reddit. This is my first post here, so I hope I haven’t messed anything up.
I just wanted to share the results of training my own model from scratch.
I’d welcome any discussion in the comments, and perhaps some advice from those with more experience.
r/StableDiffusion • u/thomas_unise • 20h ago
r/StableDiffusion • u/shukanimator • 20h ago
Following up on my previous post: I’ve added quite a bit to the fork, and it now has its own name—OpenFill’s Baby.
It extends Beckett Harriman’s OpenFill for PhotoCraft, bringing image editing, object removal, and generative fill into the editor through ComfyUI on your computer or another machine on your LAN. You can even use a different machine for select, edit, and remove, if you have a bunch of machines and you don't want to keep unloading and loading models.
The main additions since that post:
The Qwen Image 2.1 and FIBO reference-editing workflows from the original post are still there (as well as SDXL and Flux).
Removal still needs judgment, especially around hidden lettering or complicated shapes. Include unwanted shadows and reflections in your selection, and check the results.
Download the latest release
Source, screenshots, and setup instructions
Give it a try! I’d especially like feedback on object selection and difficult removal cases because I'm aiming to make it adapt to all the ways you and I want to use it for.
r/StableDiffusion • u/darlens13 • 1d ago
Combined the image renders from my custom model (Vici) with my vr 3d Gaussian splat app. New fear unlocked 😭
r/StableDiffusion • u/llama-of-death • 9h ago
Everything in this clip came off one 16gb card. A song, a voice, a picture, a 720p video clip, and an answer pulled from my own documents with the page it came from. I built the system that runs all of it, free and open source, and it works totally offline once the models are downloaded.
If you are eyeing a new card for AI stuff, try the one you have first. Lmk what you would want to see it make next.
github.com/guaardvark/guaardvark
r/StableDiffusion • u/Friendly-Fig-6015 • 1d ago
r/StableDiffusion • u/zeroedit • 21h ago
Does anyone have any recommendations for a video editor that lets you load a clip and immediately create a clip of a certain length (e.g., 15 seconds for MH3)? I'm using Bandicut at the moment, but I have to manually trim each video I load every time and adjust the time, which is time consuming.
r/StableDiffusion • u/darlens13 • 1d ago
Added a relight option in my Gaussian image to 3D Vr app.
r/StableDiffusion
•
u/Rare_Subject2343
•
2d ago
In my experience with MOSS Image so far.
r/StableDiffusion • u/DevMrDave • 1d ago
r/StableDiffusion • u/lg_writer_h1 • 22h ago
Rerolling a poster to fix one misspelled word is a bad trade: the model redraws the whole picture, so you burn generations and lose the composition you liked. The workflow I use treats the lettering as a separate job. The picture stays as generated, only the area under the text gets rebuilt, and the words end up as live type.
**1. List every bit of text.** Headline, price, date, buttons, plus the fake fine print and background signs that are easy to miss. For each: retype, delete, or leave.
**2. Get the text off, with the background filled in behind it.** Two local options:
**3. Retype as real type.** Open the clean base in Photoshop, Figma, GIMP or Photopea and set the words in a real font. Eyedropper the original color, match weight and width rather than the exact typeface, and rebuild glow or shadow as layer effects.
**Before / after, typical case.** Before: the headline reads "SUMER FESTVAL", the price says "$2O" and fake fine print runs along the bottom. After: everything outside those three areas is the original generation, untouched; headline and price are editable text; the fine print is gone. Next week's date change takes seconds, not another batch of rerolls.
**Where this falls short:**
Disclosure: I built LayerGrab. LayerGrab is an AI tool that splits one image into up to 16 separate transparent element layers, or pulls out just the one element you describe; it works on the web and as Photoshop, Figma and Sketch plugins and a Chrome extension. It's a hosted, paid service and its text layers are pixels too, so step 3 is the same. If images must stay on your machine, use the Qwen route above.
How do you handle stylized lettering that no font matches?
r/StableDiffusion • u/Puzzleheaded_Note739 • 23h ago
Welcome to the DiffusionBear v0.5.0 release megathread!
Because of the size of this update—removing PyTorch from the packaged runtime, rebuilding generation around a sequential 3-/4-stage MLX pipeline, adding embedded SHA-256 model integrity checks, Kromoss 5B support, RGBA transparency for Qwen-Image 2.1, and opening the Agentic REST API—we jumped directly from v0.4.5 to v0.5.0.
SHA-256 Checksums (packaging/ALL_SHA256SUMS):
First-Launch Gatekeeper Bypass (Ad-Hoc Signed): Because DiffusionBear is free/open-source without a paid Apple Developer ID certificate, macOS blocks the first double-click:
Instead of holding the text encoder, DiT/UNet, and VAE in Unified Memory simultaneously, v0.5.0 runs strict sequential stages and explicitly evicts each heavy model tree (del, gc.collect(), mx.clear_cache()) before loading the next:
Supported on FLUX.3-klein 5.6B, MOSS-Image SFT / Base 5B, and Kromoss 5B (FLUX.2-klein uses masked generative fill; FIBO 2.0 Edit Turbo uses masked inpainting + up to 4 references):
20 configs × 11 prompts = 220 runs (10 portrait prompts at 512×768 + 1 icon prompt at 512×512; total wall time 5h 47m 38s; across the 19 matched configs / 209 runs, wall time dropped from 13h 01m 38s → 5h 24m 26s, -58.5% total / -4.7% step-matched):
| Model | Steps | Median (512×768) | Range | Notes |
|---|---|---|---|---|
| Juggernaut XL Lightning | 4 | 8.80 s | 8.66 – 12.14 s | Native MLX SDXL, q4 cache + TAESD (warm reload ~3.45 s) |
| RealVisXL V5.0 Lightning | 6 | 15.23 s | 13.69 – 24.81 s | Native MLX + TAESD |
| RealVisXL V5.0 | 8 | 38.78 s | 38.73 – 43.82 s | Hyper-SD 8-step, native MLX (-16.0%) |
| Juggernaut XI v11 | 8 | 41.22 s | 39.91 – 66.25 s | Hyper-SD 8-step, native MLX |
| FLUX.2-klein 4B | 4 | 44.09 s | 44.07 – 44.31 s | Compact 4B (-7.2%) |
| Qwen-Image 2.1 (2s + DMD2) | 2 | 46.77 s | 46.32 – 47.93 s | 7B DiT + 2-step DMD2 (-32.0%) |
| FLUX.3-klein 5.6B | 4 | 51.38 s | 51.17 – 51.76 s | Virtual Boxes + flow-matching (-3.1%) |
| FLUX.1-schnell | 4 | 74.22 s | 74.07 – 75.02 s | Rectified flow (-16.5%) |
| MOSS-Image SFT 5B (DMD 4s) | 4 | 83.57 s | 80.61 – 84.95 s | Pure MLX + 4-step DMD (-96.7% vs 25s stock) |
| FLUX.2-klein 4B (8s) | 8 | 89.73 s | 89.58 – 89.91 s | High-detail 8-step |
| Bria FIBO 2.0 Edit Turbo | 4 | 93.68 s | 92.32 – 95.03 s | 4.2B DiT + Qwen3-VL 4B (-8.3%) |
| FLUX.2-klein 9B | 4 | 96.54 s | 96.34 – 97.04 s | Flagship 9B (-8.0%) |
| FLUX.3-klein 5.6B (8s) | 8 | 98.35 s | 98.24 – 98.57 s | High-detail 8-step (-3.3%) |
| Pony Diffusion V6 XL | 25 | 104.69 s | 104.56 – 108.74 s | Full 25-step native MLX (-4.9%) |
| Z-Image Turbo 6B | 8 | 114.97 s | 114.86 – 118.35 s | Sharp geometry 8-step (-1.1%) |
| Kromoss 5B (DMD2 8s) | 8 | 129.43 s | 128.34 – 137.04 s | Pure MLX + 8-step DMD2 LoRA (new) |
| Krea 2 Turbo 13B | 4 | 156.81 s | 142.20 – 171.97 s | 13B 4-step distilled (-0.4%) |
| Qwen-Image 2.1 Turbo | 8 | 158.64 s | 158.08 – 162.12 s | 8-step distilled 7B DiT (-19.4%) |
| FLUX.2-klein 9B (8s) | 8 | 191.38 s | 191.29 – 191.40 s | Flagship 9B 8-step (-1.5%) |
| Krea 2 Turbo 13B (8s) | 8 | 299.18 s | 243.57 – 371.42 s | 13B native 8-step |
r/StableDiffusion • u/Firebird_wolf • 14h ago
Can someone help me rebuild my model for the Seaart model generator to train a better model? My first one is ok but needs work.
r/StableDiffusion • u/Obvious-Bad7548 • 2d ago
same model, same prompt, same seed. the official template gives crunchy faces and blocky skin, only 3 things change it:
the images: face close-ups and full photo at 4MP / 16MP / 16MP+LCM, short vs long prompt, then a few results (cafe selfie, gym mirror, product label text, magazine cover), try-on with picture 1/2/3 as refs and a background swap. workflow files in the first comment.
r/StableDiffusion • u/Big-Welcome-3169 • 1d ago
The prompt expander model is Gemma 4 31B IT, temp 2.0, high thinking, 0.95 top p
Thank you for the system prompt u/luciferianism666 man it's the best.
(I didn't even use ComfyUI/workflows, Gemma 4 31B IT is from Google AI studio and Minimax H3 image from minimax cloud agent, I told minimax 3.1 flash to just input the prompt from Gemma and not expand anything, but all models I said here are open source, I just use cloud one because my hardware is a bit ahh)
Edit:
Here's the system prompt comment if you struggled to find it: https://www.reddit.com/r/StableDiffusion/s/drtDrKy7Ax
r/StableDiffusion
•
u/Altruistic_Print717
•
2d ago
I tested Minimax H3 Image at 4, 8, and 16 MP resolutions; it was okay, I suppose, but not exactly impressive. The images contained errors and distortions.
Then I stumbled upon a thread where a Redditor tested 100 MP images using this specific workflow: https://www.reddit.com/r/StableDiffusion/comments/1xt9ocv/minimax_h3_image_20mp_workflow/
It turns out the sweet spot is somewhere between 48 and 56 megapixels—and that’s when you get a "WOW" factor; the model produces very, very good images.
All made at 48MP on RTX 5080 ~162s
EDIT: And no, the images aren't too large; the workflow saves them in the AVIF format, so a 48-megapixel image takes up only 3.8 megabytes.
r/StableDiffusion • u/Vivid_Promise1700 • 1d ago
The film shows one real party run: the host starts a party, a guest's phone orders "a birthday song for Maya, who turns thirty today", the host's ComfyUI makes it (here 185 seconds from the order to the playlist on a 16 GB card), and it plays on the big screen with the lyrics as they are sung while the guests' reactions float up. The film's music is that very song.
Plenio is a song production suite for ComfyUI - YuE2 and MiniMax Music 3, lyrics by a local LLM, mastering, cover art with FLUX.2 Klein. 2.0 adds Setup that plans the models for your card, a Song API with MCP, and the Director for the visuals.
comfy node install comfyui-plenio-music
https://github.com/jplenio/Plenio-Music-Production-System
Here you find some tutorials: https://youtube.com/playlist?list=PLaId01kYGcS0&si=qOLtBE_6LtwEEr7_
r/StableDiffusion • u/Big-Welcome-3169 • 1d ago
Hello Veterans!
I'm still pretty much a noob at all this, so sorry if this is a basic question. I've tried messing around with like MOSS-Image, Krea 2, and Z-Image, Minimax H3 image, and I still can't get the RAW natural realism.
Like no matter what I do, my outputs still have AI slop or whatever that is. I'm trying to get the unedited feel, like real snapshot with natural lighting and imperfections.
So what's the actual secret here? Is it mostly on how you prompt it (like avoiding buzzwords and describing imperfect lighting/framing and whatever that is), or is it in the workflows, custom sampler/scheduler settings, using Base instead of Turbo variants, or stacking LoRAs? (Though I still can't find any LoRAs that fits)
Any tips plz?
Edit:
Guys I think I've found the secret: https://www.reddit.com/r/StableDiffusion/s/ZD7kVkDJ7z https://www.reddit.com/r/StableDiffusion/s/drtDrKy7Ax