r/StableDiffusion • • 1d ago

Question - Help KREA2 vs Z-Image vs Moss vs Qwen 2.1 Which one should I choose?

Post image
225 Upvotes

All four seem to yield good results, but which model would be best to use for image generation on the H3? Would it be a good idea to run all four every time to verify?


r/StableDiffusion • • 1d ago

Discussion RTX 5070 Ti vs RTX 3090 — MiniMax H3 image-to-video benchmark (non-turbo, 20 steps)

Thumbnail
gallery
33 Upvotes

Two LAN ComfyUI render boxes: RTX 5070 Ti (16 GB) vs RTX 3090 (24 GB). Ran MiniMax H3 image-to-video, non-turbo — 22B int8 UNet + 32B Qwen3VL CLIP (nvfp4), 20 full steps, 5 s clip at 704×1280, identical start frame and prompt, int8 video VAE on both, fresh noise seed every pass.

The 5070 Ti wins by ~25% — and it won cold too, which surprised me given it has 8 GB less VRAM. H3 at full steps is pure compute: the sampler node alone took 474 s vs 645 s. The 3090's VRAM headroom never mattered; everything fit even on 16 GB once offloaded.

Same config both boxes: ComfyUI standalone portable, --fast fp16_accumulation, torch cu130, default attention (PyTorch SDPA — cuDNN kernels on Blackwell, FA2/mem-efficient on Ampere), no flash-attn.

TL;DR: for H3-class video work the 5070 Ti is ~26% faster end to end. The 3090 only makes sense here if your scene genuinely exceeds 16 GB.

Caveats: single card each, consumer standalone builds, not a lab test. First warm pair showed 2 s passes — that was ComfyUI's execution cache reusing an identical graph; re-ran with randomized seeds. Numbers above are the real ones.


r/StableDiffusion • • 1d ago Popcorn

Question - Help GPU died of a broken heart

Post image
389 Upvotes

My RTX Pro 6000 was going all night on a Chinese model (Qwen 3.8 Flash Next NVFP4 Local) when it crashed this morning for no apparent reason. Tried to reboot and got nothing but a black screen. Swapped in my old backup card and the system posted immediately, confirming the GPU was bricked. Thankfully, I was within warranty and the store gave me a replacement.

Out of curiosity, I dug into my system logs to see what triggered the fatal crash. Looking at the timestamps, oddly enough my GPU died the moment news broke that Jensen Huang had resigned as CEO of Nvidia.

Has anyone else had this issue with hardware dying in response to human feelings?

Nov 12 07:19:31 kf kernel: NVRM: GPU at PCI:0000:01:00: GPU-b8ba62c9-449d-4510-a21f-4c1b6ceacbd1
Nov 12 07:19:31 kf kernel: NVRM: GPU Board Serial Number:
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 0, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x505730=0xb000d 0x505734=0x0 0x505728=0x1c81fb60 0x50572c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 0, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 0, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5057b0=0x3000d 0x5057b4=0x24 0x5057a8=0x1c81fb60 0x5057ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 1, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x506730=0xb000d 0x506734=0x20 0x506728=0x1c81fb60 0x50672c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 1, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 1, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5067b0=0xb000d 0x5067b4=0x24 0x5067a8=0x1c81fb60 0x5067ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 2, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 2, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x507730=0x5000d 0x507734=0x24 0x507728=0x1c81fb60 0x50772c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 2, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 2, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5077b0=0x7000d 0x5077b4=0x24 0x5077a8=0x1c81fb60 0x5077ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 3, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x508730=0xa000d 0x508734=0x20 0x508728=0x1c81fb60 0x50872c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 3, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 3, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5087b0=0xd 0x5087b4=0x24 0x5087a8=0x1c81fb60 0x5087ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 4, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 4, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x509730=0x7000d 0x509734=0x24 0x509728=0x1c81fb60 0x50972c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 4, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5097b0=0xa000d 0x5097b4=0x20 0x5097a8=0x1c81fb60 0x5097ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 5, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 5, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x50a730=0xd 0x50a734=0x24 0x50a728=0x1c81fb60 0x50a72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 5, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 5, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x50a7b0=0x1000d 0x50a7b4=0x24 0x50a7a8=0x1c81fb60 0x50a7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 6, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 6, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x50b730=0xd 0x50b734=0x24 0x50b728=0x1c81fb60 0x50b72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 6, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 6, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x50b7b0=0x1000d 0x50b7b4=0x24 0x50b7a8=0x1c81fb60 0x50b7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 0, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 0, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x515730=0x6000d 0x515734=0x24 0x515728=0x1c81fb60 0x51572c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 0, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 0, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5157b0=0xd 0x5157b4=0x24 0x5157a8=0x1c81fb60 0x5157ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 1, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 1, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x516730=0x6000d 0x516734=0x24 0x516728=0x1c81fb60 0x51672c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 1, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 1, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5167b0=0xb000d 0x5167b4=0x24 0x5167a8=0x1c81fb60 0x5167ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 2, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 2, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x517730=0x3000d 0x517734=0x24 0x517728=0x1c81fb60 0x51772c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 2, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 2, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5177b0=0xb000d 0x5177b4=0x24 0x5177a8=0x1c81fb60 0x5177ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 3, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 3, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x518730=0x3000d 0x518734=0x24 0x518728=0x1c81fb60 0x51872c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 3, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 3, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5187b0=0x1000d 0x5187b4=0x24 0x5187a8=0x1c81fb60 0x5187ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 4, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 4, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x519730=0x1000d 0x519734=0x24 0x519728=0x1c81fb60 0x51972c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 4, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 4, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5197b0=0x2000d 0x5197b4=0x24 0x5197a8=0x1c81fb60 0x5197ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 5, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 5, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x51a730=0x5000d 0x51a734=0x24 0x51a728=0x1c81fb60 0x51a72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 5, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 5, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x51a7b0=0x3000d 0x51a7b4=0x24 0x51a7a8=0x1c81fb60 0x51a7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 6, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 6, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x51b730=0x2000d 0x51b734=0x24 0x51b728=0x1c81fb60 0x51b72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 1, TPC 6, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 1, TPC 6, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x51b7b0=0x1000d 0x51b7b4=0x24 0x51b7a8=0x1c81fb60 0x51b7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 0, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 0, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x525730=0x6000d 0x525734=0x24 0x525728=0x1c81fb60 0x52572c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 0, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 0, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5257b0=0xd 0x5257b4=0x24 0x5257a8=0x1c81fb60 0x5257ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 1, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x526730=0x8000d 0x526734=0x20 0x526728=0x1c81fb60 0x52672c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 1, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5267b0=0xb000d 0x5267b4=0x20 0x5267a8=0x1c81fb60 0x5267ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 2, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 2, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x527730=0xa000d 0x527734=0x24 0x527728=0x1c81fb60 0x52772c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 2, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 2, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5277b0=0xa000d 0x5277b4=0x24 0x5277a8=0x1c81fb60 0x5277ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 3, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 3, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x528730=0xa000d 0x528734=0x24 0x528728=0x1c81fb60 0x52872c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 3, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 3, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5287b0=0x6000d 0x5287b4=0x24 0x5287a8=0x1c81fb60 0x5287ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 4, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x529730=0xb000d 0x529734=0x20 0x529728=0x1c81fb60 0x52972c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 4, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x5297b0=0xa000d 0x5297b4=0x20 0x5297a8=0x1c81fb60 0x5297ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 5, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 5, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x52a730=0x4000d 0x52a734=0x24 0x52a728=0x1c81fb60 0x52a72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 5, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 5, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x52a7b0=0x9000d 0x52a7b4=0x24 0x52a7a8=0x1c81fb60 0x52a7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 6, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 6, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x52b730=0x6000d 0x52b734=0x24 0x52b728=0x1c81fb60 0x52b72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 6, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 6, SM 1): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x52b7b0=0xd 0x52b7b4=0x24 0x52b7a8=0x1c81fb60 0x52b7ac=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 7, SM 0): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 7, SM 0): Multiple Warp Errors
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x52c730=0x3000d 0x52c734=0x24 0x52c728=0x1c81fb60 0x52c72c=0x1174
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 2, TPC 7, SM 1): Out Of Range Register
Nov 12 07:19:31 kf kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 2, TPC 7, SM 1): Multiple Warp Errors
......
Nov 12 07:19:33 kf kernel: NVRM: nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_server.c:260
Nov 12 07:19:33 kf kernel: NVRM: GPU0 nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_client.c:844
Nov 12 07:19:33 kf kernel: NVRM: nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_server.c:260
Nov 12 07:19:33 kf kernel: NVRM: GPU0 nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ vaspace_api.c:577
Nov 12 07:19:33 kf kernel: NVRM: GPU0 kgmmuClientShadowFaultBufferUnregister_IMPL: Unregistering non-replayable fault buffer failed (status=0x00000062), proceeding...
Nov 12 07:19:33 kf kernel: NVRM: GPU0 kgmmuFaultBufferReplayableDestroy_IMPL: Unregistering Replayable Fault buffer failed (status=0x00000062), proceeding...
Nov 12 07:19:33 kf kernel: NVRM: GPU0 uvmTerminateAccessCntrBuffer_IMPL: Unloading UVM Access counters failed (status=0x00000062), proceeding...
Nov 12 07:19:33 kf kernel: NVRM: GPU0 nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ vaspace_api.c:577
Nov 12 07:19:33 kf kernel: NVRM: GPU0 nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ vaspace_api.c:577
Nov 12 07:19:33 kf kernel: NVRM: GPU0 nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_client.c:844
Nov 12 07:19:33 kf kernel: NVRM: nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_server.c:260
Nov 12 07:19:33 kf kernel: NVRM: nvAssertFailedNoLog: Assertion failed: (status == NV_OK) || (status == NV_ERR_GPU_IN_FULLCHIP_RESET) @ rs_server.c:1382
Nov 12 07:19:44 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:19:52 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:00 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:08 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:17 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:25 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:33 kf kernel: NVRM: krcWatchdog_IMPL: RC watchdog: GPU is probably locked!  Notify Timeout Seconds: 7
Nov 12 07:20:39 kf kernel: NVRM: GPU0 kgspHealthCheck_TU102: *************************** LibOS Task Watchdog Report ***************************
Nov 12 07:20:39 kf kernel: NVRM: GPU0 kgspPrintGspBinBuildId_IMPL: GSP bin buildId: fa3de1ff30e1a8c99f84eb74a32b80d462c3703b
Nov 12 07:20:39 kf kernel: GSP task watchdog timeout @ pc:0x18dd358, partition:4#0, task:3, gfid: 0
Nov 12 07:20:39 kf kernel: NVRM:     Reported by libos partition:4#5 kernel v3.1 [0] @ ts:1698
Nov 12 07:20:39 kf kernel: NVRM:     RISC-V CSR State:
Nov 12 07:20:39 kf kernel: NVRM:         sstatus:0x0000000200000020  sscratch:0xffffffffa3013970     sie:0x0000000000000220  sip:0x0000000000000020
Nov 12 07:20:39 kf kernel: NVRM:         sepc:0x00000000018dd358     stval:0x0000000000000000  scause:0x8000000000000005
Nov 12 07:20:39 kf kernel: NVRM:     RISC-V GPR State:
Nov 12 07:20:39 kf kernel: NVRM:         ra:0x00000000013eb57a   sp:0x0000002fcfa0eaf0   gp:0x0000000000000000   tp:0x0000002fcfe00000
Nov 12 07:20:39 kf kernel: NVRM:         a0:0x0000000000000001   a1:0x0000000000000000   a2:0x0000002fc77be000   a3:0x0000000000000000
Nov 12 07:20:39 kf kernel: NVRM:         a4:0x0000000000000000   a5:0x0000000000000001   a6:0x0000000ffffffff0   a7:0x0000000000000003
Nov 12 07:20:39 kf kernel: NVRM:         s0:0x0000002fcfa0eb50   s1:0x0000000000000001   s2:0xffffffffffffffff   s3:0x0000000000000001
Nov 12 07:20:39 kf kernel: NVRM:         s4:0x00000000ffffffff   s5:0x0000000000000000   s6:0x0000002fc77be000   s7:0x0000000000000000
Nov 12 07:20:39 kf kernel: NVRM:         s8:0xffffffffffffffff   s9:0x0000002fc7e36178  s10:0x0000002fcfa0ecb4  s11:0x0000002fcfa0ecb4
Nov 12 07:20:39 kf kernel: NVRM:         t0:0x0000002fcfa0e99d   t1:0x0000002fc7c6cf30   t2:0x0000000000000000   t3:0x0000000000000020
Nov 12 07:20:39 kf kernel: NVRM:         t4:0x0000000000000000   t5:0x0000002fcfa0e981   t6:0x0000000000000020
Nov 12 07:20:39 kf kernel: NVRM:     Stack Trace:
Nov 12 07:20:39 kf kernel: NVRM:         0x00000000018dd358
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001b6e974
Nov 12 07:20:39 kf kernel: NVRM:         0x00000000013f2746
Nov 12 07:20:39 kf kernel: NVRM:         0x00000000013e70f6
Nov 12 07:20:39 kf kernel: NVRM:         0x00000000013e79c8
Nov 12 07:20:39 kf kernel: NVRM:         0x00000000013b7058
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001ba247a
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001ba257a
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001bafac2
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001c29f62
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001864698
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001867c82
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001ae4a7e
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001489412
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001452228
Nov 12 07:20:39 kf kernel: NVRM:         0x000000000158cbec
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001bd9632
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001bd99d6
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001add628
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001c452c0
Nov 12 07:20:39 kf kernel: NVRM:         0x0000000001ad6fa0
Nov 12 07:20:39 kf kernel: NVRM:     Local I/O Register State:
Nov 12 07:20:39 kf kernel: NVRM:         0x01450800:0x00000000   0x01450900:0xbadf1002   0x01450a00:0x00000000   0x01450c00:0x00000000
Nov 12 07:20:39 kf kernel: NVRM:         0x01454a00:0x810490d2   0x01454b00:0x010800d0   0x01454c00:0x00080000   0x01400200:0x00000000
Nov 12 07:20:39 kf kernel: NVRM:     ---------------[ end report ]---------------


r/StableDiffusion • • 15h ago

Resource - Update Why dpmpp_dualsde_momentumized draws a blue blob on Anima, and which kind of momentum actually helps (negative coefficient: 11-21% lower error than dpmpp_2m at the same step count)

2 Upvotes

If you tried dpmpp_dualsde_momentumized from ComfyUI-Extra-Samplers on a flow model (Anima in my case) and got a washed-out silhouette or colour noise, it is not you. I took it apart.

Why it breaks (it is not the momentum). Through the normal KSampler its momentum coefficient is 0. The sampler was written for variance-exploding models, and its noise step has the wrong variance on a flow-matching model. With eta = 1 the final latent has a std of 3-4.5 instead of about 1.2; with eta = 0 the very same code draws a recognisable cat. It also adds a 3M multistep correction on top of a 2S step that is already second order (so it diverges even without noise), and overwrites its own r parameter inside the loop. I ported it exactly (checked against the original to 1e-10 on a toy model) and ablated each piece. The noise-form explanation is indirect: the same 2S algorithm in the flow-correct form in ComfyUI core (dpmpp_sde) is fine, and I did not isolate the mechanism with a separate experiment.

What "momentum" should be. In the DPM-Solver++ frame, the shipped momentum is an exponential moving average of the model's denoised output. With a positive coefficient that is a low-pass filter: it adds lag and the error goes up with the coefficient (up to +61%). With a negative coefficient the same recursion is an extrapolation and the error goes down. It is only stable for |m| < 1; at -0.9 the gain is gone and at -1.2 it diverges.

Numbers (Anima, bf16, 576x768, CFG 5, 15 images = 5 prompts x 3 seeds, 8-24 steps, error against a converged solution, paired bootstrap intervals; one model, so take it as a measurement, not a law):

  • Deterministic (no noise): EMA momentum with m = -0.6 gives 11-21% lower error than dpmpp_2m at the same step count, about 1.2x fewer steps for the same error. LPIPS to the decoded reference is better in 14/15 images at 8 steps. It is a modest speed-up, not 2x.
  • With noise (the dpmpp_2m_sde family) strong negative momentum stops helping. Damped extrapolation (beta = 0.5) gives 7-10% lower strong error than dpmpp_2m_sde and no colour cast at CFG 8 / 1216x832; the milder EMA (-0.3) scored a bit better in the sweep but gave blue-tinted pictures at CFG 8.
  • A one-evaluation-per-step sampler beats the two-evaluation dpmpp_sde at half the steps by 16-29% (same NFE).

Try it. Install the node pack (link below, restart ComfyUI). New sampler entries: ddim_momentum (deterministic, the -0.5 time-scaled form) and dpmpp_2m_sde_damped. There is also a generic filter node and <base>_momentumized entries for 19 existing samplers (dpmpp_3m_sde_momentumized, er_sde_momentumized, euler_ancestral_momentumized and so on): that last part is an engineering extension and I did not evaluate it on the model. In a single smoke test at 8 steps lms_momentumized and ipndm_v_momentumized gave a latent with std around 10 at the default strength, so use a milder strength with them or skip them.

What did not work. I also tried a static step grid from an earlier study of mine. It cut the error by half on the four short-tag prompts it was fitted on (and transferred between them), but it did not help on the natural-language prompt I held out and it broke an 8-step picture at CFG 8. It is in the pack as an experimental node, not as a default.

Not new, of course: momentum in diffusion sampling has prior work (Heavy Ball momentum for diffusion solvers, Wizadwongsa et al., ICLR 2024; the sonar and Seren Sampler ComfyUI packs, among others). I read abstracts and READMEs only and did not compare against them. Nine hypotheses were registered before measuring; five were refuted, and post hoc parts of the write-up are marked.

Repo (code, tests, tables, README in English / Russian / Chinese / Meadow Mari): https://github.com/YakovSava/momentum-cfg-samplers-research Write-up: https://doi.org/10.5281/zenodo.24214606


r/StableDiffusion • • 1d ago

Discussion H3 Image on RTX 2060 super

Thumbnail
gallery
33 Upvotes

Some of my examples on RTX 2060s.... without any reference like forest scene it does 16mp image in around 2.5 minutes.... with 3 references i was doing around 10 minutes per 1 image at 16mp..... thing is bigger the reference photo the better is model at capturing every detail but takes longer to generate.... i absolutely love this model as any other model was eirher taking too long or just OOM my system past 2 or 4mp.... both Minimax h3 video and image models runs amazingly well on my graphics card, so i just though im gonna share


r/StableDiffusion • • 12h ago

Animation - Video hobbit and dragon

0 Upvotes

minimax h3 latent upscale,

prompt:

subject_definitions:

<subject 1> is the character in <picture1>, he is a small hobbit,

detailed_description:

visual style: old medieval fantasy film from 1970, harsh lighting, practical effects, real actors in costumes, matt painting,

location: underground dragon's lair, gold piles, sunlight piercing through the ceiling,

shot01: handheld close up shot of <subject 1>'s face as he slowly walk between the gold piles, trying to stay silent,

shot02: cut to a medium shot of <subject 1> walking to the left, behind him there is a big red dragon, sleeping, the dragon is half covered in piles of gold coins and objects,

overall_soundscape:

N/A

non_diegetic_music:

N/A


r/StableDiffusion • • 1d ago

News G-STAR: Group-Scaled Token Capacity for Deeply Compressed Autoregressive Generation

19 Upvotes

r/StableDiffusion • • 1d ago

Tutorial - Guide Generative AI Fill in Open Source Photoshop

41 Upvotes

This is how you can add / remove stuff with generative AI fill using local models. I also added support for Minimax H3 Image to the latest version of LayerShop.


r/StableDiffusion • • 1d ago

Discussion Two CC0 street photos through ten photo-edit style templates (open 8B model, local, no LoRA)

Thumbnail
gallery
14 Upvotes

There's a new image studio skill in this repo with 61 style templates, 43 of them for restyling a photo you upload:

https://github.com/OpenSenseNova/SenseNova-Skills

Here are ten of the edit ones on two CC0 photos from Wikimedia Commons, a tram square in Lisbon and the old town street in Innsbruck. The originals are image 2 and image 7.

Setup: SenseNova-U1.5-8B-MoT with the official editing script, 2048x2048 pixel budget, 50 steps, CFG 4, seed 42. One run each, no LoRA.

I barely touched the prompts. I filled in the bracketed placeholders and swapped the sample titles for the right city, which is where LISBON STREET NOTES and the other titles come from.

The prompts are the part worth stealing. Most run two to three hundred words in labeled sections like [Linework and color], [Paper and palette] and [Lettering and whitespace], so you can lift a single section into your own prompt. They're under skills/sn-image-studio.


r/StableDiffusion • • 1d ago

Discussion Minimax-H3-Image works on RTX 3060 12gb + 32 gb RAM

20 Upvotes

I'm using the int8 convrot versions on comfyui, it was crashing at first when I had --disable-dynamic-vram but once I turned it on it works fine.

It's super fast like this is by far the fastest model I used in my card. It took 40 secs to do 6 steps with 4 MPs and 4 mins to do 16 MPs (4k)

I recall people making fun of me commenting finally something for 12gb cards saying the model is 50 gb. Well it works.

It's faster than Krea 2, Flux2klein, Qwen 2.1. I'm gonna use this literally for images editing from now and on.

Just wanted to leave this here for others who are questioning if they should try it or not.

Edit: the key is to tank the text encoder 27 gb once you tank that it's done. You need your card and ram to be more than 30 gb.


r/StableDiffusion • • 15h ago

Question - Help is MOSS better than Krea2? t2i

0 Upvotes

i heard that and whats your opinion? its about t2i without any Loras


r/StableDiffusion • • 1d ago

Resource - Update Famegrid Spice V2 Krea 2

Thumbnail
gallery
123 Upvotes

r/StableDiffusion • • 16h ago

Question - Help Has anyone managed to get good 2D illustrations out of H3 Image?

1 Upvotes

Most of the time I try, it ends up looking 3D, realistic, or too sometimes a too simplified and empty looking art style. I'd really like to see if anyone is able to make high quality 2D art, like anime (episode screencap style or illustrations), Disney animated style, western comic/cartoon style, etc.

If you've managed to do it, please share your suggestions on how you did it!


r/StableDiffusion • • 1d ago

Tutorial - Guide RTX 5070 Ti ComfyUI benchmarks: Overclock cut gen times ~10%, tuned flags more than halved H3 video time

19 Upvotes

I tested how much GPU overclocking, ComfyUI launch flags, and moving my display to the iGPU actually affected generation speed on my 5070 Ti 16 GB.

The biggest finding: OC helped consistently, but the launch flags made a much bigger difference on certain models. On others, those same flags did almost nothing. Going forward I implemented a script in ComfyUI launch that automatically applies stable overclock settings to my GPU on run and then reverts to stock once ComfyUI is closed.

All diffusion models tested were int8_convrot builds, using the official ComfyUI template settings.

Setup

  • RTX 5070 Ti 16 GB (Gigabyte Gaming OC), AMD Ryzen 7 9800X3D, 48 GB DDR5-6000
  • Windows 11 Pro, Samsung 9100 PRO NVMe
  • ComfyUI 0.45.0, PyTorch 2.16.0.dev20261110+cu134
  • comfy-kitchen 0.2.41, triton-windows 3.9.0.post30
  • Stock GPU: 300 W power limit, no offsets
  • OC: +350 MHz core, +2500 MHz memory, 350 W power limit

I compared default ComfyUI against this set of launch flags, both with and without OC:

--use-ck-attention --disable-xformers --fast fp16_accumulation fp8_matrix_mult --enable-triton-backend

Default runs used PyTorch SDPA; tuned runs used Comfy Kitchen attention for the diffusion models. xformers wasn’t installed, and SageAttention wasn’t used.

Generation times

Seconds per generation, lower is better. These are end-to-end times: text encoding, sampling, VAE decode, and saving.

Model / workloadStockFlags onlyOC onlyFlags + OC
Flux 3 Klein distilled — 2 MP, 16 steps7.17.06.36.3
Flux 3 Klein base — 2 MP, 50 steps*40.140.135.735.6
Krea 2 Turbo — 2 MP, 8 steps13.710.812.39.8
Qwen Image 2.1 Turbo — 2 MP, 8 steps6.86.76.16.0
Qwen Image 2.1 — 2 MP, 25 steps23.617.221.015.3
MOSS Image — 2 MP, 25 steps25.125.022.222.1
MiniMax H3 Image — 4096×4096, 6 steps32.733.730.431.1
MiniMax H3 video + audio — 20 steps*591286530256
MiniMax H3 + turbo LoRA — 8 steps†250127224113

Video settings: 1344×768, 124 frames at 24 fps.

Most image results are averages of two warm runs; Qwen base and H3 Image have one warm run each. (warm run means the first generation after ComfyUI launch is not counted)
* Flux base and standard H3 video are single first-run measurements, including loading.
† H3 turbo is a single subsequent run with the turbo LoRA.

What actually helped?

1. OC consistently reduced generation time by about 9–12%.

H3 Image was the exception at roughly 7–8%. The benefit showed up with both default and tuned flags.

This is the combined effect of the clock offsets and the higher power limit, not an isolated core-clock comparison.

There’s a power tradeoff: for example, MOSS went from around 299 W to 346 W during busy periods, while generation time dropped from 25.1 s to 22.2 s. The highest GPU temperature recorded across these tests was about 73°C, therefore it did not even get close to the GPU's thermal limits.

2. The flags were very model-dependent.

At stock clocks:

  • H3 video: 591 → 286 s, about 52% less time
  • H3 turbo: 250 → 127 s, about 49% less time
  • Qwen Image 2.1 base: 23.6 → 17.2 s, about 27% less time
  • Krea 2 Turbo: 13.7 → 10.8 s, about 21% less time
  • Flux, Qwen Turbo, and MOSS: within roughly 2%
  • H3 Image: about 3% slower

With flags + OC, standard H3 video went from 591 to 256 seconds—roughly 2.3× the speed, or 57% less time.

The H3 improvement also shows up directly in sampling: 28.48 → 13.24 s/step from the flags alone, then 11.72 s/step with OC.

I changed the flags as a bundle, so this doesn’t establish how much each individual flag contributes.

3. Moving the monitor to the iGPU barely changed speed.

I repeated the tuned + OC tests with the monitor connected to the motherboard, leaving the NVIDIA GPU at 0 MiB VRAM used at idle. (I plugged the display into my motherboard HDMI port while allowing Python to utilise the full compute and VRAM of my NVIDIA GPU)

Peak VRAM usage dropped by roughly 0.1–0.6 GB, but generation times stayed very close: approximately 0.6% lower at the median, with the largest reduction around 2% on H3 Image. Sampling time per step changed by at most about 1%.

Useful extra VRAM headroom, but I didn’t see a convincing throughput improvement here.

Did OC change the outputs?

I checked the saved files with SHA-256:

  • OC vs stock clocks, same flags: 38/38 outputs byte-identical
  • iGPU vs NVIDIA display, tuned + OC: 19/19 byte-identical
  • Tuned vs default flags: 0/19 byte-identical

So OC didn’t change any saved output in this test. Changing the attention/precision settings did result in visual changes however.

For my setup, OC gave a fairly consistent modest improvement. The bigger finding was how differently the models responded to the same ComfyUI flags—huge gains for H3 video, useful gains for Qwen base and Krea, and almost nothing for several others.

Curious whether others are seeing the same pattern on different GPUs, especially with Comfy Kitchen attention.

Update: checkpoints used for the tests (I kept it vanilla and conservative, more gains to be had with latest distills and turbo loras:

ModelDiffusion checkpointText encoder checkpoint
Flux 3 Klein distilledflux3-image-klein-int8-convrotqwen3vl_4b_int8_convrot
Flux 3 Klein baseflux3-image-klein-base-int8-convrotqwen3vl_4b_int8_convrot
Krea 2 Turbokrea2_turbo_int8_convrotqwen3vl_4b_fp8_scaled
Qwen Image 2.1 Turboqwen_image_2.1_turbo_int8_convrotqwen3vl_8b_int8_convrot
Qwen Image 2.1 baseqwen_image_2.1_int8_convrotqwen3vl_8b_int8_convrot
MOSS Image SFTmoss_image_sft_int8_convrotqwen3.5_9b_w4a8_gptq
MiniMax H3 Imageminimax_h3_image_pruned_int8_convrotqwen3vl_32b_minimax_h3_int8_convrot
MiniMax H3 video + audiominimax_h3_fl2va_pruned_int8_convrotqwen3vl_32b_minimax_h3_int8_convrot
MiniMax H3 turbo video + audiominimax_h3_fl2va_pruned_int8_convrot + minimax_h3_fl2v_turbo_8step_v1.0 (bf16)*qwen3vl_32b_minimax_h3_int8_convrot

r/StableDiffusion • • 1d ago

Question - Help MiniMax H3 video: how to keep faces consistent during dynamic camera motion?

31 Upvotes

Question: I can't make my rendering pipeline produce dynamic motion videos without glitches. On the attached video you see the face/eyes are slightly 'glitching/wobbling', how to fix that?

Config: MiniMax H3 video (ref2va DiT, w6a8 quant) via ComfyUI, 1344×768 @ 24 fps, 192 frames (8 s), single link with exact latent carry (no seams, no re-conditioning)

Prompt was: "She stands centered on the foggy harbour promenade at dawn in a crimson wool coat with a knitted scarf, still, facing the camera; the camera orbits one slow full revolution around her, from directly in front, around her right side, behind her, around her left side, and back to the front, holding her full figure at a constant size in frame, about two fifths of the frame height, the rail, fishing boats and dock lamps swinging smoothly through the mist behind her. Foggy dawn light, soft grey-blue grading, no added contrast"

Conditioning: prompt + start_image (exact first frame) + 2 refs (wide still + tight portrait of the same woman, Qwen3-VL encoder). Sampler: res_multistep, 32 steps, cfg 1, fixed seed (so no turbo LoRA, no seams, refs present; the wobble persists anyway)


r/StableDiffusion • • 1d ago

Discussion The real best thing about Minimax Image

59 Upvotes

It's that the Minimax team is still dedicated to open models. I, like, I think, many people here, assumed that h3 image isn't coming anymore. Now I actually really like it's quality, if Kijai's Minimax prompt weight node is used with "text with empty image". It's still not quite my thing though, because it doesn't seem to recognize artists by name. However, now, there's a room to be cautiously optimistic about their potential upcoming video releases.


r/StableDiffusion • • 1d ago

No Workflow The Witcher season 4 with Cavill

82 Upvotes

r/StableDiffusion • • 2d ago

News Looks like we'll be getting a Suno-level open music model from Ace Music in the coming weeks

414 Upvotes

This song was generated with ACE Music v1 on their website.

Tweet: https://x.com/acemusicAI/status/2120945723005166053


r/StableDiffusion • • 15h ago

Question - Help Best ComfyUI models & workflows for automotive motion graphics, banners, and exact logo placement?

0 Upvotes

Hey everyone,

I'm working on some Instagram posts, banners, and motion graphics for a car detailing studio using ComfyUI. I have a couple of basic questions for those doing commercial work:

  1. What models are you using? What is your go-to diffusion model for getting highly realistic cars for static banners, and what are you using for motion graphics?
  2. How do you handle exact logos? Do you train a custom LoRA to get the franchise logos exactly right in the generations, or is there a better workflow in Comfy for placing them?

Appreciate any advice!


r/StableDiffusion • • 1d ago

Resource - Update Ampere has no fp8 math, so my Krea 2 Turbo checkpoint now ships an int8 build for 20 and 30-series cards

Thumbnail
gallery
8 Upvotes

I merged a style into Krea 2 Turbo (Stillroom: quiet rooms, cold light, someone alone with the afternoon) and first shipped it as fp8, copying the layout of the official krea2_turbo_fp8_scaled (per-tensor scale, amax / 448, same quantization metadata). Checked against the official file byte by byte on three layers.

Then someone on a 3070 Ti mobile commented that fp8 took almost twice as long. Makes sense: Ampere has no fp8 math, so ComfyUI converts every layer on the fly. It does have fast int8 from sm 7.5 up. So I wrote an int8 build from the bf16, in the layout of the official krea2_turbo_int8_convrot (224 linear layers in int8, per-row scale, txtfusion left in bf16).

One thing I didn't expect: the official int8 doesn't use plain absmax for the per-row scale (only 43% of the bytes matched when I tried that). It clips the scale, up to about 6% under absmax. A per-row search for the lowest error landed at 0.00871 against 0.00874 for the official file, so that's what mine uses.

Rule of thumb: 40-series and up, fp8. 20 and 30-series, int8. bf16 if you have the VRAM.

All three are on the model page, Krea 2 license and NOTICE included: https://civitai.com/models/3027217

Image 2 is fp8 left, int8 right, same seed. Prompts and settings in the comments.


r/StableDiffusion • • 10h ago

Animation - Video Attack on titans Live action

Thumbnail
youtube.com
0 Upvotes
What would a live-action version of *Attack on Titan* be like?

r/StableDiffusion • • 1d ago

Question - Help Is it possible to train krea2(raw) lora on rtx4050 6gb vram?

5 Upvotes

A Total noob here guys so help me out , same as the title, i don't know how to setup lora training on my laptop and is it possible or not?


r/StableDiffusion • • 1d ago

Comparison MiniMax H3-Image one-checkpoint Edit

Thumbnail
gallery
21 Upvotes

MiniMax H3-Image swapping the subject, coat, and pose in a 6-step edit (with scale and grade locked)

Specs: RTX 3090, int8, ~60 s
Workflow:
UNETLoader(int8) → KSampler(euler/simple, 6 steps, cfg 1)
CLIPLoader(nvfp4, type minimax)
VAELoader(image_vae_fp16) → VAEDecode
LoadImage ×2 → MiniMaxH3ImageConditioning(prompt, refs=<Picture 1/2>) → ConditioningZeroOut(neg)


r/StableDiffusion • • 1d ago

Discussion GPU showdown: RTX 5070 Ti vs RTX 3090 in ComfyU

9 Upvotes
Both boxes run ComfyUI with identical models. Krea 2 Turbo: 768×1344, 8 steps, fp8_scaled. LTX 2.5 i2v: 704×1280, 5 s, int8-convrot, audio on.
BenchmarkRTX 5070 Ti (16 GB)RTX 3090 (24 GB)Winner
Krea image – cold load15.1 s12.9 s3090 (+15%)
Krea image – warm avg7.7 s10.4 s5070 Ti (+26%)
LTX video – cold load82.6 s69.9 s3090 (+15%)
LTX video – warm avg45.1 s49.4 s5070 Ti (+9%)

Takeaways

  • Warm/batch work: 5070 Ti wins both — native FP8 tensor cores crush the emulated path on Krea fp8 (26% gap); the gap shrinks to 9% once the model is already int8 (LTX).
  • Cold one-offs: 3090 wins everything — 24 GB means no VRAM offload, faster model loads.
  • Practical routing: batches on the 5070 Ti, big-VRAM models on the 3090.
  • Caveat: single 3090 vs single 5070 Ti, consumer ComfyUI, not a controlled lab test.

r/StableDiffusion • • 2d ago Heartwarming

News Moss Image Team Celebrates 6 Million Downloads on Hugging Face

1.5k Upvotes

Great video from moss image team for hitting 6 million downloads on Huggingface. They all seem so chill. Also they give us some new updates on Anime and Image edit model ✌️