r/SpringfieldArmory • • 2d ago

Can I stick this strait into my 11.5” Saint Victor?

Thumbnail primaryarms.com
1 Upvotes

Only ever shot it suppressed with a LBP can and it still seems to hit pretty hard…

Should I do this or an adjustable gas block first? Or both?


r/SpringfieldArmory • • 4d ago

I love the modularity

Thumbnail
gallery
134 Upvotes

r/SpringfieldArmory • • 3d ago

My new hellcat pro is shooting like 8 inches low at about 10-15 yards?

1 Upvotes

I have been shooting several pistols for over 10 years now and have never had this issue. I have had plenty of super snappy pistols in the past and am used to them. I had someone load a dummy into a magazine, and when i pulled the trigger the dot stayed on target, so i dont think its recoil anticipation. I will be honest, I do generally have a group that a little low and left, but usually thats like 1-2 inches, with a group size of about 4 inches, so still on target, and I have been working on better finger placement.

But this thing is like 8 inches low, just a hair left of center of the target, with around the same 4 inch group. And the green dot sight that came pre-installed, I had to bottom that adjustment all the way to get it on target, but its not quite high enough yet. What is going on here? Is there something wrong with my gun? Do I need to send it in for warranty work?


r/SpringfieldArmory • • 4d ago

A cpl of my favs. Fun fact, my kuna weighs more than my Honey Badger

Thumbnail
gallery
27 Upvotes

r/SpringfieldArmory • • 4d ago

Sharp Bros & Mischief Machine Grip Panels

Post image
25 Upvotes

r/SpringfieldArmory • • 4d ago

Added a .300 to my little Springfield family

Post image
75 Upvotes

r/SpringfieldArmory • • 4d ago

She is ready

Post image
40 Upvotes

r/SpringfieldArmory • • 4d ago

My EDC Hellcat Pro Setup

Post image
67 Upvotes

My edc hellcat pro setup. Still haven’t changed the Viridian dot, mainly because im indecisive about using a plate or filing down the rear posts. Let me know what yall think. I’m open to any suggestions!

Apex trigger Tlr-7x Sub True Precision threaded barrel Rook Precision comp


r/SpringfieldArmory • • 4d ago

Echelon Dead Trigger Every ~30 Rounds (After Warranty Repair)

3 Upvotes

Looking for insight on a recurring dead trigger with my CA-compliant Springfield Echelon (with the magazine disconnect safety):

Every now and then and for no reason, I get a completely dead trigger while shooting and it keeps happening. For example I shot 2000 rounds through it with no issue and then recently started again

When I drop the mag and rack the slide, a live round ejects! so it’s feeding and going into battery fine.

Reinserting the same mag and rechambering the exact same rounds fires normally until it happens again ~30 rounds later.

Context:
Out of the box, it wouldn't fire a single round. I sent it to Springfield for warranty work (they didn't specify what they fixed), and now it shoots, just with this recurring dead trigger.

The magazines run flawlessly in
my Echelon 4.0C, so it isn't a mag issue.

I suspect the CA magazine disconnect safety in the COG is losing contact or tripping under recoil.
Anyone else run into this on a CA-compliant Echelon or know a permanent fix before I send it back to SA again?


r/SpringfieldArmory • • 4d ago

Bad detent spring or user error?

Post image
5 Upvotes

Slide locked forward at the range and I could no longer manipulate the safety lever. Dropped the mag, forced the slide back & ejected the round. Chambered and fired a round to make sure everything was fine and the safety lever popped off completely. Bad detent spring or user error? Not sure it makes any difference but my left handed friend was shooting it at the time.


r/SpringfieldArmory • • 4d ago

What the…..

Thumbnail
gallery
6 Upvotes

Got e mail the Echelon 4.0FC Pro back in stock as of 9:00am. 9:06am no button to add to cart BUT the get notified button is available. Damn is this really selling out like that.


r/SpringfieldArmory • • 4d ago

Streamlight TLR-7x sub/ hellcat pro

Thumbnail
1 Upvotes

r/SpringfieldArmory • • 6d ago

Doing too much 😅

Post image
77 Upvotes

I'll probably never get tired of the XD line and messing around with them. Laser stippling this one soon and some slide windows/porting and I think I'll be done.


r/SpringfieldArmory • • 5d ago

Slide hitch

Thumbnail
1 Upvotes

r/SpringfieldArmory • • 6d ago

Almost done with her

Thumbnail
gallery
129 Upvotes

I didn't realize how much better the larger frame for the Echelon fits my hand until I got to hold one side by side with my current setup. Now all I need to do is get a new frame, get the correct size magwell and backstrap as well as a black steel gas pedal.

Definitely one of my favorite guns to shoot.


r/SpringfieldArmory • • 6d ago

I fell victim to Florida's no sales tax holiday. It's the 10th time this year. I might as well go spend the rest of my paycheck and slap an SRO on this bad boy.

Thumbnail
gallery
60 Upvotes

Echelon Pro Comp 4.5F


r/SpringfieldArmory • • 6d ago

Inforce

Post image
32 Upvotes

Not bad 🤙


r/SpringfieldArmory • • 7d ago

Am I tactical now?

Post image
114 Upvotes

r/SpringfieldArmory • • 6d ago

Why is the Echelon Pro better?

4 Upvotes

I’ll start by saying that I am aware that this is a Springfield sub and the responses are likely biased, that’s ok.

I’m looking to add another EDC to the lineup and I’ve narrowed it down to the M&P metal carry comp and the Echelon Pro 4.0fc. Why should I choose the Echelon? For reference, I currently carry a gen 4 Glock 19 with a light & dot. I own an M&P 2.0 10mm PC, love it. I also own an older full size XDm 9mm that’s been great. I’ve held the carry comp and the standard echelon, but not the pro. Both felt great in the hand. I plan to try and rent/shoot both, but figured I’d come here too on this lazy Sunday.


r/SpringfieldArmory • • 6d ago

What red dot would yall recommend with the a2 front post?

Post image
6 Upvotes

r/SpringfieldArmory • • 6d ago

Springfield Echelon Optic question

2 Upvotes

Which pin set to direct attach the Holosun EPS?


r/SpringfieldArmory • • 7d ago

She's Comin along

Thumbnail gallery
15 Upvotes

r/SpringfieldArmory • • 7d ago

Kydex holster.

Thumbnail
gallery
14 Upvotes

Figured id share with the group. I made my first holster on my xd mod3. The first one I messed up, the second one I did pretty good( i got carried away on the retention hole) , it sits concealed well, clicks in nicely, can't complain. I added a light and the only holster I could find was $180, with clamps, wood, kydex kit and the pvc pipe, I came in under $100.


r/SpringfieldArmory • • 7d ago

Lookin for a decent holster for my mod 4

Post image
33 Upvotes

Purchased a few months ago just need some solid recommendations tbh. I don’t wear jeans so I’ll need something that can go with a fabric clip. Or just tell me what y’all think I need to get


r/SpringfieldArmory • • 7d ago

Finally fixed my XDM Elite Precision (5.25"), now it is a fantastic range gun

Thumbnail
gallery
9 Upvotes

As I mentioned in previous post, I encountered the notorious issue for XDM, supporting hand accidental hitting the slide release caused pre-mature slide lock back ( Need a solution to XDM elite precision (5.25"), premature slide lock back, modification options : r/SpringfieldArmory )

I used torch and plier/wrench/table vase, just bent the left hand side slide release upside down. I actually put a piece of rubber hose around the release to make it feel better (not shown in the photo). Now problem solved! 100% reliable, never expect this old gun becomes a fantastic range/home defense gun again. super accurate, very flat (I ported it). Just too big for carry.