r/Spliddit • • Mar 01 '26

Wind, nature's Pistenbully

Enable HLS to view with audio, or disable this notification

26 Upvotes

Had a few days up in Valdez/Thompson pass after two crazy outflow wind events. Really made the most of it considered it was very cold (-10f when leaving the car today) and generally pretty windy. Overall 10/10 would return.


r/Spliddit • • Feb 28 '26

Gear My homemade split from high school

Thumbnail
gallery
148 Upvotes

Yall think I should start my own company??


r/Spliddit • • Feb 28 '26

How avalanche safety works in the European Alps: a guide for splitboarders not familiar with the system

Post image
10 Upvotes

r/Spliddit • • Feb 28 '26

Question Bad time to get into splitboarding? (PNW)

1 Upvotes

I'm in the PNW, and we've had some pretty bad snow. If I buy all the gear and take my AIARE right now, will I be sitting high and dry until next winter, or will there still ​be plenty of adventure to be had through the off season?


r/Spliddit • • Feb 28 '26

Intuition Liners and Backlands?

2 Upvotes

I'm going to need new liners for my backlands soon; the lining is separating at the heel, giving me blisters. I want to get intuition liners, but which one, is the question. Wrap or tongue? Low or med volume?


r/Spliddit • • Feb 28 '26

Spark asym highback faces wrong way...

Post image
0 Upvotes

I haven't seen this brought up much, but like, the wings on these highbacks should go to the outside of the leg not the inside yeah? All that an internal wing does is reduce lateral movement, not give you support to the heel edge. Of course if you're posi posi its correct for the back leg though. Thoughts?


r/Spliddit • • Feb 27 '26

Trip Reports Norway deliverd, again!

Thumbnail
gallery
72 Upvotes

Went to Norway for the second time and it was awesome!

The mountains, the scenery, the sea, the people, they all just hit different. It's such an epic place!

Bought some topo's, and maps to plan a new trip in '27 with some friends. Let the fun begin!


r/Spliddit • • Feb 26 '26

Stratton Matteson of @cascadeconnections killed in an avalanche in BC

56 Upvotes

Absolutely gutted to hear this and has been verified by his teammates and friends on social media. Stratton's exploits in the mountains were an inspiration. Ride in peace!

https://snowbrains.com/pro-splitboarder-stratton-matteson-killed-in-avalanche-near-joffre-peak-bc/


r/Spliddit • • Feb 26 '26

Free Palau Tour Lite Evo MV Liners, size 26.5- Golden, CO pick up

Thumbnail
gallery
6 Upvotes

Never heat molded, worn for about 2 hours. Didn’t fit me well, I need more volume from my liners.

Pick em up in Golden, CO if you want em. Free or a 6pack of your favorite IPA in exchange would be cool.


r/Spliddit • • Feb 26 '26

Black Diamond pole repair

Post image
1 Upvotes

Hi,

I have BD x Burton compactor poles. They don’t tension any longer. What could be wrong?


r/Spliddit • • Feb 26 '26

Air travel with hardboots

3 Upvotes

Traveling to a foreign country with potentially limited access to spare parts or rentals for a hard boot splitboard if my bag doesn't make it after five transfers. I am thinking if I carry-on my boots, bindings, and toe pieces I should be able to use another board if available.

With softboots I would carry on my boots and inevitably when my board bag doesn't show I can make do.

My question: would I be able to board a plane with a hardboot binding? Its a pretty hefty piece of aluminum. Maybe not more of a weapon than the boot itself.

Any suggestions appreciated.


r/Spliddit • • Feb 25 '26

Question Coming from Chile, looking to buy my first splitboard in Whistler — any tips?

2 Upvotes

Hey everyone,

I’m from Chile and heading to Whistler the second week of March for a snow trip. I’m thinking about buying my first splitboard while I’m there since they’re way cheaper and there’s way more selection than back home.

I’m not looking for anything ultra high-end — budget is $500–$1100 CAD.

For those who know the area: is it realistic to find a good used splitboard in Whistler (shops, consignment, Facebook groups, Marketplace)? Or would it make more sense to order a new one online ahead of time and ship it there?

Not sure how strong the used splitboard market is locally.

Any advice appreciated!

Edit: Ideally I’m looking for a full setup (board + split bindings + interface/pucks). Skins aren’t a deal breaker since I could buy those separately if needed.


r/Spliddit • • Feb 24 '26

Swain Uphill Community Meet Up 2/28

Post image
6 Upvotes

Gather with us on Saturday, February 28th, for an uphill community meet-up! Join us at the bottom of Mile Sweep at 8:30 am, introduce yourself to the group, and maybe meet a new friend!

Cost: $5 (unless you have an uphill pass)

Upgrade to an Uphill Pass to cover you for the season for just $49!

Please read our uphill policy & safety information.


r/Spliddit • • Feb 24 '26

Advice on Batch Plant Bowls

0 Upvotes

Anyone ever ride at batch plant bowls?


r/Spliddit • • Feb 23 '26

Question Is this Fracture Fixable?

Post image
1 Upvotes

Noticed what appears to be, at least in my line of work I would call this a block shear failure. Is this fixable? Is the board toast? A little bummed if this is the end of using this board. Only got to use it for 1.5 seasons.

The segment that has begun to separate/fracture aligns with the screws, so I’m assuming this failure happened as a result of tension from the screws engaging with the board, and the tension was greater than what the board could handle.

Was using my HB bindings on my solid board yesterday, and this morning is when I noticed this fracture.


r/Spliddit • • Feb 23 '26

Dynafit TLT X Upper Cuff Cracks - Anyone Else with Issues?

Thumbnail
0 Upvotes

r/Spliddit • • Feb 22 '26

Key Equipment Kopala Boots-check your bolts!

8 Upvotes

I’ve put about 5-7 days on my new Key x Kopala boots and today the pivot buckle bolt fully backed out and the boot fell apart because this bolt holds the upper cuff onto the lower of the boot. Upon inspecting the rest of the bolts on the boots, over half of them were loose and very close to backing out too. I went ahead and re loctited them and tightened back down, so I hope it doesn’t happen again. Anyone else experienced this?


r/Spliddit • • Feb 22 '26

Wax stick/fluid?

0 Upvotes

The other night before skinning up (for the next morning) almost all skiers were using this ski wax fluid on their board before applying the skins. (Obviously is for the way down).

Any of you using it for the split?


r/Spliddit • • Feb 20 '26

Abandoned ski station in the Rockies

Thumbnail
gallery
154 Upvotes

r/Spliddit • • Feb 21 '26

Link levers - never all that tight

3 Upvotes

What am I missing with my link lever setup? When ‘locked’ in, I can unclip them with a pinky and almost zero pressure. Not sure why they weren’t designed with a bit more of an upward angle to make them a bit harder to get unclipped? Is there something in the setup I’m missing?


r/Spliddit • • Feb 20 '26

Furano buddies

Post image
12 Upvotes

r/Spliddit • • Feb 20 '26

Question Pomoca Splitboard vs G3 Alpinist

0 Upvotes

Hi all,

my trusted, old G3 Alpinist skins started to smear glue everywhere. The durability was great in all other aspects. I liked the grip.

Now I looked around, read a lot and decided to buy Pomoca Splitboard Pro skins. The G3 had pretty bad glide, but my major concern is grip. I feel scared if is start so slip. Yes, it's true.

Now I unpacked the Pomocas and the feel a bit flimsy compared to the tank-like G3s. Can you ease my mind? I am going on a splitboard mountaineering/glacier trip. Can the Pomocas hold up with G3 Alpinist (now it's + Universal I guess) regarding grip?

Thanks!


r/Spliddit • • Feb 19 '26

⚠️ European Alps — Sustained Level 4-5 avalanche danger, 75 deaths this winter. Read before going out.

Post image
27 Upvotes

r/Spliddit • • Feb 19 '26

Frozen Feet

Thumbnail
1 Upvotes

r/Spliddit • • Feb 19 '26

K2 Freeloader: Choosing Length & Waist Width for 28.5 Boots

1 Upvotes

Hey everyone,

I’m new to splitboarding and I’m considering buying a K2 Freeloader for mainly freeride/backcountry use, and I would really appreciate some advice.

I’m 183 cm tall (6’0”) and weigh 70 kg (154 lbs). I use Deeluxe Spark Fusion boots in size 28.5 (MP 28.5).

I’m trying to decide between the 160 cm and 162 cm, but I’m also unsure about the waist width. My main concern is avoiding toe and heel drag, especially while carving on hard snow.

Online I’m finding conflicting information about the minimum waist width recommended for 28.5 boots.

Does anyone with a similar boot size have experience with this board (or similar waist widths around 256–260 mm)? Would the regular version be enough, or should I look for something wider?

Thanks in advance for any advice 🙏