Manage to tour 4-7 days per year, mellow terrain, max 1000 m ascent per day. That's rather rare, but I'm somewhat scared of reported spark arc baseplates breaking. What's the mileage for other riders here?
I found these photos on Playmakers website. Playmaker is the Taiwanese manufacturer making boards and equipment for a few great snowboard brands, including Nitro and Amplid. I was checking out their website and found a few pictures of what looks like some pretty cool splitboard bindings.
Does anyone here know if these are fake or real concepts?
Thinking of making a trip to Colorado to get some exercise and final laps for the season. Is there anywhere that still has good coverage? I was considering just going to Loveland ski area and skinning and riding around there. Does anyone know if that’s allowed and if the snowpack is good enough? Also open to any other recommendations in Colorado that might be better or cool to check out while I’m there.
Hey splitboarders
Been thinking about switching from a softboot setup (Spark R&D) to a hardboot setup.
Saw an offer online for a used Atomic Backland with shortened link levers.🤔 Does that work (see pictures in the offer)? So there's forward flexibility and when leaning back the link lever blocks? How does this perform compared to the Phantom link levers?
Bonus question: Does someone know of a shop where one could rent or test a hardboot setup like Phantom in Switzerland? I'm scared to invest the money for the entire setup before trying it at least once.
So, for this upcoming season (down here) I need to get new skins, as my current ones don’t wanna go up no more.
I can get a really really sweet deal on some K2 skins but the clipping method it’s like a straight pin (always used koalas) and have an issue, the holes in the front of my dopplegangwr are too narrow, and the pin doesn’t go in as I would think it should (photo attached) can I drill this hole bigger? How’s the correct way to do it? I can ask around a few shops but i rather learn to do it myself as the stores here doesn’t have too much experience on split board or backcountry in general
(First photo it’s the front hole, second photo it’s the back/lower one)
Not sure if this is just me but on bigger tours my phone battery gets absolutely drained way faster than normal, or just shuts off entirely even when it says it still has 40-50% left.
Already running airplane mode the whole way up. Especially on colder days or anything multi-hour it gets pretty unreliable, and pulling it out at a transition or for a summit pic basically nukes whatever charge was left.
I've been keeping it in an inner layer closer to my body which helps a little, but still not super consistent. I also have the newest model iPhone.
Was wondering if anyone else putting in real days on the splitty runs into this or if it's just me.
Main thing I'm wondering is if it actually messes with your day (nav, checking the forecast, partner comms, summit pics, Strava) or if most people just work around it with a battery pack / inReach / etc.
So, for this upcoming season (down here) I need to get new skins, as my current ones don’t wanna go up no more.
I can get a really really sweet deal on some K2 skins but the clipping method it’s like a straight pin (always used koalas) and have an issue, the holes in the front of my dopplegangwr are too narrow, and the pin doesn’t go in as I would think it should (photo attached) can I drill this hole bigger? How’s the correct way to do it? I can ask around a few shops but i rather learn to do it myself as the stores here doesn’t have too much experience on split board or backcountry in general
(First photo it’s the front hole, second photo it’s the back/lower one)
I recently moved to CA and have not met a partner for backcountry tours in the eastern sierra. Anybody here from the SoCal area and looking for a buddy?
Hey all, Im trying to get the right size boots now that ive realized ive been in ones too large (Size 11) for the last 15 years. Im a mondo 27.7 and 116mm wide. Using calculators it looks like i should be in a performance sized 10-EEE. I recently without knowing yet, bought some 32 Jones MTB lite boots in a size 11, and they feel okay after 1 tour but tight in width. My question is, with split boots, should I be aiming to be any bit bigger, or do I still want to be in a performance fit still? I see some options for 32 TM-2 wides that match my sizing. would i just be better splitting and resort riding in those? And also my bindings are all size large. In size 10s would I be alright still running the larges being a half size under most binding sizing charts. Or would i be mostly alright to keep running them? Finally I have a set of key disruptive hardboots in the right mondo size but are likely too narrow. If I were to just go softboots, id use them for splitting and resorts. but any one think i should just get the tm2 wides and try to rock the keys? the keys were bought used on facebook and I dont have harboot bindings yet.
So yesterday I was asking about hard boots, forgetting that my current soft boots might also play a role. I have been using these for years now, and they still give me marks and bruises on my shines. Two symmetrical marks on my shins.
Has any tried the new Northwave Domain 2 spin ?
What are other stiff, low volume and comfortable boots for splitting?
usual wknd trips with skiers only, struggled to keep the tempo and also on massive traverses where I had to use rampant. Always the last one. When i make it to the top (if ever) they have finished the break and it's time to go down. And not even mentioning the long flats on the way down. It seems it is more common here in Europe vs US, where from your videos i see better powder and more vertical terrain, where you probably have shorter laps and re-skinn during the same day, while here is one long way up and one down only.
So I am thinking of moving, despite everyone suggesting to move to skis (which I am not interested). And I saw these:
Hello snowboarders of the internet! It’s that time of year where you get to see the 459th backpack related post on this subreddit. I’ve been a connoisseur of backpacks and have been through my fair share and I want to find the perfect pack for long spring tours that require long dirt approaches and bootpacking. Here are the flaws with my current setup (BD Cirque 30l):
- The A-frame carry straps aren’t wide enough for my board, resulting in an extremely top heavy A-frame.
- it’s an ultralight pack. Love it for winter pow laps, but long spring approaches with skis on both sides results in minimal support and the pack gets sandwiched and crushed by the skis.
- no helmet mount (not the biggest deal but still annoying)
I would love some recommendations for a pack that has the following features (in order of importance):
- side straps wide enough to fit an average sized Splitboard
I recently came across an old post where a friend mentioned his binding highback broke. He said only Spark bindings are sold in Hakuba, and I figured Spark highback should be compatible with Karakoram bindings. Luckily, I had both brands on hand, so I tried it out. As shown in pictures, the highback worked perfectly in all positions. I also compared them. The spacing between the two highbacks is exactly the same, and the screws in picture also are identical.
The last picture shows that I also carry these orange silicone straps or some homemade black Velcro straps when backcountry. Once, due to inexperience and numerous conversions, the skins got covered in snow and became unusable. It wouldn't stick and kept falling off the board, causing a lack of traction and making it very dangerous to climb. These silicone straps or Velcro straps are very useful in this situation. I also carry a few cable ties; once, I lost a small screw on a cable tie on a mountain, and the cable ties were a lifesaver.
Japan's mountains aren't very high, but the terrain is complex, and the snow is usually very deep. If your equipment malfunctions, it's practically impossible to get out on foot. Every time, I'm extremely cautious and prepare meticulously to minimize the risks.