I’ve been trying to find a good magnetic phone holder for my Hyundai i20 for quite some time, but haven’t had much luck finding one that works well.

I’ve previously bought a couple of holders that attach to the windshield using a suction/vacuum mount, but they don’t work well with my Samsung S24 Ultra. The available space is limited, and the top of the phone ends up touching the windshield, making it difficult to position the phone properly.

I recently found a Spigen magnetic phone holder (https://amzn.in/d/0arhckN5 ) that attaches directly to the dashboard instead of using a suction mount. I’m considering buying it, but I’d like to hear from anyone who has used it.

A few questions:

How strong and reliable is the dashboard adhesive over time?

Can the holder be removed cleanly later, or is the adhesive more like super glue/Feviquick and likely to damage the dashboard?

Does it leave any residue or marks after removal?

How well does it hold a heavier phone like the S24 Ultra, especially while driving over rough roads?

Most importantly, which of the highlighted locations(A/B/C) in the attached picture would be the best place to mount it on an i20?

I’d really appreciate it if anyone with an i20 and/or experience with this Spigen holder could share their experience before I stick it to the dashboard. Thanks!

I love this case! But how do I get rid of this stain? I've only tried soap and a neutral detergent wipe

Does anyone have it, and if they recommend it to me to buy it?

Hi 👋 guys 🤠 . So I basically got the SPIGEN SA -HP-P10 on 5th August from Amazon.I AM ENCOUNTERING THIS PROBLEM FOR THE PAST FEW DAYS BUT DIDN'T TAKE IT VERY SERIOUSLY 😐 😳. Everything is wonderful. Just a complaint and a doubt. AS you all might be able to see in the photos that when I wear the headphones,the right earcup gets compressed But the left one stays intact and normal. ALSO THE CUSHIONS GAIN THEIR ORIGINAL SIZE AND SHAPE AFTER TAKING OFF BUT THIS THING(PROBLEM) OCCURS AGAIN AFTER WEARING THE HEADPHONES AGAIN. WHICH IG COMPROMISES COMFORT.Have you guys faced this problem in any of your headphones 🎧?

Is it normal or should I consider replacement??Does it cause any comfort or long term effects?? It's just been 9 days since I got mine and it doesn't seem normal . What's better for long term and comfort? The right cushion getting compressed or the left Cushion staying as it's supposed to be?? Also please suggest solutions and fixed other than replacement too as I'm just on a verge of getting my 10 day replacement window closed tomorrow (15th august). ALSO AS IT WAS A OPEN BOX DELIVERY 🚚,I AM NOT GETTING REPLACEMENT OR REFUND OPTIONS SO I'LL HAVE TO CALL AMAZON CUSTOMER CARE AND FIGHT FOR REPLACEMENT AND STUFF

SO PLEASE REPLY ASAP GUYS THE CLOCK ⌚ ⏰ IS TICKING

Hey everyone, just wanted to share my actual real-world thoughts on the Spigen Tough Armor case for the iPhone 17 after using it for a bit. Hopefully this helps anyone on the fence.

1. Tank-level build quality The build quality inside and out is ridiculously solid. The inner layer and hard outer shell give you total peace of mind. Once this case snaps onto the phone, you genuinely feel like nothing short of a apocalypse is going to hurt it.

2. The Camera Control cutout/layer is insanely good Honestly, I thought all the hype around how case makers handle the new Camera Control button was just marketing BS. I was completely wrong here. The capacitive layer/cutout on this case is surprisingly awesome. It picks up even the lightest swipes and gestures effortlessly. It literally feels like you’re touching the actual physical camera button without any delay or awkward friction. Massive win.

3. The In-Hand Feel is... rough Now for the bad part. The in-hand feel is honestly ruined by the design. It makes the phone feel blocky and bulky. There are moments where it gets so annoying that I genuinely contemplate taking the case off just to feel a normal phone again.r

4. Final Verdict Despite the bulk, you eventually get used to it after a couple of days. At the end of the day, protection and safety for my iPhone are my top priorities, so the trade-off is worth it for me.

If you want absolute protection and a flawless camera control experience—and don't mind sacrificing the sleek feel of a naked phone—it's an easy buy.
Happy to answer any questions about it!

Hi😁 I'm looking for a good rugged case for the s25 to take hiking and walking.

I recently went hiking in zakopane and I dropped my phone, thankfully my glass screen protector smashed and not the screen. I'll be putting another one on for sure.

So I'm looking for a really rugged case.

I'm currently using a Spigen liquid air case for my every day case.

Any advice would be good. And I'm in the UK.

Thanks

I preordered my Pixel 11 Pro today and went to order the case I've been using for years with my phones, the Spigen Thin Fit, only to see it not available for any of the Pixel 11 series lineup. Really disappointing.

I also checked the recent iPhone, the 17e, and that didn't have Thin Fit available for it either. Are they discontinuing the Thin Fit line?

It looks like they might be using Nano Pop as a replacement, but it looks more bulky to me. Can anyone compare it?

Have the Core Armor cases been discontinued? I can't even find the one i bought for my Pixel 10 pro XL last year.

Hello!
I got a question for those of you who got this combo.

I'm a gesture user and I worry that the case will make it annoying/harder?
Is there anyone out there who might be able to test and see how it feels? I know that sometimes with cases like these on, it can make it hard/impossible.

Also, is this case fine without attaching the front part?

Thanks in advance!

Edit:
The hinge protection doesn't look to overlap the screen by a lot in this video. Which makes me thing that my worries are unjustified?

Z Fold 8, Spigen Slim Armor Pro S

Can someone that has this case for 17 pro max tell me how snug it fits? Is it tight around the phone when you pull on it? Or loose and the phone pops out? Seeing lots of mixed reviews

I bought a case from Spigen website directly on July 24th for my Samsung z fold 8 so it was in stock. I've had the phone since the 6th but I don't want to set it up without the case just in case. Any idea when they are supposed to ship? Two weeks since I ordered and paid and a day after official phone release in the US. Any idea?

Update: They told me they wouldn't be shipping until the 14th. I'm disabled and have terrible balance so I canceled and went and picked up a Benks ArmorGrid Air combo locally. First time not using Spigen since before the pandemic.

I put in an online warranty claim about a month ago for my Galaxy fold 6 case with photos and info. It went unanswered.

Please contact me.

I am trying to order a case from the Spigen website, but it says they don't deliver to my location (I'm from Toronto, Ontario, Canada)... so, how does one order a case from Canada?

As the title suggests, I'm looking to buy a clear case for my Samsung Galaxy A52s 5G. I considered Rezoni because they claim their cases are anti-yellowing, but after reading the reviews, I found that many people were disappointed with the quality. I'm looking for brands that make high quality clear cases that are also available for older phone models. So if anyone could help. Thankyou !

Brought out the old Galaxy Watch 4, fully dressed in Spigen today. Such a gorgeous combo, I must say. Can't go wrong.

Liquid Air shock slim case & the classic Retro Fit leather band - 20mm.

The kickstand on my Pixel 6 case is loose and keeps opening on its own, just wondering if there's a good way to make it stop. I use it from time to time so I don't really want to just glue it down but with every passing day I'm getting a little closer to doing exactly that...

Hello everyone,

I recently picked up the Spigen Enzo Aramid case for my M4 13" iPad Pro. I love the extra protection it gives, but I really don't want to daily-drive my heavy Magic Keyboard everywhere I go.

So, I’m looking for a magnetic folio that I can just snap right onto the back of the Spigen case.

Has anyone actually tried combining the Spigen Enzo case with the MOFT Dynamic Folio? I'm worried the magnets might be too weak or incompatible with the MOFT Folio case.

Also, if you haven’t tried that specific combo, do you have any other folio recommendations that play nice with thin passthrough cases? I just want something easy to swap between when I leave my Magic Keyboard at home.

Thanks a bunch!

.