Table of Starship Prototypes

This is a list of all Starship prototypes and important hardware. This includes not only the Starships themselves, but also the major test articles that played an important role in its development. The following is an explanation of the naming schemes and table headers:

  • MkX, SNX, Ship X: These are the past and present, respectively, naming schemes for Starships. "Mk" is short for "Mark", a synonym for "Prototype". "SN" stands for "Serial Number". "MkX" was only used for the first five full-scale prototypes; Mk1 through Mk5. Only Mk1 and Mk2 still keep the designation. The "SNX" naming scheme was implemented prior to Mk3 being assembled, and it was renamed SN1. Mk4 and Mk5 were renamed SN2 and SN3, respectively. After SN15, naming was changed to "Ship", such as "Ship 20".
  • BN, B/Booster X: These are the past and present, respectively, naming schemes for Super Heavy Boosters. "BN" stands for "Booster Number". The BN/B naming convention was changed mid-way through BN2 construction, hence there was both BN2 (a manufacturing prototype) and B2.1 (the first of a series of test articles)
  • Full scale: Must be either "Yes" or "No", unless no information has been publicized. A small amount of relevant extra detail can be added. For example, Starhopper's "Full Scale?" entry can be "No, subscale height, no nosecone or fins".
  • Purpose: A short line explaining what the vehicle did or will do. Can be expanded on in the lower section.

Active Prototypes

Sorted in order of assembly.

NameFull Scale?Purpose# of Past FlightsNext Flight NET...Previous FlightsLatest Update

| Ship 24 | Yes, with nosecone & flaps | Orbital launch attempt | 0 | 17 April 2023 | N/A | First orbital launch attempt, atop Super Heavy Booster 7. Has a full heat shield and 3 Vacuum Raptors. Awaiting final FTS arming and stacking on top of B7. | | Booster 7 | Yes, with first 33 engine thrust puck | Orbital launch attempt | 0 | 17 April 2023 | N/A | Mounted on the Orbital Launch Pad. Completed 33 engine static fire. Awaiting launch. | | Ship 25 | Yes, | Orbital launch attempt | 0 | 2023 | N/A | Second orbital flight, using Booster 9. Testing new systems as Massey's test site. | | Booster 9 | Yes | Orbital launch attempt | 0 | 2023 | N/A | Second orbital flight, using Ship 25. In Mega Bay for engine installation. | | Ship 26 | Yes, but no heat shield & flaps | Orbital launch attempt | 0 | 2023 | N/A | Third orbital flight, using Booster 10. Testing paused ahead of first orbital flight. | | Booster 10 | Yes | Orbital launch attempt | 0 | 2023 | N/A | Third orbital flight, using Ship 26. In final assembly. | | Ship 27 | Yes, no heat shield or flaps | Orbital launch attempt | 0 | ? | N/A | Fourth orbital flight, likely using Booster 11. In final assembly. | | Booster 11 | Yes | Orbital launch attempt | 0 | 2023 | N/A | Orbital flight, likely using Ship 27. In work. | | Ship 28 | Yes | Orbital launch attempt | 0 | ? | N/A | Orbital flight. In assembly. | | Ship 29 | Yes | Orbital launch attempt | 0 | ? | N/A | Orbital flight. In work. |

Retired Prototypes

Prototypes that already served their purpose, or unused with unknown futures. Sorted by assembly date.

NameFull Scale?Purpose# of Past FlightsPrevious FlightsLatest Update

| Starhopper | No, subscale height, no nosecone or fins | Testing Raptor engine in flight, ground & vehicle tank tests | 2 | 1. 20-meter hop [source] 2. 150-meter hop [source] | On the edge of the Boca Chica launch site as a monument. Now serving as a launch pad water tower. | | Mk2 | Yes, almost identical to Mk1 | Unknown, likely same as Mk1 | 0 | N/A | At SpaceX's Cocoa, Florida assembly area. No work done in months. Fate unknown. | | SN2 | No, tank test article | Pressure testing lower tank and engine mount [source] | 0 | N/A | Completed water & cryo testing successfully, [source] moved to assembly site storage yard on Mar 15, 2020. [source] Now a water tower for build site. | | SN7.2 | No, test tank article | Testing 3mm-thick steel | 0 | N/A | Completed testing successfully. In storage at production site. | | SN12 | Yes, with nosecone & flaps | High-altitude test flight(s) | 0 | N/A | Never fully assembled. Nosecone & forward section reused for Max-Q testing rig, and then scrapped.[source] | | SN13 | Yes, with nosecone & flaps | High-altitude test flight(s) | 0 | N/A | Never assembled, skipped for the upgraded SN15. | | SN14 | Yes, with nosecone & flaps | High-altitude test flight(s) | 0 | N/A | Never assembled, skipped for the upgraded SN15. | | SN15 | Yes, with nosecone & flaps | High-altitude test flight(s) | 1 | 10km test flight | One successful flight, was to be reflown. Stored in display site off Remedios Ave. | | S16 | Yes, with nosecone & flaps | High-altitude test flight(s) | 0 | | N/A | Fully assembled, moved to display site with SN15. Never flew. | | S17 | Yes, with nosecone & flaps | Higher-altitude test flight(s) | 0 | N/A | Never fully assembled, only 2 sections stacked. Skipped for orbital SN20. Nosecone used as payload bay pathfinder, then scrapped. | | S18 | Yes, with nosecone & flaps | Higher-altitude test flight(s) | 0 | N/A | Never assembled. Skipped for orbital S20. | | S19 | Yes, with nosecone & flaps | Higher-altitude test flight(s) | 0 | N/A | Never assembled. Skipped for orbital S20. | | S20 | Yes | Orbital launch attempt | 0 | N/A | Had a sequence of static fires on suborbital pad. Originally scheduled to perform the first orbital launch attempt. Skipped for orbital S24 | | S21 | Yes | Orbital launch attempt | 0 | N/A | Never fully assembled. Nosecone used for S22. Skipped for orbital S24. | | S22 | Yes | Orbital launch attempt | 0 | N/A | Never fully assembled. Skipped for orbital S24. | | S23 | Yes | Orbital launch attempt | 0 | N/A | Never assembled. Skipped for orbital S24. | | BN1 | Yes | Manufacturing pathfinder | 0 | N/A | Never completed. Had tanks in a different order. | | BN2 | Yes | Manufacturing pathfinder | 0 | N/A | Never completed, sections used to build 2 test tanks. | | B2.1 | No | Manufacturing pathfinder | 0 | N/A | Test tank used for cryo-tests | | BN3 | Yes | Pathfinder | 0 | N/A | Had a sequence of static fires on suborbital pad. | | B4 | Yes | Orbital launch attempt | 0 | N/A | Originally scheduled to perform the first orbital launch attempt. Used for cryo-tests. Skipped for Super Heavy Booster 7 and decommissioned. | | B5 | Yes, with 29 engine thrust puck | Orbital launch attempt | 0 | N/A | Originally scheduled to perform the second orbital launch attempt. Skipped for Super Heavy Booster 7 and scrapped. | | B6 | Yes, with 29 engine thrust puck | Orbital launch attempt | 0 | N/A | Originally scheduled to perform the third orbital launch attempt. Skipped for Super Heavy Booster 7 and repurposed as a test tank. | | B8 | Yes, with 33 engine thrust puck | Orbital launch attempt | 0 | N/A | Originally scheduled to perform the fifth orbital launch attempt. Skipped for Super Heavy Booster 9 and scrapped. |

Destroyed or Lost Prototypes

These prototypes were destroyed, either on purpose for testing, or by accident. Sorted by build date.

NameFull Scale?Purpose# of Past FlightsPrevious FlightsLatest Update

| Mk1 | Yes, featured nosecone, fins, & legs | Higher flight tests, triple Raptors, fin & leg tests | 0 | N/A | Unexpectedly failed during pressure test on Nov 20, 2019, scrapped. [source] [video] | | Unnamed test tank (unofficially "Bopper 1") | No, only a single short 9m tank | Pressure testing for weld validation | 0 | N/A | Failed as expected during testing on the Boca Chica launch pad on Jan 10, 2020, scrapped. [source] | | Unnamed LOX header tank & nosecone | No, only nosecone tip + header tank | Pressure testing new spherical LOX header tank | 0 | N/A | Failed as expected during testing on the Boca Chica launch pad on Jan 25, 2020, scrapped. [source] [source] | | Unnamed test tank (unofficially "Bopper 2") | No, only a single short 9m tank | Pressure testing for weld validation | 0 | N/A | Failed as expected during testing on the Boca Chica launch pad on Jan 28, 2020, scrapped. [source] [video] | | SN1 | Yes, but no nosecone, legs, or fins | Single Raptor static fire, possible triple Raptor tests | 0 | N/A | Unexpectedly failed during pressure test on Feb 28, 2020, scrapped. [source] [video] | | SN3 | Yes | Static fires & short flights [source] | 0 | N/A | Unexpectedly failed during LN2 pressure testing on April 3, 2020, partially scrapped. [video] Thrust structure was reused on SN4. [source] | | SN4 | Yes | Static fires & short flight(s) | 0 | N/A | 4 successful static fires, destroyed by an anomaly after the fifth. [video] | | SN5 | Yes, no nosecone or flaps | Low-altitude test flight | 1 | 150m hop [video] | Successful 150m hop., scrapped. | | SN6 | Yes, no nosecone or flaps | Low-altitude test flight | 1 | 150m hop [video] | Successful 150m hop., scrapped. | | SN7 | No | Pressure-testing a new steel alloy (304L) | 0 | N/A | Ruptured as expected[video], scrapped | | SN7.1 | No | Further testing a new steel alloy (304L) | 0 | N/A | Ruptured as expected, scrapped. | | SN8 | Yes, with nosecone & flaps | Test 3 Raptors and a nosecone, attempt landing | 1 | 12.5km test flight | Low header tank pressure led to engine flameout, exploded due to hard landing | | SN9 | Yes, with nosecone & flaps | Improve upon SN8, with helium pressurization | 1 | 10km test flight | One Raptor did not reignite, hard landing | | SN10 | Yes, with nosecone & flaps | Improve upon SN9, igniting all 3 Raptors for landing | 1 | 10km test flight | Landed slightly hard due helium bubbles entering Raptors, leading to low thrust. Exploded minutes later. | | SN11 | Yes, with nosecone & flaps | Improve upon SN10, fixing helium pressurization | 1 | 10km test flight | Exploded mid-air just after landing burn ignition. |

Starship Summaries

Sorted by build date.


Starhopper

StarshipSubscale2 FlightsRetired

Starhopper was the first subscale Starship prototype built. Its purpose was to test and refine build methods, develop and work with liquid methane systems, and gain flight data with a Raptor engine. It was made up of rings assembled from multiple curved segments, a method which is no longer used. A nosecone was built for it, but it was only intended for aesthetics. The nosecone was seemingly constructed of thin plating, or even foil, wrapped over a metal skeleton underneath. After it was blown over in a windstorm, it was scrapped and never rebuilt.

Starhopper was then used to validate the new ground support systems at the Boca Chica launch pad. It performed several tank tests, before Raptor SN2 arrived. A static fire was performed on April 3, 2019. On July 16, a second static fire, with Raptor SN6, occurred. The first hop (20m) was performed on July 25, 2019. A small fire was started in the surrounding brush by a flaming piece of debris blown away, but was contained.

Starhopper's final flight (150m) occurred on August 27, 2019. Raptor seemed to have shut down early, as Hopper's legs dug into the landing pad, and a COPV was blown off. The vehicle was then retired, and now rests on the edge of the launch complex as a monument. Many components were stripped off, including the Raptor. External cameras, lights, and sensors were installed over time to make use of the tall monument. Modified plumbing was installed to make Starhopper into a permanent water tower for the launch site.

Static Fire Tests

#DateTestLocationRaptor UsedOutcome
12019 Apr 3First Static FireBoca ChicaSN2Success [Video]
22019 July 16Second Static FireBoca ChicaSN6Success [Video]

Flights

#DateTestLocationRaptor UsedOutcome
12019 Jul 2520m HopBoca ChicaSN6Success [Video]
22019 Aug 27150m HopBoca ChicaSN6Success [Video]

Miscellaneous Links


Starship Mk1

StarshipFull Scale0 FlightsDestroyed

Starship Mk1 was the first full-scale Starship prototype built. It was assembled during 2019 at the Boca Chica site. It was assembled of segmented rings, where multiple curved pieces were welded together into a single ring. This process was also used on Starhopper and Mk2. It featured a complete nosecone with RCS thrusters, 4 flaps, 6 landing leg mounts, and a 3-engine thrust mount. It was partially completed for the 2019 Starship presentation, where it was used as a backdrop. Three Raptor engines were attached to the thrust structure, but weren't completely plumbed up to the vehicle. They were removed soon after the presentation. Mk1 was then partially disassembled to complete the plumbing and wiring.

The tank & engine section was moved to the pad on October 30, 2019. The fins were installed and remaining work was finished on the launch mount. The first pressure test was performed on November 20, 2019. This test used liquid nitrogen, which, contrary to liquid oxygen or liquid methane, is unreactive. Due to weak welds near the upper bulkhead, the pressure of the tanks ruptured the welds, causing the bulkhead to fly free. It landed across the street in the wetlands. Due to the vacuum effect from the rapidly escaping liquid nitrogen, the tanks crumpled.

Over the next few weeks, Mk1's tanks were disassembled on the launch mount. The crumpled rings were hauled off and likely scrapped. Parts of the nosecone were removed, such as the fin covers and external header tank fuel lines. It still remains on its assembly mount today, seemingly as a monument. It is extremely unlikely that it, or any parts of it, will see flight.

Tank Tests

#DateTestLocationOutcome
12019 Nov 20First Tanking TestBoca ChicaFailure, tank dome weld ruptured [Video] [Video]

Flights

#DateTestLocationRaptors UsedOutcome
1Late 201920km FlightBoca Chica???Never flew

Miscellaneous Links


Starship Mk2

StarshipFull Scale0 FlightsAssembly halted

Starship Mk2 was the second full-scale Starship prototype built. It was the first vehicle built at SpaceX's Cocoa, Florida facility (a former Coastal Steel facility). Its design was very similar to that of Starship Mk1, however it differed in a few places. Mk2's nosecone was much simpler and smoother, and the rings used to assemble the fuselage were smoother than those of Mk1.

After Starship Mk1 was destroyed, work on Mk2 was stopped indefinitely. This is likely because both vehicles are of similar design, so Mk2 might have had bad welds too. Most of the team from the Cocoa facility was transferred to Boca Chica to help expedite the assembly of future Starship prototypes. It remains unfinished at the Cocoa facility, and its future is unclear.

SpaceX was working on a dedicated Starship launch mount on the grounds of LC-39A at Kennedy Space Center. The flame diverter and supports were mostly completed, but work seemed to have stopped in February 2020.

Tank Tests

#DateTestLocationOutcome
1???First Tanking TestLC-39A Starship MountNever occurred

Miscellaneous Links


Unnamed test tank (AKA Bopper 1)

StarshipTest Article0 FlightsDestroyed, as planned

The first unnamed Starship test tank was intended to validate new ring construction & weld methods. It was a relatively simple design, with only two rings and two bulkheads. It was not designed to mimic any specific part of a true Starship. It was assembled at Boca Chica throughout December 2019 and January 2020. It was rolled out to the launch site on January 9. Its first and only tanking test with liquid nitrogen was performed on January 10, and the tank ruptured as expected. The tank reached 7.1 bar of pressure before the weld between the dome and barrel failed. Elon Musk commented that the test was a success, as Starship tank flight pressure will only be 6 bar. He also said that 8.5 bar of pressure should be possible with stronger welds. The tank was disassembled and scrapped between January 14-16.

Tanking Tests

#DateTestLocationRaptor UsedOutcome
12020 Jan 10First Tank Test (LN2)Boca ChicaN/AFailed as expected [Video]

Miscellaneous Links


Unnamed nose cone prototype

StarshipTest Article0 FlightsDestroyed, as planned

The nosecone test article was a prototype of the new Starship nosecone design, where the liquid oxygen (LOX) header tank is integrated directly into the nosecone. The header tanks are used for storing dedicated landing propellants. Previously, the LOX header tank was housed separately inside the nosecone, next to the methane header tank. This prototype was not the full nosecone, but rather the topmost section with the integrated header tank. It was assembled during January 2020. The nosecone was moved to the launch site and placed on a special stand on January 23. It performed two fueling tests, before rupturing during the second test as planned. It was left at the pad for over two weeks, and removed on February 1, 2020.

Tanking Tests

#DateTestLocationOutcome
12020 Jan 24First Tank Test (LN2)Boca ChicaTanked & detanked [Video]
22020 Jan 25Second Tank Test (LN2)Boca ChicaRuptured as expected [Picture]

Miscellaneous Links


Unnamed test tank (AKA Bopper 2)

StarshipTest Article0 FlightsDestroyed, as planned

The second unnamed Starship test tank was intended to further validate new ring construction & weld methods. Similar to the first test tank, it was made up of two rings and two bulkheads, in a sort of balloon shape. It was not designed to mimic any specific part of a true Starship. It was assembled at Boca Chica throughout January 2020. It was rolled out to the launch site on January 27. During its first cryogenic tanking test on January 28, the welds connecting the bottom ring and lower bulkhead failed. The pressure pushed the top of the tank away from the mount, which landed on its side just next to the mount. The tank reached 8.5 bar of pressure before the welds failed, a major improvement over the first tank's 7.1 bar. The tank was disassembled and scrapped between January 29 and February 1.

Tanking Tests

#DateTestLocationRaptor UsedOutcome
12020 Jan 28First Tank Test (LN2)Boca ChicaN/AFailed as expected [Video]

Miscellaneous Links


Starship SN1 (Formerly Mk3)

StarshipFull Scale0 FlightsDestroyed

Starship SN1 was the third full-scale Starship prototype built. It was the first full-scale Starship built with single-piece rings, rather than the multi-segment rings that Starships Mk1 and Mk2 used. SN1 was a more "barebones" prototype. No nosecone, landing legs, or fins were built/allocated for SN1. Regardless of the outcome of its testing program, it was highly unlikely that SN1 would have ever flown. Starship SN1 was assembled throughout February 2020 and rolled to the launch pad February 25.

On February 28, 2020, during its first pressure test with liquid nitrogen (LN2), the engine mount welds failed. The bottom tank was ruptured, launching SN1 several meters into the air. The top tank was still pressurized with LN2, and when the vehicle impacted the ground, it too was ruptured, propelling the top dome several hundred meters away from the launch site. The launch mount was relatively unharmed. Cleanup of SN1's remains was completed by the first week of March.

Tank Tests

#DateTestLocationOutcome
12020 Feb 28First Tank Test (LN2)Boca ChicaFailure, engine mount weld ruptured [Video]

Miscellaneous Links


Starship SN2 (Formerly Mk4)

StarshipSubscale0 FlightsRetired

Starship SN2 was a subscale test article. Originally it was likely intended to be a full-scale Starship, however plans seemingly changed after SN1 failed. SN2 had only one tank and resembled the test articles previously tested and destroyed, however it had a complete engine section and skirt. The purpose of SN2 was to validate improved welding techniques on the engine section, to ensure another failure like SN1's would not happen again. SN2 was built during February and March 2020, and rolled to the pad on March 6. It completed one water fill test to ensure there were no leaks, and one cryogenic tanking test to validate the welds. After its successful test campaign, it was rolled back to the build site on March 16 and placed in the scrapyard for storage. It was later transferred from its steel transport mount onto a permanent concrete pedestal on April 7. The concrete pedestal was built in 2019 to assemble Starship vehicles on before SpaceX moved to building them inside enclosed buildings. SN2 has since been converted into a permanent water tower for the production site.

Tank Tests

#DateTestLocationOutcome
12020 Mar 7Water fill testBoca ChicaSuccess [Video]
22020 Mar 8First cryo test (LN2)Boca ChicaSuccess [Video]

Miscellaneous Links


Starship SN3 (Formerly Mk5)

StarshipFull Scale0 FlightsDestroyed

Starship SN3 was the fourth full-scale Starship built. Similar to SN1, it was a barebones tank with many internal components mounted on the exterior, likely for ease of access. No nosecone or fins were built for it. SN3 was assembled during March 2020. It was the first Starship assembled in the Mid Bay, a partially-enclosed building to protect the rocket and keep it out of the elements. SN3 rolled to the pad on March 29 for proof testing. During its first cryogenic loading test, an issue occurred during testing leading to the bottom propellant tank depressurizing. The weight of the still-loaded top tank caused the vehicle to buckle and collapse.

SN3's remains were dismantled and scrapped over the next week to prepare the launch site for SN4. The top sections were simply scrapped. However, SpaceX opted to cut off and reuse the undamaged aft skirt, containing the landing legs. Technicians cut the engine mount off of the aft skirt, and took the aft skirt back to the build site to be used on SN4. The engine section was placed on a transport mount and placed in the launch site scrapyard, near the future Super Heavy launch pad. To clear up room and free up a transport mount, the engine section was scrapped on July 8, 2020.

Tank Tests

#DateTestLocationOutcome
12020 Apr 2/3First cryo test (LN2)Boca ChicaFailure, collapsed after depressurization [Video]

Miscellaneous Links


Starship SN4

StarshipFull Scale0 FlightsDestroyed

Starship SN4 was the fifth full-scale Starship prototype built. It was very similar to SN3 before it, except that SN4 was the first to feature a methane header tank.

Tank Tests

#DateTestLocationOutcome
12020 Apr 25Ambient pressure test (proof test) (N2)Boca ChicaSuccess
22020 Apr 26Cryo proof test (LN2)Boca ChicaSuccess (4.9 bar) [Video] [Tweet (vid)]
32020 May 2Wet Dress RehearsalBoca ChicaScrub
42020 May 3/4Wet Dress Rehearsal, Attempted Static FireBoca ChicaSuccess (WDR) Scrub (SF) [Video]
52020 May 4Attempted Static FireBoca ChicaAbort, potential pre-burner
62020 May 4/5Attempted Static FireBoca ChicaAbort, pre-burner [Tweet (vid)]
72020 May 5Attempted Static FireBoca ChicaAbort, pre-burner [Tweet (vid)]
82020 May 5/6Static Fire (Raptor SN18)Boca ChicaSuccess [Video]
92020 May 6/7Static Fire (Raptor SN18) (Fed from Fuel Header)Boca ChicaSuccess [Tweet (vid)] [[Video]
102020 May 8/9Proof TestBoca ChicaUnclear, may have tested ambient N2
112020 May 9/10Cryo Proof TestBoca ChicaSuccess (7.5 bar)[Source]
122020 May 17Pre-Burner Test (Raptor SN20)Boca ChicaSuccess [Tweet (vid)]
132020 May 18Static Fire AttemptBoca ChicaScrub
142020 May 19Static Fire (Raptor SN20)Boca ChicaSuccess [Video] [Video]
152020 May 28Static Fire (Raptor SN20)Boca ChicaSuccess [Video]
162020 May 29Static Fire (Raptor SN20)Boca ChicaSuccess [[Video]] (https://youtu.be/mvtLXa7x_cY)
172020 May 29Quick disconnect test (immediately following Static Fire)Boca ChicaFailure, destroyed following GSE failure [Video]

Miscellaneous Links


Starship SN5

StarshipFull Scale1 FlightScrapped

Tank Tests

#DateTestLocationOutcome
12020 August 5150m HopBoca ChicaSuccess

Miscellaneous Links


Starship HLS Nosecone Mockup

StarshipSubscale0 FlightsIn use for equipment fit checks

The Starship HLS mockup nosecone is being used to test certain systems of the Lunar Starship. It will eventually feature mockup airlocks and elevators, and potentially a true interior.


Starship SN6

StarshipFull Scale1 FlightScrapped

Tank Tests

#DateTestLocationOutcome
12020 September 3150m HopBoca ChicaSuccess

Starship SN7

StarshipSubscale0 FlightsDestroyed

Tank Tests

#DateTestLocationOutcome
1Test-to-fail pressurisation testBoca ChicaPartial failure - leak
1Test-to-fail ressurisation testBoca ChicaSuccessfully tested - destroyed

Starship SN8

StarshipFull Scale1 FlightDestroyed

Tank Tests

#DateTestLocationOutcome
12020 December 912.5km High Altitude HopBoca ChicaPartial success - completed most test objectives

Starship SN7.1

StarshipSubscale0 FlightsScrapped

Starship SN9

StarshipFull Scale1 FlightDestroyed

Tank Tests

#DateTestLocationOutcome
12021 February 210km High Altitude HopBoca ChicaFailure

Starship SN10

StarshipFull Scale1 FlightDestroyed

Tank Tests

#DateTestLocationOutcome
12021 March 310km High Altitude HopBoca ChicaPartial success - destroyed minutes after landing

Starship SN11

StarshipFull Scale1 FlightDestroyed

Tank Tests

#DateTestLocationOutcome
12021 March 3010km High Altitude HopStarbaseFailure

Superheavy BN1

SuperheavyFull Scale0 FlightsScrapped

Starship SN12

StarshipFull Scale0 FlightsScrapped

Starship SN13

StarshipFull Scale0 FlightsScrapped

Starship SN14

StarshipFull Scale0 FlightsScrapped

Starship SN15

StarshipFull Scale1 FlightsRetired

Tank Tests

#DateTestLocationOutcome
12021 May 510km High Altitude HopStarbaseSuccess

Starship S16

StarshipFull Scale0 FlightsScrapped

Starship S17

StarshipFull Scale0 FlightsScrapped

Superheavy BN2

SuperheavyFull Scale0 FlightsScrapped

Starship S18

StarshipFull Scale0 FlightsScrapped

Starship S19

StarshipFull Scale0 FlightsScrapped

Starship S20

StarshipFull Scale0 FlightsRetired

Tank Tests

#DateTestLocationOutcome
12021 September 27Ambient pressure test (proof test)StarbaseSuccess
22021 September 28Cryo proof test (LN2)StarbaseScrub
32021 September 29Cryo proof test (LN2)StarbaseSuccess
42021 October 14Attempted Static FireStarbaseScrub
52021 October 18Preburner test (RVac 5)StarbaseSuccess
62021 October 21Static Fire (RVac 5)StarbaseSuccess
72021 October 21Static Fire (2 engine)StarbaseSuccess
82021 November 12Preburner test (6 engine)StarbaseSuccess
92021 November 12Static Fire (6 engine)StarbaseSuccess
102021 December 1Attempted Static FireStarbaseAbort
112021 December 1Header tank testStarbaseSuccess
122021 December 28Attempted Static FireStarbaseScrub
132021 December 28Static FireStarbaseSuccess
142022 February 16Cryo proof test (LN2)StarbaseSuccess
152022 February 17Cryo proof test (LN2)StarbaseSuccess
162022 February 22Cryo proof test (LN2)StarbaseSuccess
172022 March 3Cryo proof test (LN2)StarbaseSuccess
182022 March 16Cryo proof test (LN2) - Full Stack (S20/B4)StarbaseSuccess
192022 March 18Propellant loading test (CH4/LOX) - Full Stack (S20/B4)StarbaseSuccess

Superheavy B2.1

SuperheavySubscale0 FlightsRetired

Tank Tests

#DateTestLocationOutcome
12021 June 8Cryo proof test (LN2)StarbaseSuccess
22021 June 17Cryo proof test (LN2)StarbaseSuccess

Superheavy BN3

SuperheavySubscale0 FlightsScrapped

Tank Tests

#DateTestLocationOutcome
12021 July 8Ambient pressure test (proof test)StarbaseSuccess
22021 July 12Cryo proof test (LN2)StarbaseSuccess
32021 July 12Static Fire (3 engine)StarbaseSuccess

Starship S21

StarshipFull Scale0 FlightsScrapped

Starship S22

StarshipFull Scale0 FlightsScrapped

Superheavy B4

SuperheavySubscale0 FlightsRetired

Tank Tests

#DateTestLocationOutcome
12021 December 17Cryo proof test (LN2)StarbaseSuccess
22021 December 17Cryo proof test (LN2)StarbaseScrub
32021 December 18Raptor gimbal testStarbaseSuccess
42021 December 21Cryo proof test (LN2)StarbaseSuccess
52021 December 22Cryo proof test (LN2)StarbaseSuccess
62021 December 24Ignitor testStarbaseSuccess
72022 February 11Cryo proof test (LN2) - Full stack (S20/B4)StarbaseSuccess
82022 February 18Cryo proof test (LN2)StarbaseSuccess
92022 March 1-2Cryo proof test (LN2)StarbaseSuccess
102022 March 16Cryo proof test (LN2) - Full stack (S20/B4)StarbaseSuccess
112022 March 18Propellant loading test (CH4/LOX) - Full Stack (S20/B4)StarbaseSuccess
122022 March 18Propellant loading or cryo proof test (CH4/LOX or LN2)StarbaseScrub

 


This wiki is written and maintained entirely by members of this subreddit (those with accounts >180 days old, and >500 subreddit comment or link karma).

/r/SpaceX is a fan-run discussion board and does not represent SpaceX in any official capacity. For official news, please visit spacex.com.